Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Owens Corning Construction in San Francisco, CA | Moreno Valley Builders
We provide independent Owens Corning roofing installation, repair, and gutter service across San Francisco – the city, the hills, the fog, and the hundred-year-old row houses. What makes our Owens Corning work different here is straightforward: we know how these shingles, underlayments, and accessories hold up against a marine layer that never really leaves and wind that drives rain sideways into eaves. Call (877) 752-3154 for a free estimate on any Owens Corning roof project in San Francisco.
We’re Owens Corning sales & service specialists, but we’re an independent contractor – not authorized by Owens Corning and not manufacturer-affiliated. That independence matters because it means we recommend what works on the roof you actually have, not what a corporate program says to sell. Our crew has torn off and rebuilt Owens Corning roofs on pre-1906 Victorians, Edwardian row houses, and mid-rise stock throughout San Francisco service area ZIP codes 94111, 94112, 94114, and 94115. Noel Trevino, owner and general contractor at Moreno Valley Builders, grew up running jobs in the Inland Empire and has spent decades learning which roofing details fail first when they’re specified wrong. If the details aren’t right on paper, they won’t be right in the wall. Or on the roof deck.
Why San Francisco Residents Choose Us for Owens Corning Service
We specify Owens Corning because their Duration and Oakridge lines have earned their place on coastal California roofs – when they’re installed to the manufacturer’s nailing pattern over a properly ventilated deck. The problem is that most San Francisco homes were built before ventilation was even a concept. We see this every week: a roof that looked fine from the curb but was rotting from the inside because an unvented attic trapped moisture under the shingles.
Noel’s crew has spent the better part of three decades fixing exactly those kinds of failures. He started with framing, concrete, and mechanical systems coursework at Riverside City College, and then spent years on job sites where undersized headers and misread permit sets taught him what actually holds up. That background means our Owens Corning inspections in San Francisco look at the whole assembly – deck, underlayment, flashing, ventilation – not just the shingle surface. We use OEM-compatible components matched to the installed shingle line, because aftermarket substitutes don’t perform in this climate and they void warranties faster than a fog bank rolls in.
Styles & brands we work with







Common Owens Corning Construction Problems We Solve in San Francisco
- Curled shingles from marine-layer moisture. San Francisco’s persistent fog keeps roof decks damp for months. On Victorians and Edwardians with unvented attics, that moisture gets trapped beneath Owens Corning shingles and causes the seal strips to fail early. We open the ventilation path, replace damaged decking, and re-shingle with a system that can actually dry out.
- Wind-driven rain intrusion on hillside homes. In neighborhoods like Noe Valley and the Mission, storms drive rain uphill into standard drip edge. We replace inadequate edge metal with taller, properly lapped flashing before water can reach the fascia and sheathing.
- Shingle blow-offs on skip sheathing. Pre-1906 wood-frame row houses are often built with spaced boards that don’t meet Owens Corning nailing requirements. Shingles tear off at ridges and eaves in the first real wind. Fixing this requires re-decking, not re-nailing into gaps.
- Condensation trapped under underlayment. Original unvented attic spaces cause Owens Corning WeatherLock underlayments to trap condensation from below, which accelerates shingle deterioration. The fix is mechanical or passive ventilation plus a full tear-off, never a roof-over.
- Shared party wall flashing failures. Row houses with shared roof planes need coordinated flashing across property lines. We regularly re-flash one side of a shared roof while protecting the neighbor’s untouched shingles.
Owens Corning Service in San Francisco: What Local Conditions Mean for Your Equipment
Here’s the detail that never comes up in suburban re-roofs: San Francisco’s pre-1906 wood-frame row houses often share party walls and roof planes with neighbors. An Owens Corning re-roof on one side of a shared plane frequently requires coordinated access and flashing details across property lines. You can’t just tear off your half and call it done – the valley where the two roofs meet has to be flashed as a single condition, and that means talking to the neighbor, scheduling access, and sometimes pulling a shared permit. In a city where nearly every project triggers discretionary review and tight lot lines leave no room for staging, this coordination is the difference between a roof that holds for thirty years and one that leaks at the property line every winter. Noe Valley, the Mission, and the dense blocks around ZIP 94114 are where we handle these shared-plane jobs most often.
Owens Corning Models & Products We Service in San Francisco
We install and repair the full Owens Corning roofing system, not just the shingles. That includes Oakridge Shingles, the TruDefinition Duration Series, and WeatherLock Underlayments – each matched to the roof’s slope, exposure, and the home’s architectural character. Our parts policy is simple: we use genuine Owens Corning underlayments, sealants, and accessory components specified for the installed shingle line. Aftermarket substitutes void warranties and don’t survive a San Francisco winter, so we don’t stock them. We keep the most common Owens Corning components on our trucks – starter strips, ridge caps, valley metal, and WeatherLock membrane – so most San Francisco repairs don’t wait on a distributor. And when existing sheathing or flashings are compromised, we recommend full tear-off and re-deck every time. Roof-overs hide problems; they don’t fix them.
See the difference
Before
After
Before
After
Before
AfterOwens Corning Service Pricing in San Francisco
Here’s what Owens Corning roofing work typically costs in San Francisco. These are market-calibrated ranges for our area – your exact quote depends on roof access, deck condition, and the scope of flashing work:
| Service | Price Range |
|---|---|
| Roof Replacement | $9,440 – $23,600 |
| Roof Repair | $470 – $2,125 |
| Metal Roof Installation | $17,700 – $47,200 |
The biggest cost driver in San Francisco is deck prep. If your roof has skip sheathing or water-damaged plywood, re-decking adds material and labor before a single shingle goes down. Access matters too – homes on steep blocks with no street parking often require hand-carrying materials up flights of stairs. We write line-item quotes so you see exactly what’s driving the number. Call (877) 752-3154 for a free estimate, and we’ll walk your roof with you.
Serving San Francisco, CA — Our Local Coverage Area
We’re a San Francisco General Contractor based in the area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Owens Corning Construction in San Francisco
Yes. The persistent fog and moisture in San Francisco’s marine layer slows seal-strip activation and keeps roof decks damp for months at a time. Owens Corning shingles perform well here when the attic space is properly ventilated and the deck is dry before installation; without those conditions, shingles curl and seal strips fail early. We check both before any San Francisco installation. Call (877) 752-3154 for an exact assessment of your roof.
Yes. Owens Corning offers period-appropriate color ranges in the Duration and Oakridge lines that work well on Victorians and Edwardians. Historic review in San Francisco typically cares about color and material profile more than the manufacturer. We’ve matched shingles through several discretionary reviews and can provide samples and spec sheets for your application package.
A full roof replacement in San Francisco typically requires a building permit from the Department of Building Inspection, and many older homes also trigger planning review for exterior material changes. We pull permits and coordinate inspections as part of the job – from the first filing to final sign-off.
Shared roof planes require coordinated flashing across the property line. We contact the neighbor early, document the shared condition, and schedule work so the valley or shared ridge is flashed as a single assembly – even if we’re only re-roofing one side. Doing it any other way guarantees a leak where the two roofs meet. Call (877) 752-3154 and we’ll assess your shared-plane condition.
No. Skip sheathing doesn’t meet Owens Corning nailing requirements, so installing over it voids the warranty. That’s why we recommend re-decking with structural plywood before re-shingling any San Francisco home with spaced-board sheathing. It’s the only way the warranty means anything.
Service Areas Near San Francisco
Our trucks run throughout San Francisco and into the surrounding Bay Area. If you’re just across the bridge, check Owens Corning service in Chinatown or Owens Corning service in Tiburon. We also serve Moreno Valley, March Air Force Base, Loma Linda, Highgrove, Mead Valley, and Grand Terrace from our Inland Empire base.
Book Your Owens Corning Service in San Francisco Today
Whether it’s a full tear-off on a Pacific Heights Victorian or a Visitacion Valley Owens Corning service, we’ll give you a straight answer and a written line-item quote. Call (877) 752-3154 to schedule your free estimate. One contractor, every phase – including the roof.
Written by Noel Trevino, Owner & General Contractor at Moreno Valley Builders, serving San Francisco and the Bay Area.