Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Foster City, CA | Moreno Valley Builders
We install and service Mr-Glass shower enclosures, frameless doors, and custom glass across Foster City as an independent construction crew. Our Mr-Glass work here is shaped by one thing most service pages miss: Foster City homes sit on engineered bay fill that settles unevenly, which racks shower openings out of square and causes enclosures to bind, leak, and corrode faster than they would on solid ground. That means we don’t just swap parts. We re-shim, re-anchor, and re-square the opening before the new glass goes in. If your Mr-Glass enclosure is sticking or leaking, call us at (877) 752-3154 for a free estimate.
Why Foster City Residents Choose Us for Mr-Glass Service
We know the Mr-Glass product line the way a mechanic knows a specific engine: where the factory hardware holds up, where it doesn’t, and what to reach for when a hinge seizes or a curb seal lets go. Noel Trevino, our owner and general contractor, spent his early years framing, pouring concrete, and running mechanical systems, then spent the next several decades fixing what rushed crews left behind in homes across the Inland Empire and the Bay Area. The lesson that stuck: glass enclosures only work as well as the opening behind them. In Foster City Home Remodeling, that opening is rarely square. We carry genuine Mr-Glass hinges, rollers, seals, and channels for the frame profiles that require them, and we stock quality aftermarket sweeps where they outlast the factory part in a bayfront climate. One contractor for the whole job, from wall to glass to drain.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Foster City
- Corroded frame hinges and seized rollers. Foster City’s morning fog and salt-laden air get into hinge barrels and roller pins, corroding the factory finish until pivots seize or gouge the track. We replace with genuine Mr-Glass hardware and re-align the door so it rolls clean instead of dragging.
- Silicone and sweep-seal failure on the curb. On frameless Mr-Glass units, the bottom sweep and silicone bead take the brunt of daily shower use. When moisture sits in a Foster City bathroom whose exhaust is fighting bay dampness, those seals fail sooner. We replace sweeps and re-bed the silicone so water stays on the tile, not in the subfloor.
- Header and wall anchors loosening from bay-mud settlement. As the fill under a Foster City home shifts, the rough opening racks. That pulls header screws and wall anchors loose, and the door starts to drift, bind, or hang low on the hinge side. We re-shim, re-anchor, and re-square before re-hanging the glass.
- Hard-water and salt-fog haze on older glass panels. Foster City’s water runs hard, and the marine air leaves a film on shower glass that ordinary cleaners won’t cut. Where the glass is sound, we can polish and seal; where the haze has etched the surface, we’ll tell you straight that replacement is the better call.
- Doors sticking out of square on older single-family and condo openings. Homes built from the 1960s through the 1980s on Foster City’s engineered fill settle unevenly over decades. A door that once swung clean now hangs up, and no amount of hinge adjustment fixes it until the frame is re-shimmed.
Mr-Glass Service in Foster City: What Local Conditions Mean for Your Equipment
Foster City is a planned community built on fill brought in over San Francisco Bay mud, and that single fact defines almost every shower-glass job we do here. Unlike Mr-Glass in Redwood Shores down the bay or San Mateo on solid ground, Foster City’s homes rise and settle in uneven increments as the underlying bay mud compacts. A 1970s single-family home off Shell Boulevard in the 94404 ZIP might have a master bath opening that’s a quarter-inch out of square without a single cracked tile to show for it. The Mr-Glass enclosure feels that movement first: hinges bind, rollers grind, and the door drifts low enough to catch the curb. If the details aren’t right on paper, they won’t be right in the wall. When we service a Mr-Glass unit in Foster City, we check the opening before we touch the hardware, because re-hanging a door on a racked frame means the new hinge fails the same way the old one did. It’s the difference between a repair that lasts five months and one that lasts years.
Mr-Glass Models & Products We Service in Foster City
We work on the full Mr-Glass range: frameless hinged shower enclosures in 3/8 in. and 1/2 in. tempered glass, semi-frameless sliding shower doors, neo-angle corner units, and custom-cut glass panels and mirrors. Our parts stance is simple. Where the frame profile requires genuine Mr-Glass hardware, we use it. Where a quality aftermarket sweep or seal fits better and lasts longer against Foster City’s dampness, we’ll tell you that too, and show you the difference before we install it. We keep the most common Mr-Glass roller, hinge, and sweep profiles stocked for fast Foster City turnaround, and for less common profiles we order directly and schedule the swap as soon as parts land. For broader work, see our Mr-Glass sales & service overview.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Foster City
Foster City project costs track the Bay Area market but also the condition of the opening behind the glass, which is why we quote after looking at the job, not over the phone. Here are the ranges we work within:
| Service | Typical Price Range |
|---|---|
| Frameless Glass Shower Enclosure / Walk-In Shower Installation | $4,500 – $12,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
A door that only needs a sweep and hinge service lands at the low end of the repair scale. A full bathroom remodel with a new Mr-Glass enclosure, waterproofing, and tile runs higher. Every estimate is free and line-itemed, and no number changes once we start unless the scope changes. Call (877) 752-3154 to schedule yours.
Serving Foster City, CA — Our Local Coverage Area
We’re based in the Foster City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Foster City
Sticking and bottom leaks are almost always an opening problem before they’re a glass problem. Foster City’s engineered bay fill settles unevenly over time, which racks the rough opening out of square and pulls the door low on the hinge side, so it catches the curb or lets water under a compressed sweep. We re-square and re-anchor the frame, then install new sweeps and adjust the hinges. In a 1970s single-family home off Shell Boulevard, we replaced a corroded semi-frameless Mr-Glass slider whose rollers had seized and whose curb seal had failed, letting water reach the tile. Because the opening had racked from bay-fill settlement, we re-shimmed and re-anchored the new framing before setting a frameless 3/8 in. enclosure with fresh sweeps, and the door now swings true and dry. Call (877) 752-3154 for an exact quote.
Usually, yes. If the hinge barrel is corroded but the glass edge is sound and the frame isn’t rotted through, we replace the hinge with genuine Mr-Glass hardware and re-align the door. If the corrosion has eaten into the frame profile or the glass has chipped at the hinge point, replacement is the honest recommendation. We’ll show you the failure before we quote either path.
It can. Foster City sits within flood zones, and projects near the bayfront can trigger additional city review for flood and shoreline compliance, especially when waterproofing or drainage changes are part of the scope. We coordinate that with the city’s building division as part of the permit package, so the review doesn’t stall your General Contractor in Foster City project mid-remodel.
High groundwater and low-lying fill mean moisture is always working against you from below, not just from the shower spray. We focus on waterproofing details at the curb, wall transitions, and drain plane that dry-climate installers skip, and we use sealants and sweeps rated for continuous dampness. That’s the difference between a bathroom that stays dry and one that reads as damp on a moisture meter a year later.
Yes. Foster City’s townhomes and low-rise condos, especially those built in the 1960s through 1980s, have smaller rough openings and sometimes shared wall framing that changes how we anchor the glass. We’ve installed Mr-Glass frameless and semi-frameless enclosures in those units throughout the 94404 ZIP, working with the HOA where needed. Call (877) 752-3154 and we’ll look at your opening.
Service Areas Near Foster City
Our Foster City work regularly takes us to the surrounding Bay Area communities. We service Foster City service area calls, plus nearby neighborhoods like Mr-Glass service in Highlands-Baywood Park and Mr-Glass service in San Mateo. If your shower glass is binding or leaking, and you’re within reach of the Peninsula, give us a call.
Book Your Mr-Glass Service in Foster City Today
If your Mr-Glass enclosure is sticking, leaking, or showing corrosion from Foster City’s bay air, call us at (877) 752-3154. We’ll assess the glass, the hardware, and the opening behind it, then give you a free, line-itemed estimate. Independent Mr-Glass service, done right for how Foster City homes actually move.
Written by Noel Trevino, Owner & General Contractor at Moreno Valley Builders, serving Foster City and the greater Bay Area.