Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in La Verne, CA | Moreno Valley Builders
We service, repair, and install Mr-Glass windows, doors, and frameless shower enclosures across La Verne, CA as an independent contractor. The one thing that makes Mr-Glass work different here is the age of the housing stock: century-old downtown lots and 1950s-1970s foothill ranches mean openings are almost never square, so templating and shimming matter more than the glass itself. If your Mr-Glass enclosure is dragging, leaking, or pulling away from the frame, call (877) 752-3154 for a free estimate from a crew that’s worked these exact La Verne homes.
Why La Verne Residents Choose Us for Mr-Glass Service
We’ve installed and serviced Mr-Glass window, door, shower-enclosure, and storefront systems throughout the Pomona Valley and Mr-Glass in Pomona for years. We know the product lines, the common hardware failures, and the fit issues that show up when a Mr-Glass unit goes into an out-of-square opening on a 1960s ranch or a pre-war bungalow off Bonita Avenue. Noel Trevino, our owner and general contractor, grew up in Sunnymead Ranch and has spent nearly three decades rebuilding and renovating homes across the Inland Empire, often following contractors who ignored load paths or templated glass against walls that hadn’t been plumb since the Hoover administration. That background is why La Verne homeowners call us when a Mr-Glass enclosure has stopped closing right and they’re tired of wiping water off the bathroom floor. We use OEM Mr-Glass parts wherever they’re still available, we know which aftermarket hardware actually holds up in our dry inland heat, and we tell you plainly when a repair is the right call instead of a replacement.
Styles & brands we work with







Common Mr-Glass Construction Problems We Solve in La Verne
- Sweep and seal failure on sliding shower doors. La Verne’s dry summer heat bakes the vinyl sweeps on Mr-Glass frameless sliding systems until they crack and curl. Once that seal goes, water tracks onto the bathroom floor every morning. We replace the OEM sweep and check the track alignment at the same time, because a new sweep on a racked track won’t last a season.
- Out-of-square openings that rack the enclosure. Mid-century ranch homes along the Foothill Boulevard corridor and century-old lots near D Street have framing that has settled for decades. The result: the glass no longer meets the curb, the door drags, or the hinges bind. We re-shim and re-anchor the track square before anything else.
- Anodized aluminum frame corrosion and pitting. Westerly-facing Mr-Glass windows and doors take the brunt of Santa Ana wind grit. The anodized finish pits, seals abrade, and the frame starts to look tired long before the glass fails. We re-glaze where the frame is sound and replace when the corrosion has eaten through the profile.
- Roller and track wear from foothill dust. Grit off the San Gabriel foothills infiltrates sliding Mr-Glass door tracks, scoring rollers and causing binding, misalignment, and loose anchors. A new roller alone won’t fix loose anchors. We re-set the track, then install OEM-compatible rollers so the door actually glides again.
- Fogged or chipped glass panels. Between the heat, the wind, and years of hard water, Mr-Glass tempered panels in La Verne do eventually fail. If the glass is chipped, fogged, or the frame is out of square beyond shimming, replacement is the honest answer, and we’ll tell you that up front.
Mr-Glass Service in La Verne: What Local Conditions Mean for Your Equipment
La Verne’s historic downtown core along Bonita and D Street is packed with pre-war and Craftsman-era homes where Mr-Glass shower and window work almost always means templating to a wall that was never square to begin with, a challenge we also handle with Mr-Glass repair in Claremont. A century of settling on those old citrus-town lots has left studs that drift, plates that sag, and openings that vary by half an inch or more from top to bottom. That’s a different job than the clean new-build openings common in the newer foothill tracts, and it’s the reason we template every downtown La Verne job in person rather than ordering off a stock size sheet. This is also where Noel’s line holds: if the details aren’t right on paper, they won’t be right in the wall. On a 1960s ranch home off Wheeler Avenue backing toward the foothills, a homeowner’s Mr-Glass sliding shower door had been dragging for a year. The vinyl sweep was cracked from our dry summer heat and the opening had gone slightly out of plumb as the older slab moved. We pulled the door, replaced the OEM sweep and lower rollers, re-shimmed and re-anchored the track to square, and reset the door so it glides and seals clean against the curb. No new enclosure needed.
Mr-Glass Models & Products We Service in La Verne
We service Mr-Glass frameless sliding shower door systems, including Serenity-series style configurations, plus tempered glass shower enclosures with anodized or oil-rubbed bronze frames. On the window and door side, we work with Mr-Glass vinyl-frame and aluminum single-hung and sliding windows, and we’ve handled interior glass partition and storefront-style entry systems for La Verne storefronts and home offices alike. Our approach to parts is straightforward: OEM Mr-Glass replacement sweeps, rollers, hinges, and seals wherever they’re still available, so the unit keeps its original fit and warranty geometry. We only fall back to quality aftermarket hardware when OEM parts are discontinued, and we always tell the homeowner which it is. We keep common Mr-Glass hardware on our trucks for faster turnaround on La Verne jobs, because driving back out to re-do a sweep a week later serves no one.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in La Verne
Pricing for the Mr-Glass work we do most often in La Verne breaks down below. What drives the cost is mostly the scope: a sweep and roller replacement is a fraction of a full walk-in shower installation, and a tub-to-shower conversion sits in between because it means water-proofing, tile or panel work, and a new glass system all at once. Every free estimate includes a site visit, measurements, and a written line-item quote so you know exactly what you’re paying for before anything starts.
| Service | Price Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Remodel | $9,000 – $28,000 |
If you need a specific number for your La Verne home, call (877) 752-3154 and we’ll come out, look at the opening, and give you an exact quote. Estimates are free.
Serving La Verne, CA — Our Local Coverage Area
We’re based in the La Verne area and know this community well, and we also provide Mr-Glass service in Montclair. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in La Verne
Yes. We replace OEM Mr-Glass sweeps, rollers, hinges, and seals as standalone repairs whenever the frame and glass are still sound. If the glass itself is chipped, fogged, or the frame has corroded beyond repair, we’ll tell you replacement is the better call rather than patching a unit that will leak again. Call (877) 752-3154 and we’ll assess it on site.
Usually, but it won’t be a drop-in job. We shim and re-anchor the track to square against walls that have settled for a century, and we template every downtown La Verne installation in person. That’s the difference between a door that seals and a door that leaks from day one.
Yes. Foothill-adjacent lots in La Verne fall under wildland-urban-interface requirements, which means Class A roof and ignition-resistant detailing. For Mr-Glass window and door systems, we recommend impact-rated or reinforced glass options where code requires it, and we make sure the installation details won’t compromise the ember-resistance of the envelope.
The vinyl sweeps and seals dry out and crack within a few years in our inland heat, and the repeated expansion and contraction can loosen track anchors. It’s the most common Mr-Glass failure we see in La Verne. Replacing the sweep before it fails and re-torquing the anchors keeps the enclosure sealing properly. Call (877) 752-3154 for a free inspection.
No. We’re an independent construction contractor with deep experience installing and servicing Mr-Glass window, door, and enclosure systems across the Pomona Valley, but we are not authorized, sponsored, or endorsed by Mr-Glass. That independence means we recommend the repair that makes sense for your home, not the one a manufacturer program tells us to push. For more about our Mr-Glass work specifically, see our Mr-Glass sales & service page.
Service Areas Near La Verne
Our Mr-Glass service covers the La Verne service area and the surrounding Inland Empire communities. If you’re a bit further out, we also provide Mr-Glass service in Lake Forest and Mr-Glass service in Yorba Linda, plus work in Moreno Valley, Loma Linda, and the Grand Terrace area.
Book Your Mr-Glass Service in La Verne Today
If your Mr-Glass enclosure is leaking, dragging, or pulling away from the frame, call (877) 752-3154. We’ll schedule a free estimate, look at the opening in person, and tell you straight whether it’s a repair or a replacement. For La Verne homeowners and those needing Mr-Glass in Upland, that call is the fastest way to stop wiping water off the floor.
Written by Noel Trevino, Owner and General Contractor at Moreno Valley Builders, serving La Verne and the Inland Empire.