Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Mentone, CA | Moreno Valley Builders
We provide independent Jerith fence and construction service across Mentone, from aluminum ornamental runs on canyon slopes to vinyl privacy panels on the valley floor. What makes our Jerith work different here is that we plan every post footing for decomposed granite and every panel line for Mill Creek drainage, because those two conditions define construction in Mentone more than any building code does. We work as an independent contractor, not a manufacturer affiliate, and we’ve been doing it long enough to know which Jerith components hold up in this soil and which need adaptation. Call (877) 752-3154 for a free estimate.
Why Mentone Residents Choose Us for Jerith Service
Jerith aluminum and vinyl fencing is a solid product line, but it performs very differently on a crafton-area slope than it does on a flat Redlands tract lot. We know those differences because we’ve dug the footings. Noel Trevino, our owner and general contractor, grew up in the Sunnymead Ranch area and has spent close to three decades building and fixing homes and fences across the Inland Empire, including enough hillside parcels in Mentone to know what decomposed granite does to a 2-foot post hole. We stock the Jerith profiles, caps, and hardware that this area actually uses, and we’re a short drive up from Moreno Valley when a gate or panel line needs attention.
You’re not getting a distributor’s pitch from us. You’re getting a general contractor who reads the county setback language before the post hole is marked, and who will tell you honestly whether a leaning line needs re-footing or full replacement. Usually it’s re-footing.
Styles & brands we work with
Common Jerith Construction Problems We Solve in Mentone
- Leaning and racked ornamental posts on canyon slopes. The classic Mentone problem is a Jerith aluminum ornamental run where posts were set directly into decomposed granite with no concrete encapsulation. Santa Ana wind loads work those posts loose over a few seasons, and the whole panel line starts to lean. We pull and re-foot these with proper concrete collars, often reusing the existing panels and caps. The line stays plumb.
- Brittle, faded vinyl pickets on exposed runs. Jerith vinyl privacy panels on full-sun, west-facing slopes in Mentone absorb years of dry heat and UV cycling. We see cracked pickets at the rail pockets, chalky surface wear, and rails that have gone brittle enough to split under wind flex. We match Jerith OEM panels where available, so the color and profile stay consistent instead of patching with off-brand sections.
- Heaved and silted posts along the Mill Creek wash line. The flat valley floor along Mentone Boulevard is underlain by sandy alluvial wash, and when Mill Creek runs hard after winter storms, water moves through that soil in ways that heave posts and bow rails. We re-set these with deeper footings and better drainage, and we’ll tell you if the location itself is the problem.
- Panel-to-grade gaps on county-set hillside setbacks. Hillside parcels with county grade changes often leave a Jerith fence with gaps at the bottom rail that trap water and accelerate corrosion or rot. We re-plan the run to step correctly with the grade, which a flat-lot installer will often miss entirely.
- Driveway and walkway gates that bind after soil movement. Jerith aluminum gates on Mentone’s wash soils will bind and drag as the ground shifts seasonally. We re-hang and re-shim gates, and when the post set is the problem, we reset the hinge posts before touching the gate hardware.
Jerith Service in Mentone: What Local Conditions Mean for Your Equipment
Mentone is unincorporated San Bernardino County, which means every fence permit, every setback, and every grading decision runs through County Land Use Services rather than a city building department. That changes the whole sequence of a Jerith install. On a canyon-slope parcel, the county reviews the setback before a single post goes in, and the plan has to acknowledge what the digging will actually hit: decomposed granite, boulders, and soil that drains fast in summer and shifts when the winter storms funnel down Mill Creek. If the details aren’t right on paper, they won’t be right in the wall. We’ve seen footings spec’d for flat valley soil get punched into a boulder field on a crafton hillside, and the fix starts with the permit set, not the post hole. That’s the part of Jerith service in Highland and Mentone that generic fencing crews don’t plan for.
Jerith Models & Products We Service in Mentone
We install and repair Jerith’s aluminum ornamental panels, the Heritage-style picket profiles, vinyl privacy fence in the Chesterfield and Ridgeline panel patterns, vinyl picket and post-and-rail ranch fencing, and Jerith aluminum driveway and walkway gates. Our approach on parts is OEM-first: we match Jerith panels, posts, caps, and hardware wherever they’re available so profiles and colors stay consistent. We stock the common profiles in our Moreno Valley yard for faster Mentone turnaround, and we use aftermarket brackets and concrete only where they genuinely outperform the original, which on this soil is usually the concrete, not the bracket. See our broader Jerith sales & service page for the full scope of what we carry.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Mentone
Cost depends on the run length, the soil at the post locations, and how much of the existing line can be saved. Here’s where Mentone work typically lands:
| Service | Price Range |
|---|---|
| Aluminum Fence Installation | $4,000 – $10,000 |
| Vinyl Fence Installation | $3,500 – $9,000 |
| Home Addition | $45,000 – $130,000 |
Slope work and decomposed granite footings add labor, but they’re the honest cost of building in Mentone. A free estimate from us includes the soil read at the post line, the county setback check, and a written line-item quote. Call (877) 752-3154 to schedule one.
Serving Mentone, CA — Our Local Coverage Area
We’re a General Contractor in Mentone and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Mentone
No, we’re an independent Jerith in Yucaipa and Mentone service provider. We source genuine Jerith components and install and repair their fencing, but we’re not affiliated with the manufacturer. That independence means we give you the straight answer on repair versus replacement without a territory rep’s quota behind the recommendation.
Yes, and it’s a smart pairing in Mentone specifically. Many of the ADUs and additions we build on unincorporated county parcels sit close to a property line or a canyon slope, and a run of Jerith aluminum ornamental or vinyl privacy uses very little footprint while giving you a clean sightline and a defined yard. The county setback review applies, so we coordinate the fence with the ADU permit set rather than adding it as an afterthought. Call (877) 752-3154 if you’re planning both, and we’ll quote them together.
We match Jerith OEM panels, posts, caps, and hardware wherever they’re available, so the profile and color stay consistent with the rest of your line. We use aftermarket concrete and brackets only where they do a better job on Mentone’s decomposed granite and wash soils, which happens more often than you’d think.
A straightforward post re-set or gate fix is usually a day. A new fence run on flat ground is typically two to three days including concrete cure time. Hillside runs with decomposed granite footing work and county setbacks take longer, and we’ll give you a straight schedule after the site read.
Small repairs like a gate re-hang or a single post re-set run in the $400 – $800 range, but a leaning run on a canyon slope with multiple footings will land higher. The honest cost depends on how many posts are involved and what the digging hits. Call (877) 752-3154 for an exact quote, and the estimate is free.
Service Areas Near Mentone
We run Jerith service from Mentone out to the surrounding Mentone service area and into the neighboring communities. That includes Moreno Valley, Loma Linda, and Grand Terrace, plus the rural county parcels around Highgrove and Mead Valley. For the east side of the valley, see Jerith service in Calimesa. For points south down the 215 corridor, see Jerith service in Perris.
Book Your Jerith Service in Mentone Today
If a Jerith fence or gate is giving you trouble in Mentone, call (877) 752-3154 and we’ll schedule the site read. Estimates are free, and we’ll tell you straight what needs fixing and what doesn’t.
Written by Noel Trevino, Owner at Moreno Valley Builders, serving Mentone and the east San Bernardino Valley since 1996.