Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Laguna Hills, CA | Moreno Valley Builders
We provide independent Jerith fence installation, repair, and gate service across Laguna Hills, including the hillside lots of Nellie Gail Ranch and the tract homes of Moulton Ranch. What separates our Jerith work here is simple: we build and repair ornamental aluminum and vinyl fence lines the way Laguna Hills grading and drainage actually demand, not the way a flat suburban lot in the Midwest would get it. If you have a Jerith fence that’s leaning, racking, or seizing up after our winter storms, call Noel Trevino and the team at Moreno Valley Builders directly at (877) 752-3154.
Why Laguna Hills Residents Choose Us for Jerith Service
We’re a full-scope general contractor in Laguna Hills, and we’ve been installing and repairing Jerith ornamental aluminum and vinyl fencing across south Orange County for years. Since we also build additions, decks, and hardscape on these same Laguna Hills hillside lots, we read a fence line differently than a fencing-only crew might. A lean in the panels isn’t just a post problem; it’s usually a drainage problem. A racked gate on a sloped driveway is almost always a footing problem. Noel Trevino grew up in the Sunnymead Ranch area of Moreno Valley and spent three decades framing, pouring, and fixing houses across Southern California before building this company around one idea: the person who understands the whole site builds a better fence than the person who only understands the fence.
We are not affiliated with Jerith and we don’t sell their warranty. What we sell is correct installation and repair work using Jerith OEM panels, posts, and gate hardware where a match matters for color and warranty continuity, and proven aftermarket hardware only where an OEM part has been discontinued. For full Jerith sales & service context, we’re the independent crew that reads the gates, footings, and grades and builds them to last.
Styles & brands we work with
Common Jerith Construction Problems We Solve in Laguna Hills
- Racked and misaligned aluminum panels on hillside lots. Jerith rackable panel systems are designed to step with a slope, but only when the posts are set below the active soil layer. On graded fill around Nellie Gail Ranch, shallow footings let the post line drift, and the panels bind or come out of true within a season. We re-auger the post line to a deeper embedment and reset the run.
- Undercut post footings after January storm runoff. Canyon-edge lots and slopes around Moulton Ranch catch sheet flow in the winter, and water follows the post holes down into the soil. Posts loosen, pickets lean, and gate hinges start to drag. We don’t patch these; we reset the footings and, where needed, tie the fence line to the existing retaining wall so runoff sheets away.
- Brittle, cracking vinyl on original 1970s-80s privacy runs. Decades of semi-arid sun on the west-facing pickets in and around the Laguna Hills and Moulton Ranch tracts leaves Jerith vinyl brittle and prone to splitting at the rails. We can replace individual sections with matching Jerith Portsmouth vinyl panels without tearing out the whole run.
- Seized or sagging gate latches on sloped driveways. The hinge-side post settles a little, the gate drops, and the latch stops engaging. On a Jerith double-drive gate spanning a slope, that misalignment compounds fast. We square the posts and re-hang the gates so they swing clean.
- Pool barrier and deck-tied fence lines stalled at city plan check. This one is pure Laguna Hills. More on it below.
Jerith Service in Laguna Hills: What Local Conditions Mean for Your Equipment
Laguna Hills was incorporated in 1991 out of Laguna Hills and portions of El Toro, and unlike cities that route plan check through a county office, our building department runs it locally. That detail shapes how any Jerith fence tied to a pool barrier, deck project, or room addition moves through the system here. On a Nellie Gail Ranch hillside lot, a Jerith Appalachian aluminum fence that’s part of a pool barrier submittal has to answer slope and drainage questions in the same set of plans as the pool itself. If those answers aren’t pre-thought on the first pass, the whole job stalls at the counter. We’ve been through that enough times to draw the fence plan the way plan checkers here want to see it: post embedment depths called out, drainage arrows shown, retaining wall tie-ins noted. That’s not a fence detail for most contractors; it’s the thing that gets your permit issued the first time. If the details aren’t right on paper, they won’t be right in the wall.
On a Nellie Gail Ranch lot off Nellie Gail Road, we pulled up to a Jerith Appalachian aluminum fence along the slope edge that had leaned and seized after two winters of runoff undercut the shallow footings — a typical Coto De Caza Jerith service call we handle regularly. We pulled the racked sections, re-augered the post line to a deeper embedment below the active soil, re-set the gate hardware, and tied the run to the existing retaining wall so storm water sheeted away instead of undercutting the panels. The finished line came back true and the walk gate swings clean again.
Jerith Models & Products We Service in Laguna Hills
We service the full Jerith ornamental and vinyl lineup across the 92653 and 92654 ZIP codes: Appalachian series aluminum ornamental fence, Renaissance series aluminum fence, Portsmouth vinyl privacy fence, and the matching aluminum walk gates and double-drive gates. Our approach on parts is straightforward. If a panel, post, or gate latch is still in production, we use the Jerith OEM part so the color and warranty line up with your existing run. If it’s discontinued, we’ll say so and install a quality aftermarket hinge or latch rather than telling you a story about a “matching” part that isn’t. For straight post-and-panel runs in good native soil, we repair. For racked or undercut footings, we reset properly. No patch jobs, no shims hidden under post caps.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Laguna Hills
What you’ll pay depends on the panel run length, the slope, and whether we’re repairing, resetting, or doing a full installation. Here are the ranges we work within across Laguna Hills:
| Project | Typical Laguna Hills Range |
|---|---|
| Aluminum Fence Installation | $4000 – $10000 |
| Vinyl Fence Installation | $3500 – $9000 |
| Home Addition | $45000 – $130000 |
Post-footing depth and whether drainage correction is needed are the two biggest cost drivers on hillside lots. A flat Moulton Ranch tract run is materially different from a Nellie Gail slope-edge run that needs re-augering and retaining-wall tie-in. Our free estimate includes a written, line-item look at the existing fence, the grade, and what the repair actually requires. Call (877) 752-3154 and we’ll walk the line with you.
Serving Laguna Hills, CA — Our Local Coverage Area
We’re based in the Laguna Hills area and know this community well, including our Jerith in Lake Forest customers just up the road. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Laguna Hills
Yes, in almost every case, because we use current Jerith OEM panels, posts, and gate hardware when they’re still in production. Color match on the Appalachian and Renaissance aluminum lines is generally excellent when the run hasn’t had decades of sun fade on a west-facing slope, and we’ll tell you honestly if the sun has shifted the original powder coat enough that a sectioned-in panel will read slightly fresh. That’s the smart time to consider replacing the full weather-facing side rather than doing it panel by panel. Call (877) 752-3154 for an exact look at your run, and we’ll tell you which approach makes sense.
No, and we’re upfront about that. Moreno Valley Builders is an independent general contractor serving Laguna Hills. We’re not affiliated with Jerith, we don’t sell their warranty, and we don’t route your repair through a manufacturer’s third-party service queue. What we bring is hands-on experience installing and repairing their Appalachian, Renaissance, and Portsmouth lines on the exact hillside, drainage, and plan-check conditions that define Laguna Hills.
Most single-panel replacements, latch resets, and post re-alignments on straight runs are done in a day. Hillside work that requires re-augering footings below the active soil layer, resetting a run along a retaining wall, or pulling sections affected by past drainage issues takes longer, usually two to three working days once the materials arrive. Plan-check-tied projects like pool barriers add their own calendar time because the city reviews them locally. We’ll give you a straight schedule after we walk the line.
We install and repair the Jerith Appalachian series aluminum ornamental fence, the Renaissance series aluminum fence, the Portsmouth vinyl privacy fence, and all matching aluminum walk gates and double-drive gates. That includes rackable panel runs on sloped lots, which are common around Nellie Gail Ranch and the canyon-edge lots in Moulton Ranch, and we’ve handled similar Jerith repair in Mission Viejo hillside properties. If it’s Jerith and it’s on a slope, we’ve likely worked on one.
Small repairs like a sagging latch or one pulled post on a flat tract lot typically fall in the low hundreds. Full aluminum fence installation in Laguna Hills runs $4000 – $10000, and full vinyl fence installation runs $3500 – $9000. Hillside work at the upper end of those ranges costs more because of deeper post embedment, drainage correction, and the retaining-wall tie-ins that stop the lean from coming back. Call (877) 752-3154 for a free, written estimate on your specific line.
Service Areas Near Laguna Hills
We run Jerith fence and gate crews throughout south Orange County. In addition to our work across Laguna Hills service area neighborhoods, we regularly take on Jerith repairs and full installs in Jerith service in Laguna Woods, where the original 1960s-70s fence lines are reaching replacement age, and in Jerith service in Tustin, where larger flat-lot homes and newer vinyl runs keep us busy on replacement and gate hardware work. If you’re near the border of any of these cities, we’ll likely be on site within the week.
Book Your Jerith Service in Laguna Hills Today
Whether it’s a leaning Appalachian run on a slope, a seized gate on a driveway, or a pool-barrier fence that needs to survive plan check the first time, we’ll give you a straight answer and a written line-item estimate. Call Noel Trevino and the team at Moreno Valley Builders at (877) 752-3154 today.
Written by Noel Trevino, Owner and General Contractor at Moreno Valley Builders, serving Laguna Hills and the surrounding south Orange County communities.