Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Construction in Highland, CA | Moreno Valley Builders
We provide independent Belgard paver and wall installation, repair, and re-leveling across Highland, from the mid-century tracts near Baseline to the hillside lots off Boulder Avenue. What separates our Belgard service in Loma Linda and Highland work here is that we plan every installation around two realities most contractors don’t address until they fail: expansive clay soil and wildland-urban interface fire codes. If you’re pricing a Belgard paver driveway, patio, or retaining wall, call Moreno Valley Builders at (877) 752-3154 for a free line-item estimate, backed by over a decade of hands-on Belgard installs in the Inland Empire.
Why Highland Residents Choose Us for Belgard Service
We’ve torn out enough failed paver jobs to know that Belgard products perform only as well as the base beneath them. That’s why we specify deeper excavation here than most crews will quote, because Highland’s clay does not forgive shortcuts. Noel Trevino, our owner and general contractor, grew up in Sunnymead Ranch and has spent nearly three decades building and renovating across the Inland Empire. When a Highland homeowner calls us about sinking pavers or a retaining wall that’s started to lean, we’re usually looking at a Belgard repair in Muscoy base problem, not a product problem. We carry Belgard OEM edge restraints and joint sand for warranty-critical repairs, and we stock premium base rock and geogrid so we’re not waiting on a supply house when your driveway needs to be rebuilt before the next Santa Ana season.
We’re a full-scope general contractor, which matters more than people expect. A Belgard patio that drains into your foundation is a structural problem, not a hardscape problem. We handle both under one roof.
Styles & brands we work with
Common Belgard Construction Problems We Solve in Highland
- Base failure from expansive clay soils. Highland’s foothill neighborhoods sit on clay that swells with winter moisture and contracts through the dry season. Pavers set on a standard 4-inch base will heave and settle within a few years. We over-excavate to 8 – 12 inches, compact in lifts, and add geogrid where the slope demands it.
- Efflorescence and surface color loss. Intense UV exposure and the dry, abrasive Santa Ana winds beat on paver faces every fall. When joint sand blows out and joints stay dry, pavers shift and surface pigment fades unevenly. We re-sand with polymeric sand suited to windy, high-UV conditions and can apply a compatible sealer when the homeowner wants it.
- Edge restraint failure during wind events. We’ve seen paver edges lift and scour on exposed Highland slopes when restraints were pinned too shallow or joint sand had already eroded. We reset edges with Belgard’s restraint system, driven to full depth, especially on driveways where vehicle load meets wind exposure.
- Permeable paver drainage clogging. On Belgard permeable systems, Highland’s fine clay particles wash into the open joints during winter rains and choke infiltration. The system stops draining, water ponds, and the pavers sit in standing water. We service these by removing clogged joint material, flushing the base where possible, and re-filling with the correct aggregate specification.
- Cracked and settled concrete adjacent to paver work. A lot of Highland homes have older concrete driveways and walkways that have already failed in the clay. When we replace a driveway with Belgard pavers, we’re often also repairing the concrete transition at the garage apron, so the two surfaces meet clean and drain correctly.
Belgard Service in Highland: What Local Conditions Mean for Your Equipment
Highland’s hillside neighborhoods, especially those climbing off Boulder Avenue and around the base of the Belgard in Redlands foothills, sit on expansive clay that shifts with seasonal moisture. This is not a minor soil quirk. It is the single biggest reason paver installations fail in this part of the city. A patio or driveway built with a standard base depth and no reinforcement will move, sometimes within two wet seasons. That’s why we take a different approach here than we would in the flatlands below. For any Belgard installation on Highland clay, we over-excavate to 8 to 12 inches, lay geogrid reinforcement, and compact the base in lifts before the bedding layer goes down. This adds a day or two to the job and a few dollars per square foot, but it’s the difference between a paver surface that stays flat for twenty years and one that looks like a washboard after two. Our crew recently installed a Belgard Mega-Lafitt driveway for a homeowner off Boulder Avenue whose original concrete had cracked and settled in exactly this way. We over-excavated 12 inches, put down geogrid and compacted base rock, then set the pavers with enhanced edge restraints to handle the slope. The result is stable, fire-resistant, and moves water away from the foundation instead of toward it.
Belgard Models & Products We Service in Highland
We install and repair the full Belgard line, but four product families show up most often in Highland work. Mega-Lafitt is our go-to for sloped driveways because the larger-format stones handle grade changes without looking busy, and the thicker paver holds up under vehicle load on clay. Cambridge Cobble is a classic for patios and walkways around mid-century ranch homes, and it’s easy to match when we’re restoring an older install. Weston Stone and Catalina Grana are often spec’d for retaining walls and accent areas where homeowners want a more finished face. When repairing existing work, we use Belgard OEM edge restraints and joint sand for anything the warranty touches. For base rock, filter fabric, and drainage components, we select high-quality aftermarket products that meet or exceed ASTM standards, because that’s where the right material for Highland’s soil profile matters more than the brand stamp. For broader Belgard product work elsewhere in the region, see our Belgard sales & service page.
See the difference
Before
After
Before
After
Before
AfterBelgard Service Pricing in Highland
Pricing depends on access, slope, and what’s under the existing surface. A flat paver patio on stable ground is one thing. A hillside driveway on Highland clay with a failed concrete base is another. The table below reflects what we typically see across Highland projects, including excavation, base, geogrid where needed, and Belgard materials.
| Service | Typical Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Concrete Driveway Installation | $4,500 – $12,000 |
Every estimate is free and line-itemed. You’ll see excavation depth, base material, geogrid, paver product, edge restraints, and joint sand separated out, so you know exactly what you’re paying for. If a contractor quotes half of what another does, ask about base depth. In Highland, that’s where the money goes. Call (877) 752-3154 for a written estimate on your project.
Serving Highland, CA — Our Local Coverage Area
We’re based in the Highland area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Belgard Construction in Highland
Expansive clay swells and shrinks with seasonal moisture, which is why we over-excavate to 8 – 12 inches and use geogrid reinforcement on most Highland paver projects, particularly in the foothill neighborhoods. Standard 4-inch bases will eventually fail here. The fix is in the prep, not the paver. Call (877) 752-3154 to have us assess your soil and recommend a base depth that will hold.
Yes. Belgard concrete pavers are non-combustible and can be part of a defensible-space strategy. What matters for WUI compliance is where and how the hardscape meets the home: ember-resistant vents, non-combustible skirting within five feet of the structure, and clean drainage all come into play. We stay current with Belgard in San Bernardino County WUI codes and coordinate with our masonry and stucco crews so the whole perimeter meets code. If you’re planning a paver patio or walkway within the five-foot zone, call us at (877) 752-3154 and we’ll spec it correctly from the first drawing.
For sloped driveways we recommend Mega-Lafitt. The larger format handles grade changes cleanly, and the paver’s thickness gives it better load-bearing on clay soils. We also spec enhanced edge restraints pinned to full depth, because slope plus wind can lift paver edges if the restraint isn’t right. We’ll show you Mega-Lafitt alongside Cambridge Cobble and Weston Stone so you can choose what fits your home. Estimates are free – call (877) 752-3154.
With Santa Ana winds pulling poly sand out of joints every fall, we advise Highland homeowners to inspect joints each spring. If you can see joint gaps or sand is loose, schedule a re-sand. Most properties need re-sanding every three to five years, faster on exposed slopes. It’s a low-cost maintenance step that prevents edging failures and paver drift. Call (877) 752-3154 and we’ll take a look while we’re in the area.
In some cases, yes. Hardscape within the defensible-space zone around the home may fall under WUI requirements, and anything that changes grade or drainage will need proper permitting. We pull permits when required and coordinate with inspectors, so you’re not left holding an un-permitted patio or a code correction notice. For an exact answer on your lot, call (877) 752-3154 – we’ll check the parcel and code requirements before we ever dig.
Service Areas Near Highland
Moreno Valley Builders serves Highland and the surrounding Inland Empire communities, including Loma Linda, Grand Terrace, Highgrove, and Moreno Valley. We also handle Belgard paver work for homeowners in Belgard service in Romoland and Belgard service in Rialto. If you’re just outside the city limits, call and ask. We’re likely already scheduled in your area. Learn more about the areas we cover on our Highland service area page.
Book Your Belgard Service in Highland Today
We’re a licensed general contractor managing your Belgard project from first excavation to final compaction, including permits and inspections. One contractor, every phase. Call (877) 752-3154 today to schedule your free, line-itemed estimate in Highland. We’ll walk the site, check the soil, and spec the right base for the job.
Written by Noel Trevino, Owner & General Contractor at Moreno Valley Builders, serving Highland and the Inland Empire.