Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Construction in Lompico, CA | Moreno Valley Builders
We provide independent Belgard hardscape installation and repair across Lompico, from paver driveways on steep private lanes to patio and retaining wall work around rebuilt canyon homes, and we also offer Belgard repair in Felton. What makes our Belgard work different here is simple: we plan every base, edge restraint, and drainage detail around Lompico’s narrow access roads, clay-and-rock subgrade, and wildfire-rebuild grading. Call (877) 752-3154 for a free estimate on your Belgard project.
Why Lompico Residents Choose Us for Belgard Service
We’re not a paver subcontractor who shows up with a skid steer and a catalog. Moreno Valley Builders is a Lompico General Contractor, and we specify Belgard because their paver and wall systems hold up when the base is right and the drainage is graded correctly. Around Lompico, that’s the whole job. Our owner, Noel Trevino, grew up in Sunnymead Ranch and has spent close to three decades fixing the same class of mistake: bases set on uncompacted fill, edge restraints that flex, joint sand that washes out after one wet season. When he sends a crew up a Lompico canyon road, the crew already knows what the subgrade will look like before they cut the first edge.
We carry Belgard’s own pavers, wall units, edge restraints, and joint sand rather than lookalike aftermarket product. Color and dimension mismatches show badly on a repair, and they void any argument that the install met spec. If you’re in Lompico and your Belgard surface is failing, or you need Belgard in Mount Hermon, we’ll tell you whether it’s a re-set or a full pull-and-rebuild. We won’t patch over a bad base.
Styles & brands we work with







Common Belgard Construction Problems We Solve in Lompico
- Efflorescence bloom on gray Belgard pavers. Lompico homes run on private wells with hard, mineral-heavy water. When that water gets used for irrigation or washdown, it leaves a chalky white deposit on gray Belgard surfaces. It’s cosmetic, not structural, but it looks wrong. We clean it properly and adjust the water contact points so it doesn’t come right back.
- Base failure and edge creep on sloped driveways. When the original installer didn’t over-excavate for Lompico’s clay-and-rock subgrade and winter runoff, pavers ripple and joints open after a wet season. We see this constantly on canyon driveways. The fix is a full over-excavation to stable subgrade, compacted lifts, and a real edge restraint, not a cosmetic re-sand.
- Polymeric joint sand washing out on steep patios. Where drainage got graded toward the house, or where a winter debris flow crosses the hardscape, the joint sand disappears. Then pavers start shifting. We re-grade the fall away from the structure and re-sand with Belgard’s recommended joint material.
- Wall and step units settling on post-CZU fill. A lot of Lompico lots got re-graded after the 2020 fire, and some of that fill wasn’t engineered. Retaining walls and step courses set on it settle unevenly. We set new footings to solid ground and re-stack the wall properly.
- Access-limited builds that never got a proper base. When a concrete truck can’t reach a Lompico site, some contractors cut corners on the paver base. The pavers go down fast, but the failures show up within two winters. We plan the base to carry equipment loads, not just foot traffic.
Belgard Service in Lompico: What Local Conditions Mean for Your Hardscape
Lompico’s narrow private canyon roads often can’t take a loaded concrete or pump truck. Off Lompico Road and up the side lanes, the turns are tight, the grades are steep, and there’s no room to stage a big pour. That’s exactly why a properly built Belgard paver driveway or patio matters so much here. The pavers often become the last-reach access surface, the part of the property that has to handle equipment, delivery loads, and fire-season vehicle access. Materials get staged down the lane and hand-carried to the site. The base itself may have to carry loads a flat suburban job never sees. If that base isn’t over-excavated and compacted in lifts, the whole surface fails within a couple of rainy seasons. We build Lompico Belgard surfaces for those loads from the first lift of base rock.
On a steep private lane off Lompico Road, we rebuilt a Belgard Lafitt Rustic Slab driveway that had heaved after a wet winter because the original base sat on uncompacted fill from the homeowner’s post-CZU rebuild. We over-excavated to stable subgrade, reset the base in compacted lifts, re-laid the existing pavers with fresh edge restraint, and re-sanded the joints. That drive has held through two rainy seasons since. If the details aren’t right on paper, they won’t be right in the wall, or in this case, in the base.
Belgard Models & Products We Service in Lompico
We work with the Belgard lines most common on Lompico properties, and also handle Belgard in Brookdale and nearby communities: Mega-Lafitt and Lafitt Rustic Slab pavers for driveways, Catalina Grana and Catalina Slate for patios and walkways, Weston Stone and Brussels Dimensional units for retaining walls and steps, and Aqua-Roc permeable pavers where drainage or defensible-space grading calls for a surface that lets water through. On repair work, we match the existing Belgard product rather than swapping in something close. We stock the standard paver colors and joint sands for fast Lompico turnaround, and we order the less common wall and step units as soon as the job is scoped. As an independent installer, we’re not authorized, sponsored, or warranted by Belgard. We’ll also tell you plainly when a Belgard product is the wrong choice for your slope or drainage, even if it means less paver work for us.
See the difference
Before
After
Before
After
Before
AfterBelgard Service Pricing in Lompico
Pricing for Belgard work in Lompico depends on access, base depth, and how much of the existing subgrade has to come out. A small patio re-set costs far less than a full driveway rebuild on a steep lane with hand-carry access. Here are the line-item ranges we work within:
| Service | Typical Range in Lompico |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Concrete Driveway Installation | $4,500 – $12,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
| Home Addition | $45,000 – $130,000 |
Every estimate starts with a site visit. We look at the access, the existing base, the drainage, and the fire-season requirements before we put a number on paper. You’ll get a written line-item quote so you can see exactly where the money goes. Call (877) 752-3154 and we’ll get your Lompico property on the schedule.
Serving Lompico, CA — Our Local Coverage Area
We’re based in the Lompico area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Belgard Construction in Lompico
Yes, and in many cases a paver driveway is the better choice on a tight canyon lane because materials can be staged and hand-carried where a truck can’t go. We over-excavate the base so it carries real equipment loads, not just car traffic, and we set the edge restraints deep. Call (877) 752-3154 for a site visit and a quote specific to your lane’s grade and access.
It starts with over-excavating the base to stable subgrade and building it back up in compacted lifts, then keeping water moving away from the paver field. Lompico’s clay-and-rock subgrade and winter runoff will heave anything set on uncompacted fill. We also make sure the edge restraint is actually anchored, because that’s what keeps the field from creeping on a slope. Call (877) 752-3154 and we’ll assess what your existing base needs.
Yes. A properly installed paver patio is a noncombustible, low-fuel surface, and it can be part of your defensible space plan when it’s placed and graded correctly. We coordinate Belgard hardscape with the fire-safety and drainage requirements that Lompico rebuilds now have to meet, so your patio does double duty without working against your grading plan.
That’s efflorescence, and it’s especially common in Lompico because the well water used for irrigation is mineral-heavy. Water evaporates off the paver surface and leaves the minerals behind as a white bloom. It isn’t structural, but it looks worn. We clean the surface and adjust the water contact points so the bloom doesn’t keep coming back in the same spots.
We match Belgard product to Belgard product, same line, same color, same dimension, rather than substituting a lookalike. Where a paver line has aged or weathered, we’ll blend the repair field as closely as the product allows and be honest about any color difference before the work starts. Call (877) 752-3154 and we’ll take a look at your existing surface.
Service Areas Near Lompico
We serve Lompico and the surrounding Santa Cruz Mountains communities, including Ben Lomond, Felton, Boulder Creek, and Zayante. For Belgard service in Ben Lomond, we run the same base-depth and drainage standards we use on Lompico canyon lots. Over the hill, we also cover Belgard service in Cambrian Park for flatter suburban hardscape work. See our full Lompico service area for coverage details, or visit our main Belgard sales & service page to compare product lines and repair approaches.
Book Your Belgard Service in Lompico Today
We build Belgard hardscape that survives Lompico winters and fire-season requirements, not just paver jobs that look good on day one. Call (877) 752-3154 for a free, no-pressure site visit and a written line-item estimate, and we’ll take it from the base up.
Written by Noel Trevino, Owner and General Contractor at Moreno Valley Builders, serving Lompico and the Santa Cruz Mountains with full-scope construction and Belgard hardscape installation.