Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Redwood Shores, CA | Moreno Valley Builders
We provide independent Unilock paver and wall installation, repair, and replacement across Redwood Shores, CA. What makes our work different here is simple: we build Unilock systems for bayfront ground, not generic dirt. If you’re planning a paver driveway or patio in the 94065 ZIP code, the base under the pavers matters more than the paver itself. Call (877) 752-3154 for a free estimate.
Noel Trevino, Owner & General Contractor at Moreno Valley Builders, grew up building and renovating homes across the Inland Empire and brings nearly three decades of hands-on construction experience to every Redwood Shores project. Our crew has installed and serviced Unilock pavers and walls throughout the Peninsula, and we’re not authorized, sponsored, or endorsed by Unilock. We’re simply the contractor Redwood Shores homeowners call when a paver job has to hold up to salt air, wind-driven rain, and a high water table. We handle Unilock sales & service with a material-savvy approach: we specify, source, and install, so one accountability runs from permit to punch list.
Why Redwood Shores Residents Choose Us for Unilock Service
Most paver failures in Redwood Shores aren’t paver failures. They’re base failures. The pavers themselves, Unilock Brussels Block or Beacon Hill, are tough. What gives way is the ground underneath.
Because we operate as a full-scope general contractor, we read the whole site before we lay a single paver. Drainage. Slope. Soil. Water table. We know that the flat lots off Marine Parkway hold water differently than Unilock in San Carlos. We know the bayfront salt air will eat standard steel edge restraints within a few seasons. We specify corrosion-resistant alternatives from the start.
Our owner, Noel Trevino, has spent the better part of three decades fixing projects that went sideways. Room additions with undersized headers. Bad subfloors. Paver jobs with no geotextile separation. He says it plainly: “If the details aren’t right on paper, they won’t be right in the wall.” Same goes for the base. We plan the details before we break ground.
We work with 50+ name-brand manufacturers across hardscaping, cabinetry, countertops, plumbing, roofing, windows, and prefab structures. That matters because your paver project isn’t happening in a vacuum. A new Unilock driveway often ties into drainage, fencing, or a walkway to an ADU. We coordinate all of it under one roof. One Redwood Shores General Contractor. Every phase.
Styles & brands we work with
Common Unilock Construction Problems We Solve in Redwood Shores
- Loose pavers and shifted patterns from corroded edge restraints. Salt-laden air and wind-driven moisture off the bay accelerate corrosion of standard steel edge restraints and fasteners. Once the restraint fails, the outer course of pavers drifts, and the whole pattern loosens. We replace them with corrosion-resistant restraints and re-seat the affected pavers.
- Uneven settling and paver lippage on bay mud. Redwood Shores sits on engineered fill over bay mud. If the base wasn’t built for weak, saturated soils, pavers sink unevenly and create trip hazards. We excavate, stabilize with geotextile fabric, and rebuild the base so it drains instead of failing.
- Efflorescence and algae growth on shaded pavers. Flat lots and poor drainage in Redwood Shores keep moisture near the surface. That white chalky film on Unilock pavers is efflorescence, and the green growth is algae. Both come from persistent moisture. We correct the drainage and clean and re-seal the pavers where appropriate.
- Joint sand erosion from wind-driven rain. Rainy-season storms off the Bay push water horizontally. Weak or improperly set joint sand washes out, leaving pavers to grind against each other. We use high-quality polymeric sand that sets firm and resists erosion.
- Failed bases under driveways near the waterfront. We regularly replace paver driveways in Redwood Shores where the original base was built thin to save money. Add a high water table and you get ruts within two seasons. We rebuild with an engineered base that matches what the city’s geotechnical requirements demand.
Unilock Service in Redwood Shores: What Local Conditions Mean for Your Equipment
Here’s what you won’t read on a generic Unilock page. Redwood Shores is a master-planned community built almost entirely on engineered fill over bay mud during the last 45 years. The whole neighborhood sits on ground that was once water. Any paver excavation deeper than a couple of feet routinely hits the water table. In neighborhoods off Marine Parkway and Bridge Parkway, we’ve hit water just 30 inches down.
That changes everything about how a Unilock installation gets built here. The city wants a geotechnical report before issuing permits for significant excavation. You’ll likely need dewatering, which adds time and cost that homeowners in Unilock in San Mateo or Belmont, on firmer ground, never face. Skip that step and your driveway looks fine for a year, then settles into a bowl. We design every Unilock base in Redwood Shores for saturated ground from day one. Geotextile separation. Open-graded drainage. Corrosion-resistant edge restraints. It’s not optional here, it’s the difference between a patio that lasts 30 years and one that fails in three.
Unilock Models & Products We Service in Redwood Shores
We install and service Unilock Brussels Block, Beacon Hill, Thornbury, and Copthorne pavers, along with Unilock wall systems. Brussels Block and Beacon Hill remain the most common choices in Redwood Shores for driveways and patios, while Thornbury and Copthorne show up in walkways and pool decks.
For repairs, we use OEM Unilock pavers and accessories whenever possible to keep color and dimensional consistency. We also source high-quality aftermarket polymeric sands and edge restraints that meet or exceed OEM specs for coastal environments. When we assess a repair, we check whether the existing base can be salvaged. If it can’t, we recommend full replacement rather than patching over a failing base and billing you twice. Your project. Your material choices.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Redwood Shores
Pricing for Unilock work in Redwood Shores runs slightly higher than inland cities because of the geotechnical and dewatering requirements. What drives your cost: paver selection, total square footage, access, drainage needs, and whether we’re repairing an existing base or building new from scratch.
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
A free estimate includes a site visit, base assessment, drainage review, and a written line-item quote with fixed pricing and no change orders. Call (877) 752-3154 to schedule yours.
Serving Redwood Shores, CA — Our Local Coverage Area
We’re based in the Redwood Shores area and know this community well, and we also offer our Home Remodeling in Redwood Shores. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Redwood Shores
No. For most paver installations in Redwood Shores that involve excavation deeper than a couple of feet, the city expects a geotechnical report before issuing permits. That’s because the entire community sits on engineered fill over bay mud, and the high water table creates settlement risk. We include geotechnical coordination in our estimates. Call (877) 752-3154 and we’ll walk you through the process.
Efflorescence comes from water moving through the paver and leaving mineral deposits behind as it evaporates. In Redwood Shores, flat lots and bayfront moisture make it common. We prevent it by building proper base drainage so water doesn’t sit under the pavers, using the right joint sand, and sealing pavers where appropriate. If efflorescence is already there, we clean it and address the drainage that caused it.
We recommend corrosion-resistant edge restraints, typically aluminum or heavy-duty composite, instead of standard steel. Salt-laden air off the Bay accelerates steel corrosion, and once the edge fails, your pavers start to drift. We’ve seen standard steel edge restraints rust through within a few seasons near the waterfront.
It usually adds to the cost. If we hit groundwater during excavation, we have to dewater before building the base. That means pumps, extra labor time, and possibly a geotechnical report. Those costs don’t exist in cities on firmer ground. It’s the single biggest reason Redwood Shores paver projects can run $1,500 to $4,000 more than comparable work inland. Call (877) 752-3154 for an exact quote, the estimate is free.
We use OEM Unilock pavers and accessories whenever possible, including Unilock’s recommended base and joint materials where they make sense for coastal conditions. For joints, we often specify high-quality aftermarket polymeric sands that perform better against wind-driven rain in Redwood Shores. We match the product to what your site actually needs, not what’s easiest to grab from the yard.
Service Areas Near Redwood Shores
Our Unilock service area covers Redwood Shores and extends across the Peninsula, including Unilock service in Belmont and Unilock service in Foster City. We also serve San Carlos, Menlo Park, and San Mateo. For a broader look at where we work, see our Redwood Shores service area page.
Book Your Unilock Service in Redwood Shores Today
We’re ready to assess your paver project, walk the site, and put a written line-item quote in your hand. Same-day or next-day site visits are available for urgent situations. Call (877) 752-3154 and we’ll schedule your free estimate.
Written by Noel Trevino, Owner & General Contractor at Moreno Valley Builders, serving Redwood Shores and the Peninsula with full-scope construction and hardscape services.