Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in La Verne, CA | Moreno Valley Builders
Unilock pavers, walls, and steps in La Verne demand a different approach than most hardscape work, and the core answer is simple: we’re an independent installer focused on retrofit construction across built-out ranch lots and foothill streets. What makes our work here different is that we treat Unilock as a system, not a stack of blocks. If you’re planning a paver driveway, patio, or segmental wall in the 91750 ZIP, call us at (877) 752-3154 for a free estimate.
Why La Verne Residents Choose Us for Unilock Service
We’ve set Unilock pavers and walls on enough La Verne frontages to know what holds up and what doesn’t. Noel Trevino grew up in Sunnymead Ranch and has spent the better part of three decades building and renovating homes across the Inland Empire, so he’s seen what inland heat, Santa Ana winds, and compacted clay subgrades do to hardscape over time. Unilock’s tumbled units and segmental wall systems are good products, but their performance in La Verne turns on base preparation, edge restraint, and joint sand selection. We’re a full-scope general contractor, not a paver-only crew, which means we handle drainage, apron transitions, and slope work the same day we set the pavers. Our Unilock sales & service work covers everything from new installations to repairs on systems that were never properly bedded the first time.
Styles & brands we work with
Common Unilock Construction Problems We Solve in La Verne
- Efflorescence and salt bloom on tumbled pavers. La Verne’s hot, dry summers followed by winter rain pull mineral salts through the paver surface. Most of the time the bloom isn’t a product defect; it’s trapped moisture from a base or drainage layer that never got compacted right. We strip, clean, and re-set only as far as the problem actually goes.
- Polymeric sand loss on driveways and patios. Seasonal Santa Ana winds scour unsheltered joints on foothill-adjacent lots. Where old installs used the wrong sand or skipped a proper void-fill pass, we re-sand with a compatible polymeric product and re-grade the drainage so water doesn’t wash it out from underneath.
- Segmental wall settlement and face cracking. On hillside streets off Wheeler, walls set on under-compacted base against a slope start to bow and crack within a few seasons. We tear the wall back, re-build the base in lifts, and re-set the existing Unilock Estate Wall units when they’re still sound.
- Edge restraint failure at driveway aprons. Older La Verne lots often have original concrete aprons that were never cut back properly before a paver driveway went in. The pavers spread outward under vehicle load. We cut the apron clean, set Unilock’s edge restraint system, and tie the transition to the street pitch.
- Base failure under patio retrofits. Mid-century ranch frontages near the historic downtown were graded for lawn, not hardscape. Paver patios that went in over the old lawn grade eventually sink. We correct the slope, compact a proper aggregate base, and re-set the units so they stay put.
Unilock Service in La Verne: What Local Conditions Mean for Your Equipment
La Verne is hemmed in by the San Gabriel foothills and neighboring cities, which means almost no greenfield lots exist here. A paver driveway or patio in this city is a retrofit into a century-old downtown lot or a 1950s – 70s ranch frontage where the existing slope, apron, and drainage were never designed for a hardscape build. That’s the specific, checkable fact most hardscape contractors miss when they take a La Verne project: the site was graded for lawn and gravity-fed drainage toward the street, not for a compacted base that sheds water across its surface. In practical terms, every Unilock installation we do in La Verne starts by correcting what was never built for the load it’s about to carry. If the details aren’t right on paper, they won’t be right in the wall. On a mid-century ranch frontage near the historic downtown along Bonita, our crew tore out a heaved concrete apron and set a Unilock Brussels Block driveway on a compacted aggregate base with new edge restraint and pitch to the street. The homeowner had been losing polymeric sand every Santa Ana season; re-grading the base and re-sanding with the correct joint sand stopped the washout, and the tumbled units tied the frontage to the older craftsman-era block instead of fighting it. That’s what La Verne service area work looks like when you treat the base as the actual structure.
Unilock Models & Products We Service in La Verne
We work with the full Unilock lineup relevant to Inland Empire hardscape: Brussels Block, the tumbled concrete paver that’s the most common driveway and patio unit in La Verne; Beacon Hill Flagstone for a broader, more irregular surface character; Estate Wall segmental retaining systems for slope retention and planter walls; and the Copthorne and Olde Quarry paver series for projects that want a cut-stone look without importing stone. We use Unilock’s own paver, wall, and edge-restraint systems plus compatible polymeric sand and base aggregate rather than mismatched substitutes, because joint and base compatibility drives longevity. We keep common units and joint materials on hand for faster turnaround on La Verne repairs and similar Unilock repair in Claremont when needed.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in La Verne
Hardscape pricing in La Verne reflects what’s under the surface, not just the paver itself. Here’s what these scopes typically run when we quote them:
| Service | Typical Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Home Addition | $45,000 – $130,000 |
What drives the number is base excavation depth, slope correction, drainage, and whether the existing apron needs cutback or removal. A free estimate includes an on-site look at your subgrade and existing grade, so you’ll know what the job actually needs before we quote it. Call (877) 752-3154 to schedule that walk-through.
Serving La Verne, CA — Our Local Coverage Area
We’re based in the La Verne area and know this community well, and our service coverage extends to Unilock in Upland and surrounding foothill cities. Use the map below to see our full reach — if you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in La Verne
Yes, when the base and drainage are built for inland heat cycles and winter moisture. La Verne’s hot, dry summers followed by rain pull moisture through pavers, which is why we spend more time on base compaction and joint sand compatibility than on the paver itself. Unilock’s tumbled units handle the thermal cycling well; the base is what determines whether they stay flat. Call (877) 752-3154 and we’ll evaluate your site before you commit to a scope.
No. We’re an independent general contractor that specifies and installs Unilock products on their own merits, not as a manufacturer-authorized or sponsored dealer. That independence matters: if a different product suits a La Verne site better, we’ll tell you. We aren’t obligated to push one brand.
We use Unilock’s own paver, wall, and edge-restraint systems along with compatible polymeric sand and base aggregate. For repairs, including Unilock service in Montclair, we match existing units rather than forcing a visual mismatch. Aftermarket copies might look right in a catalog photo, but joint geometry and texture rarely match in the field.
Most residential paver driveways run five to seven working days from tear-out to final sanding, depending on base depth and whether we’re correcting existing grade or apron problems. Patios are usually three to five days. Weather, not schedule padding, is the main variable in the Pomona Valley’s early-morning pour windows, though we also handle Unilock in Pomona itself when projects call for it.
Expect a paver driveway in La Verne to land between $7,000 and $18,000, with patios running $3,500 to $11,000. La Verne’s older ranch and downtown lots tend to need more base and subgrade correction than newer-tract cities, which pushes the low end up. Call (877) 752-3154 for an exact quote based on your site, not a generic per-square-foot number.
Service Areas Near La Verne
We serve La Verne and the surrounding inland cities, including Moreno Valley, Loma Linda, Grand Terrace, Highgrove, and Mead Valley. For Unilock work in Orange County, see Unilock service in Lake Forest or Unilock service in Yorba Linda.
Book Your Unilock Service in La Verne Today
If you’re planning a paver driveway, patio, or retaining wall in La Verne, call (877) 752-3154 to schedule your free estimate. We’ll walk the site, check your subgrade and drainage, and give you a written line-item quote that covers what the job actually requires.
Written by Noel Trevino, Owner & General Contractor at Moreno Valley Builders, serving La Verne and the Inland Empire.