Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Construction in Felton, CA | Moreno Valley Builders
We install and service Tremron pavers and retaining-wall systems across Felton, and the one thing that separates our work here from a standard hardscape job is this: nearly every Tremron project in this town has to answer to Cal Fire defensible-space and WUI hardening rules before it answers to aesthetics. That means base prep, drainage, and edge restraint aren’t finishing touches in Felton, they’re the job. We’re an independent Tremron installer, not manufacturer-affiliated or authorized, sourcing the brand’s products directly and building to Santa Cruz Mountains conditions, and we also provide Tremron service in Ben Lomond. Call (877) 752-3154 for a free estimate on your Felton project.
Why Felton Residents Choose Us for Tremron Service
Noel Trevino grew up in the Sunnymead Ranch area of Moreno Valley and has spent the better part of three decades building and renovating homes across the Inland Empire. That’s not a random credential. It means he’s seen what happens when a paver base is under-compacted, when a retaining wall gets built without geogrid, when a contractor counts on sunny weather that never comes. Felton doesn’t forgive those shortcuts either, especially not on hillside lots.
We specify Tremron because the product line holds up where cheaper pavers don’t, but the product is only half the equation. The other half is knowing how to set it in this soil, on these grades, under these trees. We’ve laid Tremron sales & service work across Felton’s steep, wooded lots long enough to know exactly how each series behaves under hillside drainage, tree-root heave, and wildfire-hardening requirements. Independent means we work for you, not for a manufacturer’s sales target. Your project, your material choices.
Styles & brands we work with







Common Tremron Construction Problems We Solve in Felton
- Hillside saturation and settling. Tremron pavers set on a steep Felton lot without a proper base and edge restraint heave and settle after Santa Cruz Mountains winter storms, opening joints and leaving ruts. We lift, re-base, and re-lay with drainage corrections that hold.
- Redwood and Douglas fir root intrusion. Roots lift and shift Tremron driveway and patio fields, breaking the sand setting bed and tipping units. On tree-dense Felton lots, this isn’t a one-time fix. It’s a design requirement, and we build for it.
- Retaining-wall bulge or lean. Tremron segmental block walls built without geogrid or proper drainage backfill bulge or topple on slope-failure-prone Felton grades after heavy rain. We rebuild with reinforced grid and clean drainage stone behind the wall.
- Ember and ash exposure. Felton’s WUI hardening expectations push owners to replace wood decks with hardscape. Thin-set or sand-set Tremron installations done without ignition-resistant detailing and clean base prep don’t hold up, so we don’t build them that way.
- Storm-damage rebuilds. After a big winter storm, the calls around Felton are the same: a downed fir through a deck or roof, a hillside starting to slump. The fix usually has to satisfy both storm-damage repair and fire-safe rebuild standards at once, and we handle both scopes under one roof.
Tremron Service in Felton: What Local Conditions Mean for Your Equipment
Here’s the detail nobody outside the San Lorenzo Valley thinks about. Felton’s WUI and Cal Fire defensible-space rules mean a Tremron paver patio or driveway often doubles as a fire-hardened non-combustible zone around the house, replacing the wood decking so common on these redwood-era cabins. That makes base prep, edge restraint, and drainage detail as much a fire-safety requirement here as a hardscape one.
On a steep, tree-dense lot off Highway 9, a winter storm dropped a fir across a deck and the hillside behind it started to slump. We pulled the failed wood deck, re-graded and built a terraced Tremron Olde Towne paver patio on a compacted base with edge restraint, and tied in a Tremron segmental block retaining wall with geogrid and drainage behind it. The owner got a stable slope and an ignition-resistant hardscape that satisfied both storm-repair and fire-safe rebuild standards. That’s not a hypothetical. That’s the job in Felton.
If the details aren’t right on paper, they won’t be right in the wall. Or the base. Or the slope.
Tremron Models & Products We Service in Felton
We work with the full Tremron lineup that makes sense for mountain lots. Olde Towne pavers, with their tumbled, rustic edge, handle driveways and patios on hillside sites where a crisp modern paver would look wrong against a redwood cabin. Mega-Olde Towne and Mega Olde Towne 75mm pavers carry vehicle loads on driveways where standard units would crack. River Block and Coventry retaining-wall blocks handle slope stabilization and terraced planting beds. Clay Brick, Sandstone, and Travertine pavers work for fire-hardened patios and walkways.
We spec genuine Tremron units and matching Tremron retaining-wall components so courses, textures, and colors stay consistent across a repair or a full rebuild, never mismatched aftermarket lookalikes. When a base or wall has failed but the units are still sound, we honest-pitch a lift-and-relay with new base and drainage rather than a full tear-out. That’s cheaper for you and wastes nothing.
See the difference
Before
After
Before
After
Before
AfterTremron Service Pricing in Felton
Paver and retaining-wall pricing in Felton runs on the same factors everywhere: access, grade, base depth, drainage, and how much the existing surface has failed. Our Tremron service in Mount Hermon follows the same pricing approach. Steep lots and narrow mountain roads add mobilization and hand-carry time, but the ranges below are what we typically quote for Tremron work across the 95018 ZIP.
| Service | Typical Range |
|---|---|
| Paver Patio Installation (Tremron) | $3,500 – $11,000 |
| Paver Driveway Installation (Tremron) | $7,000 – $18,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Home Addition | $45,000 – $130,000 |
A free estimate includes a site visit, a look at your existing base and drainage, and a written line-item quote. No vague allowances, no change-order surprises. Call (877) 752-3154 to get your Felton Tremron project priced.
Serving Felton, CA — Our Local Coverage Area
We’re based in the Felton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Tremron Construction in Felton
Yes, a properly installed Tremron paver patio can serve as part of your home’s non-combustible zone, replacing wood decking that Cal Fire defensible-space rules discourage in WUI areas. The key is base prep and edge restraint done to ignition-resistant standards, not just any sand-set job. Call (877) 752-3154 and we’ll walk your specific property.
Most settlement comes from an under-compacted base, missing edge restraint, or water running under the paver field from uphill. Felton’s heavy winter rain and clay-heavy hillside soils make drainage correction the single biggest factor in whether a paver job survives its first season. We fix the drainage, then fix the pavers.
Yes, but only with geogrid reinforcement and a proper drainage backfill. A stacked block wall without those fails on Felton grades, often within a year. We rebuild failed segmental walls with grid, drainage stone, and the right Tremron block for the height and load. Call (877) 752-3154 for an evaluation.
They’re one of the best options for Felton’s older cabins. Tremron pavers give you a non-combustible surface that meets WUI hardening expectations better than wood decking, and they handle the wet-dry cycle of the Santa Cruz Mountains without rotting. We’ll build it so water sheds, not pools.
Yes. We source genuine Tremron units in the same series, texture, and color family as your existing paver field, so a repair on a narrow Felton driveway doesn’t look like a patch job. If the old pavers are still sound, we can often lift, re-base, and relay them instead of replacing. Call (877) 752-3154 for an exact quote.
Service Areas Near Felton
We work throughout the Santa Cruz Mountains and beyond. Beyond Felton’s 95018 ZIP, common service areas include Scotts Valley, Ben Lomond, Boulder Creek, and Lompico. For our larger brand coverage, see Felton service area details on the main city page.
For Tremron work on other sides of the state, we also cover Tremron service in Brea and Tremron service in Aliso Viejo.
Book Your Tremron Service in Felton Today
Ready to replace that failing wood deck with a fire-hardened Tremron patio, or finally fix the paver driveway that’s been rutting since last winter? We offer Tremron service in Lompico too. Call (877) 752-3154 to schedule your free estimate. We’ll come out, look at your grade, your drainage, your existing base, and give you a straight answer with a written price.
Written by Noel Trevino, Owner & General Contractor at Moreno Valley Builders, serving Felton and the Santa Cruz Mountains.