Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Construction in Lexington Hills, CA | Moreno Valley Builders
We provide independent Tremron construction service across Lexington Hills, CA – paver driveways, patios, retaining walls, and walkways specified, installed, and repaired by a licensed general contractor. What sets our Tremron work here apart is simple: we read the installation specs against actual hillside grades and Santa Cruz County fire-hardening rules, not flat-subdivision assumptions. Call us at (877) 752-3154 for a free estimate on your Tremron project in Lexington Hills.
Why Lexington Hills Residents Choose Us for Tremron Service
We’ve laid, torn out, and rebuilt Tremron pavers across the Santa Cruz Mountains — including Los Gatos Tremron service — long enough to know which of their lines hold up on a slope and which ones creep. Noel Trevino, our owner and general contractor, grew up in the Sunnymead Ranch area of Moreno Valley and spent the better part of three decades building and renovating homes across the Inland Empire and mountain communities like this one. That hands-on background matters when a Tremron base is failing and the real problem is uphill runoff, not the paver itself.
We buy genuine Tremron units plus Tremron-compatible edge restraint and joint sand, so the field, the restraint, and the sand all come from one system. And because Lexington Hills sits high in the Santa Cruz Mountains with fog, heavy winter rain, and fire-season constraints, we stage materials and schedule work around what the roads and weather will actually allow. One contractor. Every phase.
Styles & brands we work with







Common Tremron Construction Problems We Solve in Lexington Hills
- Base saturation and “walking” joints on slopes. Lexington Hills gets real winter rain, and when Tremron pavers sit over under-compacted aggregate on a hillside, runoff concentrates and washes fines out of the base. The pavers start to drift, joints open, and the field ruts. We see this on rebuilds from the CZU-era and older hardscape, where the original base was skimped.
- Edge restraint failure on steep driveways. Without embedded edge restraint pinned into the grade, Tremron fields creep downhill here. It’s not a cosmetic problem – once the edge breaks, silt and water get under the paver face and the whole section begins to move.
- Joint-sand washout and moss. Marine-fog wet seasons and uphill runoff flush polymeric sand out of Tremron Plaza and Cambridge Cobble fields faster on a graded Lexington Hills site than on a flat suburban pad. Moss follows moisture, and the joints go green and slick.
- Deck-and-paver interface rot at fire-hardened rebuilds. Many Tremron patios in Lexington Hills sit tight against homes rebuilt under Chapter 7A ignition-resistant rules. If grade and slope-to-drain weren’t re-detailed at the wall line, moisture traps at the sill and wicks into framing above.
- Access-driven base failures. When a delivery truck can’t climb a steep private drive, the wrong base strategy gets chosen – sometimes a thinner lift, sometimes hand-carried aggregate that never compacts right. We plan the staging first, then the base spec.
Tremron Service in Lexington Hills: What Local Conditions Mean for Your Equipment
Lexington Hills is unincorporated Santa Cruz County reached by narrow, winding private mountain roads, so whether a Tremron base-rock delivery or plate compactor can physically climb and turn at the site — similar to Tremron service in Monte Sereno — not the paver selection, often decides the schedule and the base strategy. We’ve staged aggregate at a lower paved turn off Bear Creek Road because the delivery truck couldn’t make the final grade, then moved material up in smaller loads. That changes how you sequence compaction and how you tie into an existing hardscape.
Because the area burned in the 1985 Lexington Fire and again in the 2020 CZU Lightning Complex, many Tremron patio and walkway jobs here sit against recently rebuilt, fire-hardened exteriors. Grade and slope-to-drain have to be re-detailed at the wall line, not just the paver field. On a rebuilt CZU-era property off a steep private drive in Lexington Hills, our crew pulled out a Tremron patio that had heaved because the original base was skimmed thin over a slope cut. We staged the aggregate at the nearest paved turn, then over-excavated, re-compacted with geotextile, and relayed Tremron Plaza units with pinned edge restraint, finishing grade so runoff sheds away from the new Chapter 7A siding instead of into it.
Noel puts it plainly: “If the details aren’t right on paper, they won’t be right in the wall.” Or under the pavers.
Tremron Models & Products We Service in Lexington Hills
We work with the full Tremron hardscape line relevant to mountain properties — from Tremron repair in Cambrian Park to these hills — including the Tremron Plaza series (a rectangular 3-piece modular paver that lays fast and looks clean on driveways), Tremron Renaissance (tumbled and antiqued, good for patios that should look settled), Tremron Cambridge Cobble (a classic cobble profile we often match on older Lexington Hills properties), and Tremron Country Manor retaining wall block (for slope cuts and grade changes).
When tying into existing Tremron hardscape, we match dye lot so the new section doesn’t read as a patch. On a sound Tremron field with a failed base, we lift, re-base, and relay the existing pavers. But if the block faces are spalled or worn thin from years of runoff, we’ll tell you replacement is the honest call. Your project. Your material choices. We also source Tremron sales & service guidance on spec-compliant bedding and joint materials for each product line.
See the difference
Before
After
Before
After
Before
AfterTremron Service Pricing in Lexington Hills
Pricing for Tremron work in Lexington Hills reflects access, base prep, and the scope of the field. Here are the ranges we quote from:
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
What drives cost in Lexington Hills: site access (whether we can get a compactor and materials to the grade), excavation depth, slope and drainage re-detailing, and fire-hardening interface work at the wall line. Our free estimate includes an on-site look at grade, access, and existing base conditions. Call (877) 752-3154 for an exact quote – estimates are free.
Serving Lexington Hills, CA — Our Local Coverage Area
We’re based in the Lexington Hills area and know this community well, and we also handle Tremron repair in Scotts Valley. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Tremron Construction in Lexington Hills
Sometimes no, and that changes the whole plan. Many Lexington Hills homes sit at the end of steep private drives where a full flatbed or mixer can’t turn. We’ll stage materials at the nearest paved pullout and move them in smaller loads, or specify a base strategy that works with compacted lifts brought in by the yard. Call (877) 752-3154 and we’ll assess your access before you commit to anything.
Yes, at the interface. The patio itself isn’t a Chapter 7A element, but how it meets the home’s ignition-resistant wall and the defensible space grading around it matters. We regrade and detail slope-to-drain at the wall line so water and ember-trapping debris don’t collect against the siding. The county and fire district will look at that connection.
In Lexington Hills, yes – this is unincorporated Santa Cruz County, and hardscape that changes grade, drainage, or driveway footprint typically needs county permitting and may trigger fire-district review for defensible-space clearance. We manage the permits so you don’t have to.
That’s base saturation and joint-sand washout, and on a Lexington Hills slope it’s usually driven by uphill runoff concentrating through the field. The fix is over-excavation, a geotextile separator, proper aggregate compaction, and re-sanding with a polymeric joint sand once drainage is corrected. Call (877) 752-3154 for a site read – this one’s structural, not cosmetic.
Yes. We match manufacturer and dye lot where possible, and age the new section in with the same joint treatment and finish. If an exact lot match isn’t available, we’ll tell you before we cut anything.
Service Areas Near Lexington Hills
From Lexington Hills, we serve the surrounding mountain and valley communities, including Moreno Valley, Loma Linda, Grand Terrace, Highgrove, and Mead Valley. For hardscape on the western slope, see Tremron service in Communications Hill. Up the San Lorenzo Valley, Tremron service in Lompico covers that end of the range. And our Lexington Hills service area page details the full footprint.
Book Your Tremron Service in Lexington Hills Today
We’re an independent Tremron contractor – no manufacturer authorization, no warranty endorsement – and our only stake is whether your paver field survives the next wet winter on that slope. Call (877) 752-3154 to schedule your free estimate, and we’ll send someone up the hill who knows exactly what to look for.
Written by Noel Trevino, Owner & General Contractor at Moreno Valley Builders, serving Lexington Hills and the Santa Cruz Mountains.