Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Moreno Valley Homeowners Choose ES Windows Construction
We provide ES Windows repair in Moreno Valley, including construction and replacement service for vinyl single-hungs, horizontal sliders, fixed picture units, and impact-rated doors that were installed in the 1980s through 2000s tract housing stock throughout the city. Our crews pull, re-flash, and reset ES Windows units every month, which means we know where these specific extrusions fail and how to fix them without selling you a window you don’t need. We’re not an ES Windows dealer or an authorized factory rep. We’re the crew that fixes what the original install got wrong.
Moreno Valley homes, especially the stucco Mediterranean-style tracts in Sunnymead Ranch, Towngate, and Hidden Springs, are reaching the age where ES Windows perimeter seals and dual-pane glass start showing their years. Clay soils, Santa Ana wind events, and regular 100°F summer days don’t cause window failure on their own, but they accelerate every weak point a sloppy original install left behind. If you’re chasing a leak, a fogged pane, a sticky slider, or a window that won’t lock square, call us at (877) 752-3154 and we’ll tell you what’s actually going on before you spend a dollar.
Why Trust Moreno Valley Builders for Your ES Windows Construction?
Noel Trevino, our owner and general contractor, grew up in Sunnymead Ranch and has spent the better part of three decades building and renovating homes across the Inland Empire. He picked up fundamentals in framing, concrete, and mechanical systems at Riverside City College, then spent years fixing what other crews got wrong: undersized headers, stucco over green framing, window openings shimmed with whatever was in the truck. That background matters when you’re dealing with ES Windows products, because most ES Windows failures we see in Moreno Valley aren’t manufacturing defects. They’re install defects that took fifteen or twenty years to show.
Our technicians work on ES Windows vinyl single-hungs, horizontal sliders, and sliding glass doors with the same diagnostic discipline we bring to a full remodel. We check the rough opening, not just the sash. We check the flashing lap, not just the caulk bead. We check the weep system, not just the glass. And we source OEM ES Windows sash, glass, and roller hardware wherever lead time allows, so the replacement parts match the profile and the thermal performance of the rest of the unit. As an independent ES Windows service provider, we’re not bound to one distributor or one parts channel. We’re bound to getting your window right.
Styles & brands we work with
Common ES Windows Construction Problems We Fix in Moreno Valley
- Wind-driven leaks at the nail fin on vinyl sliders. ES Windows sliding glass doors and horizontal sliders rely on a perimeter flange that gets flashed against the house wrap at install. When the original crew lapped the flashing wrong, or skipped it at the sill corners, monsoon-season rain finds its way behind the stucco and shows up as a wet baseboard or a damp carpet pad. We pull the trim, expose the fin, re-flash correctly, and reset the unit. The window itself is usually fine.
- Fogged dual-pane insulated glass on south and west exposures. Moreno Valley gets relentless afternoon sun, and seal failure in ES Windows insulated glass units shows up first on the sides of the house that catch the most of it. The desiccant inside the spacer saturates, the interior seal lets go, and condensation appears between the panes. We replace the IGU itself, not the whole window, as long as the vinyl frame and sash are sound.
- Rotted rough opening framing hidden behind stucco. We’ve pulled ES Windows units in Moreno Valley where the window looked fine from the interior, but the furring strips and sill plate behind the stucco had been quietly rotting for years. This is common in the 1980s to 1990s tracts where the original paper wasn’t lapped over the window flange. Once the glazing comes out, you see the real problem. We replace the framing, re-flash, and set the window back properly.
- Sticky tracks and dropped rollers on ES Windows sliding glass doors. Moreno Valley dust is hard on sliding door hardware. The rollers collect grit, the track wears, and eventually the door sags and drags. We replace rollers, re-square the panel, and adjust the track height so the door locks without lifting. If the screen track is bent or the original screen frame is warped, we’ll build a retrofit that actually fits the opening.
- Failed perimeter seals on fixed picture windows. ES Windows fixed units get caulked and left alone, which means the perimeter sealant eventually shrinks, cracks, and pulls away from the stucco. That’s a slow leak that rots the sill over two or three wet seasons. We cut out the old sealant, re-bed the perimeter with a urethane that can handle the temperature swings we get here, and re-trim the interior if water staining has already bled through.
ES Windows Parts & Our Repair-vs-Replace Approach
We source OEM ES Windows sash, glass, and roller hardware when lead time allows, and use matching-spec aftermarket insulated glass units and weatherstripping when a unit is out of production or the factory lead time would leave a Moreno Valley family with a tarp on the window for six weeks. The honest answer is that some repair parts are generic by design: weatherstripping is weatherstripping if the profile matches. Glass is glass if the low-E coating and spacer match. Hardware is different. ES Windows roller assemblies and lock mechanisms have specific geometries, and the wrong substitute causes binding or a failed lock. We won’t put the wrong part in just because it’s on the shelf.
Our repair-versus-replace rule is simple. If the vinyl extrusion itself is cracked, warped, or the opening is so out of square that a new sash can’t seal, we recommend replacement. If the frame is sound and the rough opening is true, we repair and re-seal. That philosophy keeps a lot of ES Windows units in service for another decade instead of sending them to a landfill. Call (877) 752-3154 and we’ll tell you which side of the line your window falls on.
Our ES Windows Service Process – Step by Step
- 1
Diagnosis. We start with the symptom: where the water shows up, when the fog appears, what the lock does, how the door moves. Then we pull the interior trim or the glazing bead as needed to look at the rough opening, the flashing, the weep system, and the sash condition. ES Windows failures are usually visible once you look at the whole assembly, not just the glass.
- 2
Repair or install. If the window is repairable, we order or stock the correct ES Windows part, replace the failed IGU or hardware, re-flash the perimeter, and re-seal. If replacement is the right call, we pull the old unit, correct any framing or flashing deficiencies in the opening, and set the new ES Windows product with fresh sealant and proper shim placement.
- 3
Test. Before we close up the trim or stucco, we water-test the opening, check the lock throw, and run the sash or door through its full travel a few times. On sliders we check both rollers and the track height. On fixed units we check the perimeter seal with a moisture meter at the sill corners.
- 4
Warranty and punch list. Every ES Windows service we perform in Moreno Valley carries our workmanship warranty, and we document the parts and installation so you have a record. If there’s stucco patching, drywall repair, or trim work from water damage, we handle that under the same scope so you’re not juggling a window crew and a drywall crew.
See the difference
Before
After
Before
After
Before
AfterES Windows Products We Service & Install in Moreno Valley
We work on the full range of ES Windows vinyl products common in Moreno Valley homes: single-hung replacement windows, horizontal sliders, fixed and picture units, and sliding glass doors, including impact-rated vinyl windows and doors where code or homeowner insurance calls for them. That includes retrofit and new-construction flange units, and the older aluminum-clad vinyl hybrids we still find in some 1980s tracts in nearby ES Windows repair in March Air Force Base service area as well. That includes retrofit and new-construction flange units, and the older aluminum-clad vinyl hybrids we still find in some 1980s tracts. We keep a rotating local stock of common ES Windows glass sizes, roller assemblies, lock mechanisms, and weatherstripping profiles so turnaround on straightforward repairs doesn’t take two weeks. If the part in your window is out of production, we can usually match it within a few days through our supplier network.
We Also Service These Brands
ES Windows is one line we know well, but we’re a full-scope Moreno Valley general contractor. We also install and service KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler plumbing fixtures, which means when a window leak has damaged your kitchen or bath, we can repair the window and the room in one scope. One contractor. Every phase.
FAQs – ES Windows Construction Service in Moreno Valley
Yes, in most cases. Fogged glass means the IGU seal has failed, not necessarily the frame. We remove the sash or stop, swap in a new insulated glass unit matched to the original low-E coating and spacer width, and re-install. If the vinyl extrusion is cracked or the sash is warped, replacement becomes the better call. Call (877) 752-3154 and we’ll confirm which situation you have.
Because wind-driven rain is finding a path around the frame, not through the glass. On ES Windows sliders in Moreno Valley, the usual culprit is the original flashing at the nail fin: lapped wrong, missing at the sill corners, or degraded after twenty years behind stucco. The fix is to pull the trim, re-flash the perimeter properly, and reset the unit. Replacing the glass won’t stop the leak.
It depends on the install method. Retrofit replacements that leave the original frame in place usually don’t disturb stucco. Full-frame replacements where we pull the old ES Windows flange out often require cutting back stucco at the perimeter, which we patch and match to the wall texture. We’ll tell you before we start which method your windows need and what the stucco scope will look like.
Yes. We install ES Windows impact-rated vinyl windows and doors for Moreno Valley homeowners who want the added protection, whether it’s for insurance requirements, earthquake-triggered glass break concerns, or simply because a south-facing wall has taken enough Santa Ana punishment over the years. These units carry a heavier frame, laminated glass, and stronger hardware, and we set them to the manufacturer’s installation spec so the rating holds.
Sometimes, and this is where Moreno Valley’s aging tile roofs come in. Water that gets under a failing roof underlayment above the window can travel down the wall and show up at the window sill, looking exactly like a window leak. We always check for signs of a roof-to-wall leak before we tear into the window, because fixing the window won’t stop water that’s coming from above it. If the roof is the source, we handle that too, including tile roof repair in Colton ES Windows service areas and throughout Moreno Valley.
Window replacement in Moreno Valley typically runs $4,500 to $15,000 depending on window count, size, and whether full-frame or retrofit. Impact window installation runs $8,000 to $25,000 for the larger laminated-glass units. Roof repair, when a leak above the window is the real problem, runs $400 to $1,800. Here’s the breakdown:
| Service | Typical Price Range in Moreno Valley |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Repair | $400 – $1,800 |
Call (877) 752-3154 for an exact quote on your ES Windows project. Estimates are free, and we’ll give you a written line-item price before any work starts.
Book Your ES Windows Service in Moreno Valley, CA
If you’re dealing with a leaking slider, a fogged picture window, or a door that won’t lock, call us at (877) 752-3154 to schedule your free ES Windows service estimate in Moreno Valley. We’ll diagnose the real problem, give you an honest repair-or-replace answer, and stand behind the work. From permits to punch list.
Written by Noel Trevino, Owner at Moreno Valley Builders, serving ES Windows service in Woodcrest, Moreno Valley, and the Inland Empire.