Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Construction in San Martin, CA | Moreno Valley Builders
We provide independent Dvele construction service across San Martin, from new panelized ADUs to structural repairs on existing Dvele homes. Call (877) 752-3154 for a free estimate. What sets our Dvele work apart here is simple: we understand how a factory-sealed envelope behaves once it sits on San Martin’s expansive clay and has to tie into well-and-septic systems instead of city utilities.
Moreno Valley Builders has finished, tied in, and troubleshot Dvele panelized shells on Santa Clara County rural parcels for years. We’re an independent builder, not a Dvele dealer and not manufacturer-affiliated. But our crew knows their cassette and module systems well enough to spot a problem before it becomes a structural issue. If you’re planning a Dvele addition, ADU, or need service on an existing Dvele home in San Martin, we’re the crew that knows both the brand and the dirt under it. See our Dvele sales & service overview for the full scope of what we handle.
Why San Martin Residents Choose Us for Dvele Service
Most contractors in Santa Clara County have never opened a Dvele panel. They’ll treat a factory-sealed wall cassette like stick framing, cut a hole for a utility line, and walk away. We won’t do that to your home. We know how Dvele’s continuous weather barrier works, where the factory flashing ends, and why cutting into a panel without re-sealing the envelope is a slow leak waiting for winter frost to find it.
Noel Trevino, our owner and General Contractor in San Martin, grew up in Sunnymead Ranch and has spent the better part of three decades building and renovating homes across the Inland Empire. He picked up framing, concrete, and mechanical systems at Riverside City College, and he’s been the contractor neighbors call when a project has gone sideways. On a Dvele job, that experience translates into something specific: he reads the panel shop drawings the way a framer reads a cut list, and he catches misalignments before they get buried in drywall. If the details aren’t right on paper, they won’t be right in the wall.
We work throughout San Martin service area, from parcels along San Martin Avenue to the older ranch lots off Foothill. San Martin’s unincorporated status means county permits, agricultural zoning review, and well-and-septic clearances on nearly every addition or ADU. We’ve run that gauntlet enough times to know what the county wants before you file.
Styles & brands we work with
Common Dvele Construction Problems We Solve in San Martin
- Panel-to-slab joint separation. Expansive clay in parts of the San Martin valley moves with the seasons. A Dvele cassette set on a standard stem wall can lift and settle enough to open the joint between factory wall panels and the slab. Doors and windows rack before you see anything in the finish. We catch it early, shim, and re-anchor.
- Seam weeping at module-to-module joints. San Martin’s hot, dry summers bake the factory sealant, then winter frost cycles flex the joints. When a local roofer re-roofs a Dvele shell without re-integrating the continuous weather barrier, those panel seams become the first place water gets in.
- Roof-module flashing failures at low-slope transitions. This one shows up when a roofer nails new tile or metal over Dvele’s factory flashing instead of detailing it back into the panel system. It works for a season, then the first real rain finds the gap.
- Utility penetrations that compromise the envelope. Dvele panels are factory-sealed for a reason. When well pressure lines or septic stubs get cut through a panelized exterior wall without the proper sealing, the envelope stops being continuous. We fix this the right way: Dvele-spec sealants and flashing profiles, not a tube of caulk.
- Out-of-square openings on rural parcels. Lots with expansive soils shift enough over a few years to throw factory-square window and door openings out of true. The racking shows up as sticky doors and windows that won’t latch, even when the walls look fine.
Dvele Service in San Martin: What Local Conditions Mean for Your Home
San Martin sits in Santa Clara County’s wine-and-agricultural corridor, and because it’s unincorporated, every Dvele addition or ADU here pulls permits through Santa Clara County, not a city hall. That’s not a formality. Rural parcels route through agricultural and rural-residential zoning review plus well and septic clearances before a panel order can be released. A contractor used to working in Morgan Hill or Gilroy can get sideways on this fast; we already know the county’s expectations for septic tank setbacks, well pressure-line routing, and agricultural buffer requirements. On a former-orchard parcel off San Martin Avenue, a Dvele homeowner wanted a kitchen-and-bath expansion, and our crew had to clear Santa Clara County well and septic sign-offs before we could open the Dvele envelope for the new panel tie-in. Once approved, we re-flashed the roof-module transition and re-sealed the cassette-to-slab joint, which had begun to gap as the valley clay moved. The doors swung free again after we shimmed and re-anchored.
Dvele Models & Products We Service in San Martin
We work on the full Dvele range: the DveleCore panelized wall and floor cassette system, Dvele single-family modular home packages (the Core series), Dvele prefab ADU packages, and the high-performance envelope assemblies with factory-sealed walls and roof modules. Our parts approach is direct: we use Dvele’s own replacement panel components, sealants, and flashing profiles where factory spec matters, and proven third-party hardware where it doesn’t. We won’t void an envelope to save a few dollars. We stock common Dvele-spec sealants and flashing profiles locally so San Martin jobs don’t wait on a factory shipment for routine repairs. Our honest stance on repair versus replace: seal and re-flash a sound Dvele panel, and only swap modules when the cassette or slab interface is genuinely compromised.
See the difference
Before
After
Before
After
Before
AfterDvele Service Pricing in San Martin
What drives cost on a Dvele job is scope and what we find when we open things up. A seam re-flash is a day. A full kitchen remodel inside a Dvele shell runs the same range as any high-spec remodel, but the panel integration adds a layer most contractors don’t bid. Here’s what to expect for the common scopes we handle:
| Service | Price Range |
|---|---|
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Bathroom Remodel | $9,000 – $28,000 |
Every estimate is free and includes a written, line-item quote. No change orders invented mid-project. Call (877) 752-3154 to schedule yours.
Serving San Martin, CA — Our Local Coverage Area
We’re based in the San Martin area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dvele Construction in San Martin
County permit. San Martin is unincorporated, so every Dvele addition or ADU pulls permits through Santa Clara County, not a city hall. You’ll also need agricultural and rural-residential zoning review plus well and septic clearances before most panel orders can be released. We handle that paperwork as part of the job. Call (877) 752-3154 if you want us to check your parcel’s status.
Expansive clay under the slab is almost always the culprit. San Martin valley soils move with moisture, and that movement racks factory-square openings out of true. The fix is shimming and re-anchoring the affected cassettes, not planing the doors. We see this on Dvele homes throughout San Martin and nearby Dvele in Corralitos, especially on parcels that were once orchard land.
Yes. That’s one of our core jobs here. The work runs through several steps: county permit approval, well and septic clearance, envelope tie-in, roof-module transition re-flashing, and re-sealing the cassette-to-slab joint. We’ve done it off San Martin Avenue on former orchard parcels, so the process is familiar. To get an exact quote, call (877) 752-3154.
Most of the time, we can re-flash and re-seal the seam without replacing the module. Replacement only makes sense when the panel or the slab interface is genuinely compromised. Our default is to save the module and fix the flashing. Every inspection starts with a free assessment, so call (877) 752-3154 to get eyes on it.
Hot, dry summers mean we schedule roof and envelope work for the cooler morning window when we can, and we avoid opening the envelope during winter’s wet frost cycles. Expansive clay soils also settle more during dry spells, so we time slab-adjacent work when the ground is stable. Realistic scheduling beats a rushed seal job every time.
Service Areas Near San Martin
We serve San Martin and the surrounding communities. If you’re in Dvele service in Freedom, Dvele service in Amesti, or nearby Morgan Hill and Gilroy, we can reach your project. Our crews work throughout the southern Santa Clara County corridor, so Dvele service in San Martin usually means a short drive for us.
Book Your Dvele Service in San Martin Today
Need a Dvele addition, ADU, or repair on your San Martin property? Call (877) 752-3154 to schedule a free estimate. We’ll walk the site, check the panels, and give you a written line-item quote before any work starts.
Written by Noel Trevino, Owner at Moreno Valley Builders, serving San Martin and Santa Clara County since day one.