KraftMaid Construction in Colton, CA

KraftMaid Construction in Colton, CA | Moreno Valley Builders

We provide independent KraftMaid cabinet installation, repair, and refacing across Colton, CA. Most KraftMaid work we do here starts with one of two phone calls: either a homeowner wants a new KraftMaid kitchen in an older Colton home, or they’ve got failing doors, sagging shelves, or a rotted sink base and need to know if it’s worth fixing. What sets our work apart in Colton is that we understand this city’s older housing stock, from 1920s bungalows to 1970s tracts, and how that affects cabinet installation in ways a newer subdivision never sees. Call (877) 752-3154 for a free KraftMaid service estimate in Colton.

Call (877) 752-3154

Why Colton Residents Choose Us for KraftMaid Service

Noel Trevino, our owner and general contractor, grew up in the Sunnymead Ranch area of Moreno Valley and has spent nearly three decades building and renovating homes across the Inland Empire. He learned framing, concrete, and mechanical systems at Riverside City College, and he’s been tearing out other contractors’ mistakes in Colton kitchens long enough to know exactly what goes wrong behind a cabinet face. “If the details aren’t right on paper, they won’t be right in the wall,” he says, and that’s the standard we bring to every KraftMaid job.

We’ve installed and serviced KraftMaid cabinetry across hundreds of Inland Empire homes, so we know where the line’s all-plywood boxes and soft-close hardware hold up and where they don’t under real kitchen use. As an independent builder, we source KraftMaid product and stand behind our own installation and finish work. We are not authorized, sponsored, or warranty-endorsed by the manufacturer, which means we tell you straight what’s fixable and what’s not. For Colton, that honesty matters: our local KraftMaid sales & service team has seen enough pre-war kitchens to know when a box is worth saving and when it’s time for full replacement.

We’re also a full-scope general contractor, not a cabinet-only sub. That means when your Colton kitchen needs a load-bearing wall removed, a cast-iron drain replaced, or new electrical run for under-cabinet lighting, we handle it under the same roof. One contractor. Every phase.

Common KraftMaid Construction Problems We Solve in Colton

• Painted and thermofoil doors blistering or peeling at the bottom rail. Colton’s summer temperatures routinely pass 100°F, and older kitchens here often lack proper ventilation. Sink-base moisture and humidity swings attack the finish at the bottom rail first. We see this constantly on early-2000s KraftMaid doors in Colton.
• Particleboard-core shelf and drawer bottoms sagging under cast-iron cookware. KraftMaid’s standard lines use particleboard cores on some components. In pre-war Colton kitchens with no ventilation hood upgrade, heat and weight combine to warp shelves and drawer bottoms. We replace them with plywood cores during repair and refacing work.
• Soft-close hinges and undermount drawer glides failing after Inland Empire dust and heat cycling. Colton sits in a dry, dusty climate with intense UV exposure. Fine dust works its way into hinge mechanisms and drawer glides, accelerating wear. We stock OEM KraftMaid hinges and glides for quick Colton turnaround, and we use quality aftermarket hardware from Blum and Grass where the original is discontinued.
• Sink-base cabinetry rotting from below. Older Colton homes built from the 1920s through the 1970s often still have original galvanized or cast-iron drain connections that weep slowly. No moisture barrier was ever installed under the sink base. By the time a homeowner notices, the box and sometimes the subfloor are already compromised.
• Doors hanging and drawers dragging after years of heat cycling. The adhesive in older KraftMaid door joints can fail under repeated thermal stress. Doors start to rack, hinges pull loose, and drawer fronts separate. This is repairable in most cases, but only if the carcass itself is still sound.

KraftMaid Service in Colton: What Local Conditions Mean for Your Cabinetry

Colton’s construction market was shaped by its role as a blue-collar logistics hub. Rail yards and warehouses drove housing demand for generations, and the result is a city full of older, modest single-story tract and bungalow homes built between the 1920s and 1970s. These houses sit on pier-and-beam or raised foundations, often with original galvanized plumbing, shallow lot setbacks, and kitchens that were built small and closed-off by design. For KraftMaid work, that means most jobs in Colton involve reworking load-bearing walls and cramped galley layouts rather than dropping new boxes into an open-plan footprint. That’s the opposite of what we see in newer master-planned subdivisions in neighboring cities, where our Highgrove KraftMaid service mostly swaps cabinets in already-open kitchens. Here along Colton’s older residential streets off Mount Vernon Avenue, we’re usually opening a wall, relocating plumbing, or sistering floor joists before the first cabinet box goes in. If the details aren’t right on paper, they won’t be right in the wall.

KraftMaid Models & Products We Service in Colton

We install and service the full KraftMaid line, including the Vantage series (all-plywood, semi-custom door-and-drawer boxes), Momentum (the quick-ship semi-custom line with pre-assembled boxes), and Passage series (entry-level stained and painted finishes). We also work with the standard maple, oak, and painted MDF door styles common in 1990s-era kitchen updates, which Colton has plenty of. For repair work, we use OEM KraftMaid hinges, glides, and touch-up finishes for warranty-eligible parts, and we switch to quality aftermarket hardware like Blum and Grass where the original is discontinued or the customer wants a functional upgrade. We repair boxes and reface when carcasses are sound, and we only recommend full replacement when water damage or sagging shelves make the box itself unserviceable.

KraftMaid Service Pricing in Colton

FAQs – KraftMaid Construction in Colton

Can you match KraftMaid cabinets in a 1950s Colton galley kitchen where the walls aren’t plumb? Yes. We shim, scribe, and custom-fit every cabinet run to the actual wall, not the plan. In Colton’s older homes, walls drift out of plumb over decades, and standard KraftMaid boxes need field adjustment to sit flush and level. We handle that as standard practice, not an upsell.

My KraftMaid cabinet doors are peeling at the bottom – is that repairable or do I need new cabinets? In most Colton cases, repairable. If the door core is still sound, we strip and refinish or replace the door fronts with new KraftMaid doors and match the finish. If the boxes themselves are water-damaged or the door joints have fully separated from heat cycling, replacement makes more sense. We’ll tell you which one you’re looking at for free.

Do KraftMaid cabinets hold up in Colton’s 100°F+ summers? They do, with caveats. The all-plywood Vantage line holds up best under repeated heat cycling. Passage and standard MDF door styles need good ventilation and occasional hinge adjustment in Colton’s hot, dry climate. We recommend sealed seams and proper hood ventilation on every install here. Call (877) 752-3154 if you’re seeing heat-related wear.

How long does a KraftMaid kitchen cabinet install take in an older Colton home? A straight cabinet swap runs three to five working days. If we’re opening walls, relocating plumbing, or repairing subfloor, expect one to three weeks depending on scope. Colton’s galley kitchens often involve structural work, so we map the full timeline during the estimate.

Do you handle the countertop and backsplash along with KraftMaid cabinet installation? Yes. We install countertops and backsplash as part of the same project, with material options from Cambria and Caesarstone quartz to tile and stone. Your project, your material choices. One contractor, every phase.

Service Areas Near Colton

We serve Colton and the surrounding Inland Empire communities, including Moreno Valley, Loma Linda, Grand Terrace, Highgrove, and the March Air Force Base area. We also do KraftMaid service in Nuevo and KraftMaid service in Mentone. Our full Colton service area covers ZIP code 92324 and beyond.

Book Your KraftMaid Service in Colton Today

If your KraftMaid cabinets are failing or you’re ready to rework a cramped Colton kitchen, call (877) 752-3154 and we’ll set up a free on-site estimate. We’ll walk the kitchen, check the boxes, check the walls, and tell you exactly what the job needs.

Written by Noel Trevino, Owner & General Contractor at Moreno Valley Builders, serving Colton, KraftMaid in Grand Terrace, and the Inland Empire.