Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Construction in Stanton, CA | Moreno Valley Builders
We install, repair, and reface KraftMaid cabinetry across Stanton, and we’ve done so for over a decade as an independent contractor, not a manufacturer affiliate. What sets our KraftMaid work apart in Stanton is simple: we know how these cabinets hold up in 1950s and 60s tract homes with original plumbing, slab foundations, and tight lot access. If you’re looking for someone who understands both the brand and this city’s specific housing stock, call us at (877) 752-3154 for a free estimate.
Why Stanton Residents Choose Us for KraftMaid Service
Noel Trevino, our owner and general contractor, grew up in Sunnymead Ranch and spent the better part of three decades building and renovating homes across the Inland Empire and Orange County. He learned construction technology at Riverside City College, where hands-on coursework in framing, concrete, and mechanical systems gave him a foundation that held up better than a lot of what he later had to tear out and redo. That background matters when a 1962 Stanton kitchen has KraftMaid cabinets sitting on a slab that’s shifted, or when drawer glides from the 90s are shot and the homeowner wants to know whether to repair or replace. We’re independent, so we give honest repair-vs-replace advice. No one at a corporate call center is going to tell you to save the cabinet boxes and spend your money on new glides instead of a full rip-out. We will, if that’s what makes sense.
We also know what parts to use. OEM KraftMaid hinges, glides, and touch-up kits go in whenever they’re available. When a part’s been discontinued, we reach for aftermarket equivalents that meet or exceed the original specs. That’s a distinction most general contractors in Stanton won’t bother making. We make it because it changes the outcome.
Styles & brands we work with
Common KraftMaid Construction Problems We Solve in Stanton
- Hairline cracks in painted door panels. Stanton’s summers run hot and dry, and winter nights can dip. KraftMaid painted finishes, especially lighter colors, expand and contract at the panel joints. Over enough seasons, you’ll see hairline cracks along the door frame. We sand, seal, and refinish in place when the door is structurally sound, and replace only the doors when it isn’t.
- Sagging drawers from worn nylon rollers. Original KraftMaid drawer glides from the 1990s used nylon rollers that disintegrate with age. We see this constantly in Stanton kitchens that haven’t been updated since the house was built. Drawers stick, sag, and scrape. We replace the glides with OEM or better aftermarket units and the difference is immediate.
- Swollen particleboard under the sink. Early KraftMaid Vantage lines used particleboard core boxes that swell when wet. In Stanton’s older homes, the original plumbing is sixty-plus years old. Small under-sink leaks go unnoticed for months, and by the time you see it, the box has ballooned. We cut out the damaged section and rebuild the sink base, or replace the cabinet entirely if the damage spread to the face frame.
- Peeling thermofoil doors. KraftMaid thermofoil styles from the early 2000s peel along the edges, and Stanton’s temperature swings from hot afternoons to cool nights speed that up. The foil lifts, the door looks ragged, and no amount of glue holds it long term. We reface those doors with painted or wood styles, or replace the doors if you want to keep the existing boxes.
- Misaligned doors from slab movement. Stanton sits on clay-heavy soils that move with moisture. A slab shifts a quarter inch and suddenly every upper cabinet door is off by a sixteenth. We realign hinges, shim boxes, and in some cases rehang uppers so the reveal is consistent again. It’s fussy work, but it’s the difference between a kitchen that looks correct and one that looks tired.
KraftMaid Service in Stanton: What Local Conditions Mean for Your Equipment
Stanton is a dense, fully built-out 3.1-square-mile city with almost no undeveloped land left. Construction here is overwhelmingly tear-downs, room additions, ADU conversions, and rebuilds on small post-war lots rather than new subdivisions. Most homes are 1950s-1960s single-story stucco tract houses with detached garages and compact yards. For KraftMaid cabinet work, that means something very specific: access. On lots around the core of Stanton, contractors routinely plan construction access down narrow shared driveways and alleys. Full-size delivery trucks won’t always clear a fence line or a tight turn off a one-car garage. We stage materials in smaller loads and often hand-carry cabinet boxes through side yards. That’s not a line item on a bid; it’s just how the work gets done here. Any contractor who shows up in Stanton with a full semi and expects to park out front is about to waste your afternoon.
The housing stock also shapes the work itself. Original mid-century framing means walls aren’t always square. Floors have decades of settle. We plan cabinet installation around those realities instead of pretending everything’s plumb. That planning starts on paper, because, as Noel says, if the details aren’t right on paper, they won’t be right in the wall.
KraftMaid Models & Products We Service in Stanton
We work across the KraftMaid lines you’ll find in Stanton kitchens: KraftMaid Vantage, Deluxe, and Standard, plus select door styles from the broader KraftMaid Cabinetry collection like Fairmont and Providence. We’re equally comfortable installing a full new Vantage kitchen or adjusting hinges on a 25-year-old set of Deluxe doors.
Our approach to parts is straightforward. We source OEM KraftMaid replacement hinges, glides, and touch-up kits when the manufacturer still produces them. For obsolete parts, we use aftermarket equivalents that meet or exceed the original specs. We don’t put builder-grade hardware into cabinets that were designed for better. If a KraftMaid box is structurally sound, we repair. If water damage or multiple failures are stacking up, we’ll recommend replacement with a new KraftMaid line or a comparable brand, and we’ll tell you why one makes more sense than the other. For a deeper look at what we offer across the brand, see our KraftMaid sales & service page.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Service Pricing in Stanton
KraftMaid work in Stanton spans a real range, and the price depends on scope. A small cabinet installation runs on the low end; a full kitchen remodel with cabinets, countertops, and backsplash lands at the top. Here’s the breakdown:
| Service | Typical Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Kitchen Remodel | $14,000 – $45,000 |
What drives cost in Stanton is the same thing that drives cost everywhere: cabinet line, door style, finish, and how much prep the existing kitchen needs. A 1961 kitchen with a sagging floor and original plumbing costs more to prepare than a 1995 kitchen that’s square and dry. Our free estimate includes a written line-item quote so you know exactly what you’re paying for before we start. Call (877) 752-3154 to schedule one.
Serving Stanton, CA — Our Local Coverage Area
We’re based in the Stanton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – KraftMaid Construction in Stanton
Sometimes, but we won’t promise a perfect match. KraftMaid has retired door styles over the years, and finishes fade differently depending on light exposure and kitchen humidity. We can often source doors or door blanks in the same style family, then refinish to blend with your existing cabinets. If a true match isn’t possible, refacing all the doors in one style is the cleaner move. Call (877) 752-3154 and we’ll tell you honestly which direction makes sense for your kitchen.
It depends on how far the damage has spread. If the sink base is swollen but the face frame is intact and the cabinet box is still square, we can rebuild the damaged section and you keep your kitchen. If the damage reached the floor of the box or the adjoining cabinets, replacement is usually cheaper than nursing a losing battle. In Stanton’s older homes, under-sink leaks often run for months before anyone notices. We’ll open it up and show you what we’re seeing. Estimates are free.
They mean we plan for smaller truckloads and hand-carrying. Stanton’s post-war lots often have detached garages and narrow shared driveways that won’t fit a full delivery truck. We stage materials in local runs and move boxes through side yards and back doors. We’ve done it enough that it doesn’t slow the job down; it just changes the logistics. You won’t get a surprise delivery surcharge for it.
We do both. Refacing replaces doors, drawer fronts, and hardware while keeping the existing boxes. It’s a strong option when your KraftMaid cabinet boxes are structurally sound but the doors are dated or peeling. Full replacement makes sense when the boxes are water damaged, cracking, or just laid out poorly for how you use the kitchen now. We’ll walk you through the cost difference and what we’d do in your house. Call (877) 752-3154 for a free estimate.
Well-maintained KraftMaid cabinets can last 25 to 40 years in Stanton, but that depends on the line, the finish, and how dry the kitchen stays. Painted doors in direct sun exposure from a kitchen window will show hairline cracks sooner than wood-finished doors in a shaded room. Thermofoil from the 2000s tends to peel faster here because of the temperature swings. The biggest killer in Stanton is under-sink moisture from old plumbing, so checking for slow leaks once a year adds years to cabinet life.
Service Areas Near Stanton
We run KraftMaid service calls throughout Stanton and the surrounding Orange County and Inland Empire corridors. If you’re in Moreno Valley, March Air Force Base, Loma Linda, Highgrove, Mead Valley, or Grand Terrace, we cover those areas too. You can see the full footprint on our Stanton service area page. And if you’re out toward the desert, we also provide KraftMaid service in Cathedral City and KraftMaid service in Desert Edge.
A homeowner on Pine Circle in Stanton had a 1998 KraftMaid Vantage kitchen with drawers that stuck and doors that wouldn’t close. We replaced the worn nylon rollers with OEM glides, adjusted every hinge, and added a quartz countertop and tile backsplash to modernize the space. The fix kept the original cabinet boxes and saved the homeowner from a full remodel. That’s the kind of outcome we aim for in Stanton: respect the original build when it’s solid, replace what’s genuinely done, and tell you the difference straight.
Book Your KraftMaid Service in Stanton Today
If your KraftMaid cabinets need repair, refacing, or a full replacement in Stanton, call us at (877) 752-3154. We’ll schedule a free estimate, walk the job with you, and give you a written line-item quote. One contractor, every phase, from permits to punch list. Call today.
Written by Noel Trevino, Owner & General Contractor at Moreno Valley Builders, serving Stanton and the surrounding Orange County and Inland Empire communities.