Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Construction in Felton, CA | Moreno Valley Builders
We provide independent KraftMaid cabinet installation, refacing, and full kitchen remodeling across Felton and KraftMaid service in Mount Hermon, and the one thing that separates our KraftMaid work here from anywhere else is what’s underneath the cabinets. Half the homes in Felton sit on non-engineered foundations on steep, wooded lots, so a “cabinet swap” almost always means leveling the floor system first. If the floor moves, the cabinet run racks, doors bind, and drawer glides fail, no matter how good the KraftMaid box is. Call (877) 752-3154 for a free estimate, and we’ll work with you on KraftMaid cabinetry that fits both your kitchen and your foundation.
Why Felton Residents Choose Us for KraftMaid Service
We’re a full-scope general contractor, not a cabinet-only shop, and that matters in Felton more than in flatland cities. Our crew installs and reconfigures KraftMaid cabinetry across the San Lorenzo Valley corridor, from KraftMaid service in Ben Lomond to full slab-door kitchens and single-vanity swaps, so we know how their box construction, drawer hardware, and finish options behave in real mountain homes. We are an independent builder, not a KraftMaid dealer or authorized representative, and we source and fit their product the same way we’d fit any premium semi-custom line: on the merits of the install, not a sales relationship.
Noel Trevino, our owner and general contractor, grew up in the Sunnymead Ranch area of Moreno Valley and has spent close to three decades building and renovating homes across the Inland Empire. He learned framing, concrete, and mechanical systems at Riverside City College, and he’s been the contractor neighbors call when a project has gone sideways. In Felton, that experience translates: he’s seen enough racked face frames and swollen particleboard boxes to know when a cabinet can be saved and when you’re throwing money at a lost cause.
We carry KraftMaid sales & service expertise that pairs their cabinet lines with the right underlayment, wall prep, and moisture control for mountain construction. You get one contractor managing the whole scope: cabinets, countertops, plumbing, electrical, and any structural work the job uncovers.
Styles & brands we work with
Common KraftMaid Construction Problems We Solve in Felton
- Door and drawer-face delamination on older oak Vantage fronts. Felton’s wet-winter/dry-summer humidity swing attacks unsealed mountain cabins hard. We’ve pulled 1990s KraftMaid Vantage raised-panel doors where the thin oak veneer lifts at the panel edges after years of seasonal expansion and contraction. The fix is either refinishing and resealing the sound doors or replacing fronts where the substrate has started to crumble.
- Particleboard or MDF box swelling along exterior walls. A cabinet run against an exterior wall in a Felton cabin takes on moisture when winter storms drive water behind redwood siding or a slow roof leak drips down the stud cavity. Drawer bottoms sag, the box loses square, and doors stop aligning. We replace the damaged boxes and address the water entry point, otherwise the new cabinets fail the same way.
- Face-frame racking on out-of-level floors. Mid-century cabins on non-engineered foundations settle unevenly. A KraftMaid run installed on a floor that’s an inch out of level will rack within a year. We measure the floor before any cabinet purchase happens and level or sister the framing as needed.
- Soft-close hinges and drawer glides stiffening after dry-season dust intrusion. Felton homes run wood heat and open windows through the summer and fall fire season. Fine dust and ash work into soft-close mechanisms, and hinges that were smooth in March bind by September. We clean and re-lubricate OEM hinges where they’re salvageable, and replace them with OEM or matched aftermarket hardware where they’re not.
- Out-of-square boxes from prior DIY or handyman installs. We see a lot of Felton kitchens where a previous owner set KraftMaid boxes on shims without checking diagonal square. The doors looked fine for six months, then gaps appeared. We pull the run, re-square, and reinstall, or replace boxes that warped beyond correction.
KraftMaid Service in Felton: What Local Conditions Mean for Your Cabinets
KraftMaid installs in Felton often can’t be a straight cabinet swap. Because so many of these cabins sit on non-engineered foundations on steep wooded lots, we routinely have to level and re-square a floor system before a new cabinet run will sit plumb, something a Santa Cruz or KraftMaid in Scotts Valley install rarely forces. Think about what that means for a kitchen remodel: the cabinet quote isn’t really just a cabinet quote. It’s a floor-leveling quote with cabinets on top. Homeowners who budget only for boxes and countertops get surprised when the first base cabinet rocks an eighth of an inch on the high corner and the countertop fabricator has to shim the slab. We flag it during the estimate, not after demo.
On a mid-century cabin off the San Lorenzo Valley corridor near KraftMaid service in Lompico, we pulled a wall of 1990s oak KraftMaid Vantage cabinets whose particleboard boxes had swollen against an exterior wall after a winter storm pushed water behind the redwood siding. Several drawer bottoms were sagging and the face frame had racked off the out-of-level floor. We sistered and leveled the subfloor, replaced the swollen run with new KraftMaid Momentum full-access boxes in a shaker front, reused the sound upper doors after refinishing, and set a quartz top. The homeowner got a square, fire-hardened kitchen instead of patching cabinets onto a moving floor. If the details aren’t right on paper, they won’t be right in the wall.
KraftMaid Models & Products We Service in Felton
We install and service KraftMaid Vantage, Momentum, and the Cabinetry Signature series, and we still work on standard oak raised-panel cabinetry from the 1990s and 2000s redwood-era remodels all over Felton. The approach to parts is simple: we fit OEM KraftMaid hinges, glides, and touch-up finish where the box and doors are sound, and we match quality aftermarket hardware and replacement fronts where an OEM part is discontinued or back-ordered. On older swollen or racked boxes, we’ll tell you honestly when refacing won’t hold and a full cabinet replacement is the cheaper long-run fix. We keep common hinge and glide sizes in stock for fast Felton turnaround, and we order door and panel replacements directly from current production lines.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Service Pricing in Felton
Cabinet pricing in Felton depends on four things: how many boxes you’re installing, whether the floor needs leveling first, the cabinet line and door style, and what countertop you’re pairing with it. Here’s where our recent Felton-area work has landed:
| Scope | Price Range |
|---|---|
| Full Kitchen Remodel | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
Every estimate is free and includes a written line-item breakdown. If we find a floor issue or water damage during the walkthrough, it goes in the quote at the same time, not as a change order later. Call (877) 752-3154 to schedule yours.
Serving Felton, CA — Our Local Coverage Area
We’re based in the Felton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – KraftMaid Construction in Felton
Yes, but the install usually requires floor leveling or wall straightening first, because Felton’s older cabins rarely have plumb or level surfaces. We measure before ordering, and we include any structural prep in the estimate so the cabinets sit square on day one. Call (877) 752-3154 for a site assessment.
Yes, we can match KraftMaid’s current oak door styles to most 1990s and 2000s Vantage-era kitchens. Finish matching on older exposed oak takes touch-up work, but the profile and construction are close enough that most additions read seamless. We’ll bring samples to your Felton home before you commit.
Yes, in a meaningful way. KraftMaid’s full-access and slab-door lines sit closer to the box with less exposed face frame, which leaves fewer dust and ember ledges, and their plywood-box Signature series holds up better to the seasonal moisture swings of WUI zone construction. We’ll spec the line that works with your overall hardening plan. Call (877) 752-3154 for a kitchen-by-kitchen recommendation.
If the box is square and the drawer sides are sound, replacement glides and a repaired drawer bottom usually solve it. If the box has swollen from winter moisture or the drawer opening is out of square, replacement is the honest call. We’ll give you that answer during a free inspection, with numbers for both paths.
Yes, and it’s one of the most common scopes we do in Felton’s compact mountain bathrooms. Small bathroom remodels here typically run $5,000 to $12,000, with a KraftMaid vanity installation from $800 to $3,000 depending on size and finish. Call (877) 752-3154 and we’ll measure the actual room, not guess from photos.
Service Areas Near Felton
Our service range around Felton covers Felton service area and the surrounding San Lorenzo Valley communities. We also work in KraftMaid service in Seven Trees and KraftMaid service in Lexington Hills, and we take projects in Moreno Valley, Loma Linda, and Grand Terrace for homeowners who split time between the mountains and the Inland Empire.
Book Your KraftMaid Service in Felton Today
If you’re planning a Felton kitchen with KraftMaid cabinets, call (877) 752-3154 and ask for a free estimate. We’ll walk the site, check the floors and walls, and give you a number you can actually build on. From permits to punch list, one contractor handles it.
Written by Noel Trevino, Owner & General Contractor at Moreno Valley Builders, serving Felton and the San Lorenzo Valley.