Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Construction in Crestline, CA | Moreno Valley Builders
Ameristar cabinetry and construction materials show up throughout Crestline’s older mountain cabins and post-fire rebuilds, and we service them independently across the 92325 zip code. The one thing that makes our Ameristar work here different: we check snowmelt intrusion and out-of-square pier-and-beam framing before a single new cabinet box goes in, because Crestline at 4,600 feet doesn’t play by valley rules. At Moreno Valley Builders, Noel Trevino and our crew handle Ameristar cabinet installation, refacing, full kitchen remodels, and roof repair tied to those cabinets. Call (877) 752-3154 to talk about what you’re seeing.
Why Crestline Residents Choose Us for Ameristar Service
We’ve spent years working on Ameristar cabinets, roofing assemblies, and exterior trim across the San Bernardino Mountains, including San Bernardino Ameristar service. That means we know exactly how this builder-grade product line behaves under Crestline snow loads, freeze-thaw cycles, and fire-hardened rebuild specs. We are an independent contractor, not authorized, sponsored, or warranty-backed by Ameristar, and we say so plainly. What we bring instead is hands-on familiarity with the Ameristar cabinet boxes common in 1980s through mid-2000s Crestline kitchens, including the ones that went in during Old Fire rebuilds. Noel Trevino grew up in Moreno Valley and has spent nearly three decades building and renovating across the Inland Empire, so when a Crestline homeowner describes a swollen toe kick or a drawer that won’t close after a heavy winter, he already knows what’s behind the drywall. If the details aren’t right on paper, they won’t be right in the wall.
Styles & brands we work with







Common Ameristar Construction Problems We Solve in Crestline
Here’s what we actually see in Crestline, service call after service call:
- Swollen or delaminating cabinet boxes and toe kicks. Snowmelt wicks in from under-built deck framing or failed door flashing on older cabins, sits against the Ameristar particleboard base, and the box swells. We see this much more in Crestline than anywhere down the hill because wet winter runoff against piers and ledgers is part of the local water table.
- Thermofoil and laminate door faces checked, peeled, or yellowed. Intense high-altitude UV through south-facing windows, at 4,600 feet with thin mountain air, breaks down Ameristar’s laminate finishes faster than valley homeowners would ever expect. The doors look five years older than the cabinets actually are.
- Soft MDF or particleboard cabinet bases after a roof or deck leak. A small roof leak above a Crestline kitchen can run down a wall, sit inside the cabinet base over a wet winter, and turn the substrate to sponge. We open these up and find the damage goes deeper than the homeowner thought.
- Hinges and drawer glides pulling out of thin stock side panels. When a heavy snow-load season racks the walls of a pier-and-beam cabin slightly out of square, Ameristar’s thin stock side panels flex, and the hardware pulls loose. The cabinet wasn’t built wrong; the structure moved around it.
- Post-fire rebuild Ameristar cabinets with improper blocking. Some mid-2000s Old Fire rebuilds in Crestline had cabinets installed quickly, without solid blocking behind the boxes, and we straighten those out now that walls have settled.
Each of these is fixable. We tell homeowners honestly whether refacing and re-boxing is the smarter spend versus a full replacement.
Ameristar Service in Crestline: What Local Conditions Mean for Your Equipment
Crestline’s 92325 sits at roughly 4,600 feet, and the older cabins here often still carry pier-and-beam framing with original redwood or cedar siding. So an Ameristar in Highland-style cabinet or trim job usually starts with checking for snowmelt intrusion and out-of-square walls before a single new box goes in. That’s a step flat-lot valley kitchens never need. Walk into a 1950s cabin off a forested lot near Lake Gregory, and you’re not just looking at cabinets. You’re looking at what decades of wet Sierra storms did to the ledger board behind them, where snowmelt ran in behind a bad deck, and whether the floor framing has sagged enough that a new cabinet run would need shims. We’ve opened kitchen walls in Crestline and found the original Ameristar boxes screwed to furring strips with swollen bases, sitting on framing that moved. In the valley, a cabinet installer sets boxes and goes home. Up here, the structure gets checked first because the structure is the variable. Here’s one from a 1950s cabin off a forested lot near Lake Gregory: our crew opened a kitchen to install new Ameristar cabinets and found the original Ameristar boxes screwed to furring strips with a soft, swollen toe kick from years of snowmelt running in behind a bad deck ledger. We re-flashed and re-framed the affected wall, re-shimmed the run to plumb, and set new Ameristar boxes with solid blocking so the doors and drawers closed true again.
Ameristar Models & Products We Service in Crestline
We work on Ameristar framed and frameless stock cabinet lines sold through building-supply channels, including the Ameristar by Kitchen Cabinet Depot and Ameristar Cabinetry lines that went into mid-2000s Crestline rebuilds after the Old Fire. That covers the Ameristar value-tier cabinet boxes common in 1980s through 2000s mountain-cabin kitchen refreshes. When a hinge or drawer glide is still available as an OEM match, we use it. When the OEM part is discontinued or the original was undersized for Crestline’s racking conditions, we switch to quality aftermarket hardware that holds better. We keep common Ameristar-compatible hinges, glides, and door fronts on hand for faster turnaround in Crestline, and for roof repair over kitchens, we specify GAF, CertainTeed, Owens Corning, IKO, Atlas, or Tamko depending on slope, snow load, and fire-resistant assembly requirements. Roof replacement over an Ameristar kitchen in Crestline runs $8,000 to $20,000 depending on tear-off, decking repair, and whether we’re adding ember-resistant ridge and eave detailing.
Ameristar Service Pricing in Crestline
What drives Ameristar-related cost in Crestline is almost always the condition of the wall behind the cabinets, not the cabinet boxes themselves. Here are our current market-calibrated ranges for the most common Ameristar scopes:
| Service | Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Roof Repair | $400 – $1,800 |
| Roof Replacement | $8,000 – $20,000 |
Your free estimate includes a look at the cabinet structure, the wall framing behind it, and any roof or deck condition that affects longevity. We write line-item quotes with fixed pricing, and we pull permits and pass inspections on full remodels. Call (877) 752-3154 to get a number that reflects what’s actually inside your walls.
Why do Ameristar cabinets in Crestline cabins swell at the toe kick more than valley homes?
Snowmelt is the difference. In Crestline, wet winter runoff collects against piers, ledgers, and door thresholds, and on older cabins with original pier-and-beam framing, that water wicks up and in behind the cabinet toe kick. Ameristar’s value-tier boxes use particleboard or MDF, which swells and delaminates fast once moisture sits against it for a season. Valley homes sit on slabs with no snowmelt and much lower wet-season saturation, so the same cabinet lasts longer. Call (877) 752-3154 and we’ll tell you whether you need a toe-kick replacement or something deeper.
See the difference
Before
After
Before
After
Before
AfterCan you just reface my existing Ameristar cabinets instead of replacing them?
Often, yes, and in Crestline it’s frequently the smarter spend. Refacing replaces doors and drawer fronts and applies a matching veneer to the boxes, and it costs substantially less than a full tear-out. But we only recommend refacing when the Ameristar boxes themselves are dry, square, and structurally sound. If snowmelt intrusion has swollen a base or a wall has racked out of square, refacing hides the problem rather than fixing it. We’ll open the toe kicks and check before we quote.
Does an Ameristar cabinet or kitchen install in Crestline need a permit?
Cabinet installation and refacing without moving plumbing, electrical, or walls typically does not require a permit in Crestline. As soon as we’re moving a sink, adding a circuit, altering a load-bearing wall, or pulling a roof assembly apart above the kitchen, we pull the required permits and coordinate the inspections. If your project touches a roof or deck ledger near the kitchen, we’ll check what Cal Fire defensible-space and snow load requirements apply to your lot. We manage the permits from start to final inspection.
My Ameristar cabinet doors peeled and yellowed – is that the brand or the altitude?
It’s both, honestly. Ameristar’s thermofoil and laminate doors use a finish rated for normal residential exposure, but Crestline sits at 4,600 feet, where high-altitude UV is significantly more intense through south-facing windows. That exposure is what checks, peels, and yellows the door faces years ahead of schedule. The brand’s finish isn’t defective for its intended use; the alpine sun just works it harder up here. New doors with a UV-stable finish, placed out of direct afternoon light or fitted with low-E window film, hold up much better. We can match replacement door fronts to your existing Ameristar boxes.
Can a new Ameristar kitchen go in a cabin with an under-built deck or porch roof above it?
Not safely, no, and we won’t install a kitchen we know will get wet. If the deck or porch roof above your Crestline kitchen wasn’t engineered for the local snow load, it’s a matter of when water finds the cabinets, not if. We’ll inspect the roof assembly and deck ledger before we touch a cabinet box. If it’s under-built, we re-engineer and re-flash that junction first, then set the new Ameristar boxes against a wall that will actually stay dry. That’s how we keep a new kitchen from becoming a recurring repair bill.
Service Areas Near Crestline
Our Crestline service area runs through the mountain communities and down the hill. We also serve Moreno Valley, March Air Force Base, Loma Linda, Highgrove, Mead Valley, and Grand Terrace. If you’re in Crestline or anywhere nearby in the San Bernardino Mountains, we’ll come look. For Ameristar work specifically, see our Ameristar service in Lake Arrowhead and Ameristar service in Lakeland Village pages. And for the full picture of how we work, visit Ameristar sales & service. We’re one contractor, every phase, from permits to punch list.
Serving Crestline, CA — Our Local Coverage Area
We’re based in the Crestline area and know this community well, and we also provide General Contractor – Crestline services. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
Book Your Ameristar Service in Crestline Today
If you’re in Crestline and need Ameristar cabinets repaired, refaced, or installed, or a roof repair over an existing Ameristar kitchen, call (877) 752-3154 to schedule your free estimate. We’ll walk your kitchen, check the structure, and give you a written, line-item number. For urgent snow or leak damage affecting cabinets, call us directly and we’ll get someone up to the property as soon as conditions allow.
Written by Noel Trevino, Owner at Moreno Valley Builders, serving Crestline, Ameristar service in Muscoy, and the San Bernardino Mountains.