Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Bonny Doon, CA | Moreno Valley Builders
We provide independent CGI cabinet installation, refacing, and countertop service throughout Bonny Doon, ZIP 95060. What makes our CGI work different here is that we plan every project around access limits, sloped foundation movement, and Santa Cruz County’s wildland-urban interface fire codes before the first cabinet box gets ordered. We’re a full-scope general contractor, not a CGI factory rep, which means we’ll tell you straight when a CGI box is worth saving or when the house itself needs attention first. For a free estimate on CGI cabinetry, countertops, or a full kitchen scope, call (877) 752-3154.
Why Bonny Doon Residents Choose Us for CGI Service
Plenty of contractors can hang a cabinet. Far fewer have spent years installing and retrofitting independent CGI cabinetry and surface products on the steep, wooded, fire-code-heavy lots that define the Santa Cruz Mountains. We know how these boxes and finishes actually behave in Bonny Doon’s climate rather than in a showroom. Noel Trevino grew up in Moreno Valley and spent nearly three decades building and renovating homes, much of it fixing work that failed because someone ignored what the structure was doing underneath the finish. He applies the same eye to Bonny Doon, where a pier-and-beam floor moving with seasonal moisture will tell you more about cabinet alignment than any hinge spec sheet. We call this CGI sales & service work for what it is: real, site-sensitive carpentry on houses that demand more than a flat-floor install. One contractor. Every phase.
Styles & brands we work with
Common CGI Construction Problems We Solve in Bonny Doon
Here’s what we see repeatedly in Bonny Doon homes, and why it happens here more than most places:
- Racked frameless boxes on pier-and-beam homes. Bonny Doon’s older redwood-era cabins and 1970s – 90s contemporary builds often sit on pier-and-beam foundations. As the floor structure moves with wet winters and dry summers, frameless CGI cabinet boxes telegraph that movement. Doors and drawers rack out of alignment, not because the hinges failed, but because the cabinet shifted with the house. We shim, re-level, and re-hang so the faces sit square again.
- Swollen toe kicks and sink bases from fog and leaks. Heavy winter rainfall and frequent fog drive indoor humidity up in these older cabins. Particleboard-core or MDF-door CGI units absorb that moisture at the lowest points: the toe kick and the sink base. We see these swell and soften long before the wall cabinets ever show a problem. Replacement with all-plywood CGI boxes solves the recurrence.
- Soft-close hardware losing dampening after heavy pantry use. Households off narrow private roads tend to stock bulk goods. That means overloaded drawers and hundreds of cycles a month. Lighter-duty CGI soft-close glides and hinges lose dampening or crack at the mounting screws after a few seasons of that. We swap in matched aftermarket glides with better load ratings when OEM parts are discontinued or overpriced.
- Delaminated thermofoil and laminate doors on south-facing walls. Intense summer sun through unshaded mountain windows hits south-facing kitchen walls hard. CGI thermofoil and laminate door finishes can delaminate or blister under that exposure. We rarely see this on shaded flatland lots. Replacing with painted or wood-veneer door fronts eliminates the failure mode.
- Countertop seams opening due to structural settling. Quartz and granite tops installed on a house with active pier settling will eventually show it at the seam. A countertop doesn’t flex; it gaps. In Bonny Doon, before we set new CGI quartz or granite, we check what the subfloor and joists are doing. If the structure needs leveling, the new top goes in after.
CGI Service in Bonny Doon: What Local Conditions Mean for Your Equipment
There’s a local dynamic in Bonny Doon that changes how a simple cabinet job plays out, and it’s one a flatland kitchen never faces. Santa Cruz County’s wildland-urban interface fire code pushes most rebuilds and major remodels toward Class A roofing and ember-resistant venting. Those same code packages frequently trigger a kitchen or bath scope review. So a CGI cabinet install here can get pulled into a broader fire-hardening inspection that looks at venting, siding, deck attachments, and defensible space before the county signs off. That means the smart move is to coordinate your CGI cabinet or countertop scope with whatever exterior and structural work the fire code review flags. We manage those trades so you don’t have to. On a rebuild off Pine Flat Road, our crew opened a kitchen where the homeowner wanted to keep the CGI frameless boxes but the pier-and-beam subfloor had cupped after two wet winters, so every door was dragging. We re-leveled and shimmed the base, replaced the swollen sink cabinet and toe kick with new CGI boxes, and swapped in fresh soft-close glides. The counters went back down flat and the doors have stayed aligned through the following rainy season.
CGI Models & Products We Service in Bonny Doon
We work with the CGI lines homeowners in this area actually have: the Ready-to-Assemble all-plywood cabinet lines used in budget kitchen refreshes, the Euro-style frameless cabinetry with full-extension soft-close hardware common in newer remodels, and the cabinet refacing door and drawer-front programs that make sense for older redwood-era kitchens worth preserving. We also install CGI quartz and granite countertop surfacing sold alongside their cabinet packages. We source genuine CGI replacement doors, drawer fronts, and hardware where the line is still supported, and we match quality aftermarket soft-close glides and hinges when OEM parts are discontinued or overpriced. We’ll tell you honestly when refacing and re-hinging a sound CGI box is the smarter spend versus a full tear-out. Your project. Your material choices.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Bonny Doon
| Scope | Typical Range in Bonny Doon |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Roof Replacement | $8,000 – $20,000 |
| Metal Roof Installation | $15,000 – $40,000 |
What drives the cost in Bonny Doon is access, structure, and code review. A tight driveway off Empire Grade adds delivery and hauling time. A pier-and-beam floor that needs leveling before cabinets go in adds labor. A fire-code review that pulls in a roofing or venting scope changes the total. Our free estimate is a written line-item quote, so you see exactly where the money goes. Call (877) 752-3154 for an exact quote on your scope.
Serving Bonny Doon, CA — Our Local Coverage Area
We’re based in the Bonny Doon area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Bonny Doon
Yes. We plan Bonny Doon deliveries around what the road actually allows, which often means a box truck that stops short and a smaller rig or material-handling approach for the last stretch. We’ve done it on Pine Flat Road and off Empire Grade. Call (877) 752-3154 and we’ll walk the access before we quote, so the price includes the real logistics.
It can. Santa Cruz County’s wildland-urban interface code means a major kitchen remodel or rebuild often pulls in a scope review for Class A roofing, ember-resistant vents, and defensible space. We manage those CGI in Ben Lomond trades under one roof, so you’re not juggling a fire-hardening contractor alongside your cabinet installer. We manage the trades so you don’t have to.
In Bonny Doon, it’s usually the house. Pier-and-beam foundations move with seasonal moisture, and frameless CGI in Mount Hermon boxes will rack with that movement. We inspect the floor structure before we touch a hinge, because shimming a cabinet on a moving floor is wasted effort. Call (877) 752-3154 for a site visit and we’ll tell you which one is at fault.
We replace doors, drawer fronts, and glides when the cabinet boxes are sound, and we’ll tell you plainly when a full tear-out is the only honest fix. Refacing a plywood CGI repair in Felton box with fresh doors and hardware often costs less than half of new cabinets and buys another ten years. Our estimate shows both numbers, so the choice is yours.
Moisture affects the substrate and the structure under the stone more than the CGI quartz or granite itself. We check the cabinet tops and floor level before setting, and we seal seams and backsplashes for the humidity swings these homes see every winter. Call (877) 752-3154 for a free estimate on CGI in Pasatiempo countertops, and we’ll factor your site’s specific exposure into the scope.
Service Areas Near Bonny Doon
Beyond Bonny Doon, our crews cover the broader Santa Cruz Mountains and the Bay Area foothills. You’ll find us working in Moreno Valley, March Air Force Base, Loma Linda, Highgrove, Mead Valley, and Grand Terrace. For CGI work in neighboring areas, see CGI service in Los Gatos and CGI service in Alum Rock. Our Bonny Doon service area page covers access, ZIP codes, and what we handle across 95060.
Book Your CGI Service in Bonny Doon Today
Call (877) 752-3154 to schedule a free written estimate for CGI cabinets, countertops, refacing, or a full kitchen remodel in Bonny Doon. We’ll walk your site, check the structure and access, and give you a line-item quote with no change orders later. From permits to punch list.
Written by Noel Trevino, Owner & General Contractor at Moreno Valley Builders, serving Bonny Doon and the Santa Cruz Mountains.