Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in La Selva Beach, CA | Moreno Valley Builders
CGI cabinetry in La Selva Beach fails in predictable ways: thermofoil peels from marine-layer humidity, hinges corrode in salt air, and boxes rack out of square on old beach-cottage floors. We’re Moreno Valley Builders, an independent CGI service provider, and we work on these cabinets every week across the 95003 ZIP. If your CGI door fronts are delaminating or your drawers grind when you pull them, call (877) 752-3154 and we’ll tell you whether it’s worth repairing or replacing. One La Selva Beach General Contractor handles the whole scope, from the cabinet boxes to the drainage detail behind the wall.
Why La Selva Beach Residents Choose Us for CGI Service
We’ve spent years retrofitting CGI cabinetry in Santa Cruz County homes that have already been through decades of salt air and marine-layer exposure. That’s the difference. A cabinet crew from inland can install a box. We know how CGI thermofoil behaves when fog sits on it for eight months a year, and we know which aftermarket slides and hinges hold up on a bluff-side kitchen. Noel Trevino, our owner and general contractor, grew up in Sunnymead Ranch and has spent close to three decades building and renovating homes. He’ll tell you the same thing he tells every La Selva Beach client: if the details aren’t right on paper, they won’t be right in the wall. We bring that same material-savvy lens to every CGI sales & service call, whether it’s a full kitchen remodel or refacing a single cabinet run.
Styles & brands we work with
Common CGI Construction Problems We Solve in La Selva Beach
Here’s what we actually see when we open up a cabinet in a La Selva Beach home, not what a catalog says should happen:
- Thermofoil and laminate delamination. Marine-layer humidity and salt air get behind the film on CGI door fronts, especially lower cabinets and island bases. The edges lift, then the peel spreads across the panel. It’s cosmetic at first, but once moisture gets into the MDF core, the door front swells and can’t be saved.
- Frameless boxes racked out of square. Beach cottages from the 1950s and 60s sit on floors that sag. When a floor settles under a CGI frameless cabinet run, the box torques, the doors drift, and the gaps go uneven. Shimming and re-leveling is usually the fix, not replacing the boxes.
- Corroded hardware. Steel hinges, slides, and leveling legs seize fast in this salt air. Doors stop latching cleanly, and drawer runners grind long before the cabinet boxes themselves fail. The boxes are fine. The hardware is done.
- Swollen painted MDF end panels. A slow leak or a coastal storm pushes moisture behind the wall or under the sink. Painted MDF soaks it up and blisters. By the time you see it on the face, the panel has usually had water behind it for months.
- Drainage problems behind the run. On bluff-side streets like Sand Dollar Drive, runoff finds its way downhill and behind a lower cabinet run. The damage shows up first as a musty smell or a swollen corner of the end panel. Fixing the cabinet without fixing the drainage means fixing it twice.
CGI Service in La Selva Beach: What Local Conditions Mean for Your Equipment
La Selva Beach is a small unincorporated coastal community where nearly all construction has to navigate Coastal Commission permits on top of county building review. That changes the order of a cabinet job here in a way inland contractors never see. We sequence CGI cabinet orders and install dates around a permit timeline that may take weeks, not days. A homeowner who wants our Home Remodeling in La Selva Beach with new CGI cabinets off Sand Dollar Drive is likely looking at coastal development review before a single box gets ordered. So we order what we can early, stage the boxes in a dry space, and time the install for after the permit clears. The error inland crews make is treating this like any other kitchen. Here, you need a contractor who knows that a cabinet run can’t go in before the drainage detail on the downhill wall is settled, because in a La Selva Beach bluff-side home the water will find the cabinet before the inspector finds anything. That’s the kind of thing we plan for from the first walkthrough, not something we discover mid-project.
CGI Models & Products We Service in La Selva Beach
We work on the full CGI lineup: Ready-to-Assemble all-plywood cabinet boxes, Euro-style frameless boxes, Shaker and flat-slab door and drawer fronts in painted MDF and thermofoil, and plywood drawer boxes with full-extension slides. Our parts approach is honest and specific. We don’t chase same-vintage OEM hinges or slides, especially for a coastal home where the original hardware was underspecified for salt air. We replace worn slides, hinges, and leveling legs with aftermarket hardware rated for coastal humidity, and we keep the boxes and door fronts that are still sound. On a partial remodel, we repair and reface. Full replacement only comes when the panel has swollen or the box has racked past what shimming can fix. That’s a repair-first posture, not a parts-pusher’s pitch.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in La Selva Beach
Here’s what CGI-related work typically runs in La Selva Beach. These are project ranges, not per-box quotes. The Coastal Commission permit path, bluff-side site access, and drainage work can push a job toward the upper end of a range. A standard kitchen on a flat lot with no coastal review sits lower. Here are the numbers we work from:
| Scope of Work | Typical Range |
|---|---|
| Full Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Full Bathroom Remodel | $9,000 – $28,000 |
Every estimate is free. We show up, measure, check the floor, check the drainage, and give you a written line-item quote. Call (877) 752-3154 to schedule one.
Serving La Selva Beach, CA — Our Local Coverage Area
We’re based in the La Selva Beach area and know this community well, including CGI repair in Aptos Hills-Larkin Valley. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in La Selva Beach
Often, yes. Because La Selva Beach is unincorporated Santa Cruz County with a Coastal Commission permit zone, a kitchen remodel with structural changes frequently triggers coastal development review on top of the county building permit. A simple cabinet swap usually doesn’t. We verify the permit path before we order anything. Call (877) 752-3154 and we’ll tell you where your project falls.
Marine-layer humidity and salt air get behind the thermofoil film, usually at the edges, and the adhesive fails. It happens fastest on lower cabinets and island bases, where the air is coolest and dampest. We see it on homes within walking distance of the bluff, and we see it less on inland hillside streets. The boxes usually survive. The thermofoil door fronts rarely do.
Yes. When the boxes are solid and square, we repair the hardware, reface the door and drawer fronts, and the result is a kitchen that looks new without a full cabinet replacement. The threshold is when a panel has absorbed water and swollen, or the box has racked past what shimming can correct. Then replacement is the honest call. We’ll show you the difference before you spend a dime. Free estimate at (877) 752-3154.
It corrodes steel hinges, slides, and leveling legs fast, especially in kitchens that face the water. Doors stop latching and drawers stick. The cabinet boxes can be in fine shape while the hardware fails. We replace corroded hardware with coastal-rated aftermarket hinges and slides, which last longer than the original steel in this air.
Check the floor for level. Check the drainage along the exterior wall, especially on a hillside or bluff-side lot. Check the existing hardware. In a mid-century La Selva Beach cottage, the floor has likely settled, and the old cabinet run may have racked with it. We level and shim before we set a single box. Skip that step and the new cabinets will drift out of alignment within a few seasons. We’ll assess all of it during a free estimate.
Service Areas Near La Selva Beach
We serve the whole Santa Cruz County coast, not just La Selva Beach. Our crews work through La Selva Beach service area and east through the coastal communities. If you’re a few minutes north in CGI service in Rio Del Mar or up in CGI service in Aptos, the same crew and the same coastal-materials approach apply. Salt air doesn’t stop at the city line.
Book Your CGI Service in La Selva Beach Today
Whether it’s a full kitchen remodel with CGI cabinetry, a reface of a tired bath vanity, or a repair call on a cabinet run that’s seen better days, the first step is a free estimate. Call (877) 752-3154 and ask for Noel’s team. We’ll walk the site, check the floor, and tell you exactly what it needs.
Written by Noel Trevino, Owner & General Contractor at Moreno Valley Builders, serving La Selva Beach and Santa Cruz County.