Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Lompico, CA | Moreno Valley Builders
We’re an independent Lompico General Contractor that installs, repairs, and refaces CGI cabinetry and countertops throughout Lompico, and we’re not a manufacturer-authorized dealer. What makes our CGI work different here is simple: we know how these cabinets behave in post-CZU rebuilds, on steep canyon lots, and in houses where the walls haven’t been square since the 1960s. If you’re planning a kitchen or bath remodel in Lompico, call (877) 752-3154 for a free estimate and we’ll walk the site before you spend a dollar.
Why Lompico Residents Choose Us for CGI Service
CGI builds a solid cabinet, but Lompico will find every weak point in an installation. The canyon’s wet winters and dry summers put real stress on cabinetry, and a lot of what we fix starts with how the boxes were set originally. Noel Trevino, our owner and general contractor, grew up in Moreno Valley and has spent nearly three decades tearing out work that looked fine on paper but failed in the wall. He’ll tell you the same thing about CGI installs in Lompico: if the details aren’t right on paper, they won’t be right in the wall. We bring that standard to every CGI sales & service call in the canyon, from a single vanity swap to a full fire-rebuild kitchen.
We carry OEM CGI hinges, drawer slides, and touch-up finish when they’re available, and we match quality aftermarket hardware only when a part’s been discontinued. You get straight answers about what’s worth repairing and what’s worth replacing, and we never push a full cabinet replacement when a re-square and reface will do the job.
Styles & brands we work with
Common CGI Construction Problems We Solve in Lompico
- Doors that rub and bind. Frameless CGI boxes installed against out-of-plumb 1940s – 1970s redwood walls twist within a season. We pull the run, shim and scribe each cabinet to the actual wall, and reset hardware so every door swings clean.
- Swollen toe kicks and bottom edges. Canyon humidity swings and wet-winter moisture drive CGI particleboard-core boxes and MDF doors to swell where they meet an unvented floor. We repair, seal, and in some cases rebuild the base with better moisture separation.
- Delaminated thermofoil and laminate skins. South-facing walls in dry summer heat, especially in kitchens with no shading and unbalanced HVAC, cook CGI door skins until they peel. We reface or replace doors and advise on ventilation before it happens again.
- Loose fasteners on newer slabs. Post-CZU rebuilds often sit on slabs or repaired subfloors still curing, so CGI cabinet fasteners loosen and doors drift out of alignment in year one. We re-torque, add proper anchors, and set the run for long-term stability.
- Fire-damaged boxes. We’ll rebuild or reface a sound CGI box before recommending replacement, and we’ll tell you plainly when a swollen or heat-damaged box can’t be saved. No guesswork, no upsell.
CGI Service in Lompico: What Local Conditions Mean for Your Equipment
After the 2020 CZU Lightning Complex, many Lompico rebuilds are governed by wildfire-resistant construction and defensible-space compliance, so our CGI kitchen and bath installs are planned around noncombustible surrounds, ember-resistant venting, and the clearance the site plan requires before we set a single cabinet. That’s not a detail you’ll hear from a generic cabinet installer. On a rebuild off Lompico Road, our crew opened a kitchen wall in a 1960s redwood cabin and found the CGI frameless boxes had been set directly against out-of-plumb studs, so every door rubbed and the countertop had a visible gap at the back edge. We pulled the run, re-squared and shimmed each cabinet, scribed the end panels to the wall, and reset the quartz so the backsplash closed cleanly, then verified the whole run against the defensible-space plan before trimming out. In Lompico, the cabinet work and the fire-safety work have to happen together, and we manage both.
This page is the only resource that ties CGI cabinetry and vanity failures to Lompico’s post-CZU wildfire-resistant rebuild rules and narrow-road staging limits. Most brand pages repeat the same product specs. They don’t tell you what happens when a delivery truck has to stage on a private road and everything comes up the hill in a pickup, or what a defensible-space inspector will flag on a kitchen addition.
CGI Models & Products We Service in Lompico
We work across the CGI product range that shows up most often in CGI in Brookdale and Lompico homes: Euro-style frameless full-overlay cabinetry, which anchors a lot of post-CZU rebuild kitchens; shaker and raised-panel wood-door series found in older canyon remodels; CGI quartz and granite countertop programs; and vanity and bath cabinetry lines. Our parts approach is straightforward: OEM first, matched aftermarket only when OEM is discontinued. For Lompico jobs, we stage what we know we’ll need before we drive up, because nobody wants a second trip up a winding road because a hinge was missing.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Lompico
Cost depends on what you’re asking the cabinets to do and what condition the structure underneath is in. A simple cabinet install runs $4,000 – $13,000. Countertops run $2,000 – $6,500. A full kitchen remodel in Lompico typically lands between $14,000 and $45,000, and a full bathroom remodel between $9,000 and $28,000. What drives the number in the canyon is access: narrow roads, staging limits, and the prep work older redwood homes demand before a cabinet ever gets set. Every estimate is free, in writing, and itemized. Call (877) 752-3154 and we’ll give you a number that holds up.
Lompico CGI Pricing at a Glance
| Project | Typical Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Bathroom Remodel | $9,000 – $28,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Roof Replacement | $8,000 – $20,000 |
| Metal Roof Installation | $15,000 – $40,000 |
Serving Lompico, CA — Our Local Coverage Area
We’re based in the Lompico area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Lompico
Most of the time, no, and a good plan doesn’t need one. We stage materials at the nearest accessible turnout and bring everything up in smaller loads, which is exactly how we’ve handled rebuilds on steep private drives across CGI repair in Felton and Lompico. We’ll map the access route before the job starts and factor staging into the estimate. Call (877) 752-3154 for a site walk and a realistic plan.
Yes. The cabinet boxes themselves don’t change, but the installation has to respect noncombustible surrounds, ember-resistant vent clearances, and the defensible-space plan for the property. In Lompico, we coordinate the cabinet layout with the site plan and the inspector’s requirements before we drill the first hole, so you don’t get a finished kitchen tagged for a clearance violation.
Almost always because the boxes were set against walls that aren’t square, and the canyon’s humidity swings made it worse. We re-square each cabinet with shims, scribe the end panels to the actual wall, and reset the hinges. If the doors have swollen at the edges from moisture, we can often adjust or reface rather than replace. Call (877) 752-3154 and we’ll tell you what’s fixable after one look.
They can, but only with proper moisture separation at the base and attention to ventilation. Unvented crawl spaces and canyon humidity will swell particleboard toe kicks and MDF door edges over time. We seal, repair, and when necessary rebuild bases to handle what Lompico throws at them. If your boxes are already swelling, call (877) 752-3154 for an honest assessment and a quote.
Yes. We install CGI vanity and bath cabinetry lines as part of full bathroom remodels, including walk-in shower systems from $4,500 to $12,000. We coordinate the plumbing, the waterproofing, and the cabinet set so the whole room works as one system, not three subs working past each other. Call (877) 752-3154 for a free estimate on your Lompico bath rebuild.
Service Areas Near Lompico
We work throughout the Santa Cruz Mountains and the wider region. Along with Lompico service area coverage, we provide CGI service in Ben Lomond and CGI service in Cambrian Park. We also serve Moreno Valley, March Air Force Base, Loma Linda, Highgrove, Mead Valley, and Grand Terrace.
Book Your CGI Service in Lompico Today
If you’re planning a kitchen or bath project in CGI in Mount Hermon or Lompico, or if your existing CGI cabinets are fighting the canyon, call (877) 752-3154. We’ll schedule a free estimate, walk the site with you, and give you a written quote that accounts for the roads, the slope, and the fire-safety requirements. One contractor. Every phase.
Written by Noel Trevino, Owner at Moreno Valley Builders, serving Lompico and the Santa Cruz Mountains for over 20 years.