Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in Highland, CA | Moreno Valley Builders
We’re Moreno Valley Builders, an independent general contractor that installs, refaces, and repairs CWS cabinetry across Highland’s 92346 ZIP. We’re not authorized by or affiliated with CWS, and we say that straight out because homeowners deserve to know who they’re actually hiring. What makes our CWS work different here comes down to one local fact: Highland’s foothill clay soils move under these homes, and that movement shows up first in cabinet boxes and drawer alignment. If your CWS cabinets are racked, peeling, or sagging, call (877) 752-3154 for a free estimate.
Why Highland Residents Choose Us for CWS Service
Most contractors in Highland can hang a cabinet box. Very few can tell you why a CWS thermofoil door is peeling on the west wall but not the north, or why your drawer glides stripped out after fifteen years in a 1960s tract kitchen. We can, because we’ve spent years working on CWS Ready-to-Assemble base and wall lines, frameless pantry units, and garage storage systems in this exact housing stock. Noel Trevino, our owner and general contractor, grew up in Sunnymead Ranch and has spent roughly three decades fixing the mistakes other crews left behind across the Inland Empire, including CWS in San Bernardino. That background matters when you’re deciding between refacing a CWS box or replacing it entirely. We’ll give you a straight answer either way, not whatever answer lands the bigger invoice.
We also carry OEM-equivalent hardware from Blum and Richelieu, which matters when CWS-spec hinges are discontinued and you don’t want mismatched parts on your doors. Highland homeowners work with us because we know the product, we know the soils, and we manage the whole job under one roof. Learn more about our CWS sales & service work across the region.
Styles & brands we work with
Common CWS Construction Problems We Solve in Highland
Here’s what we actually see in Highland homes, week after week:
- Thermofoil and laminate peeling on sun-facing cabinets. Highland’s hot inland summers push west-facing wall surfaces well past 120 degrees, and CWS melamine and thermofoil finishes give up under that repeated stress. The peel usually starts at an edge or seam. We reface when the box is sound, and we’re honest when replacement is cheaper than repair.
- Hinge and drawer-glide failure from stripped particleboard screw holes. Older Highland tract homes from the 1950s through 1970s have kitchens that have been used hard for decades. Once the particleboard stops holding a screw, the hardware fails quickly. We swap in OEM-equivalent glides and hinges and rebuild the screw seats properly.
- Swelling and delamination at toe kicks and cabinet bottoms. Slab-on-grade homes are common in Highland’s flatter sections, and slab moisture wicks up into cabinet bases. We find CWS toe kicks that look fine from the outside but are swelling from behind. If the box has taken on water, we replace rather than patch, because patchwork fails again within a year or two.
- Racking and out-of-square boxes from foundation movement. This is the big one in Highland. When the clay under a hillside home off Boulder Avenue shifts with seasonal wetting and drying, cabinet boxes twist. Doors stop closing, drawers bind, and the whole run looks crooked. We re-shim, re-square, and tell you when the real fix is a pier-and-beam retrofit, not another cabinet adjustment.
- Moisture damage in bathroom vanities on slab foundations. Highland’s slab-on-grade bathrooms put CWS vanity boxes in direct contact with floor moisture and splash zones. The bottoms swell, the doors drag, and the melamine edge banding lifts. We address the source, not just the symptom.
If any of this sounds familiar, call us at (877) 752-3154. We’ll take a look and give you a real diagnosis.
CWS Service in Highland: What Local Conditions Mean for Your Equipment
Highland’s hillside lots off Boulder Avenue and around the base of the foothills sit on expansive clay that swells with winter moisture and shrinks through the hot dry summer. We have stood in kitchens where a CWS cabinet run was dead level in July and visibly racked by February. The homeowner didn’t do anything wrong. The soil moved, the slab or crawlspace framing flexed, and the cabinets absorbed the stress. Communities like CWS repair in Muscoy a few miles west rarely see this, which is exactly why a generic CWS service page won’t prepare you for it. Installations in these homes need careful shimming, oversized screw holes with proper fill, and a re-check after the first wet-dry cycle. One homeowner off Boulder Avenue called us after a wet winter because her CWS cabinet doors wouldn’t close. The clay under her addition had shifted and thrown the boxes out of square. We re-squared and re-shimmed the frames, replaced the stripped hinges with OEM-equivalent hardware, refaced the fronts, and told her honestly that a pier-and-beam retrofit was probably the long-term answer. Highland is a foothill city with foothill problems. If the details aren’t right on paper, they won’t be right in the wall.
CWS Models & Products We Service in Highland
We work on the full CWS cabinet and storage range: Ready-to-Assemble base and wall lines, frameless full-overlay pantry and storage units, melamine and thermofoil-finish cabinet lines, and CWS garage and utility storage systems. The older RTA pieces show up most often in Highland’s mid-century tract kitchens, usually original to a 1960s or 1970s remodel. The newer frameless units are more common in foothill customs. When a CWS-spec part is discontinued, we source OEM-equivalent hardware from Blum and Richelieu, and we keep the common hinge and glide sizes on hand for faster turnaround. You can view our full Highland service area coverage for details on where we work.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in Highland
What you’ll spend depends on whether we’re refacing, re-aligning, or replacing. Here are the price ranges we quote for CWS-related work in Highland:
| Scope | Typical Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Small Kitchen Remodel | $9,000 – $20,000 |
Refacing a peeling CWS run runs toward the lower end when the boxes are still square. A full replacement with new boxes, counters, and backsplash lands higher, especially in a WUI-zone foothill home where fire-rated materials change the spec. Every estimate is free and line-itemed, so you’ll see exactly where the money goes before you sign anything. Call (877) 752-3154 and we’ll walk you through it.
Serving Highland, CA — Our Local Coverage Area
We’re based in the Highland area and know this community well, and we also handle CWS service in Loma Linda. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CWS Construction in Highland
In Highland, it’s usually both. West-facing walls in summer push surface temperatures high enough to fatigue thermofoil adhesive, and a cabinet from the 1990s or 2000s is already at the end of its finish life. The combination is what causes the peel. Refacing fixes it when the substrate is solid; if the boxes are also swelling or racked, replacement makes more sense. Call (877) 752-3154 for an exact quote.
It can, but the install details matter. Slab moisture wicks into particleboard vanity bases over time, especially in older Highland tract bathrooms where the slab wasn’t sealed well. We specify sealed toe kicks, proper clearance, and moisture-resistant materials at the base so the new vanity isn’t repeating the same failure. We’ll check for standing moisture problems before we set anything.
Highland sits at the base of the San Bernardino Mountains, and much of the foothill housing falls inside wildland-urban interface code boundaries. A kitchen remodel in those zones can trigger requirements for ember-resistant vents, fire-rated wall assemblies, and specific exterior material choices – and those constraints can affect the budget and the sequence of the work. We pull the permits and coordinate the WUI compliance so you’re not in a code fight mid-project. Call us at (877) 752-3154 and we’ll review what applies to your address.
No. We’re an independent general contractor, not an authorized CWS dealer or service affiliate. That’s why you get straight repair-versus-replace advice, not a pitch for a specific product line. When CWS-spec parts are discontinued, we use OEM-equivalent hardware from Blum and Richelieu, and we tell you when that’s happening.
Simple hinge and glide replacements are usually done in one visit. Refacing a full kitchen runs several days depending on the scope, and a full replacement is typically a one- to two-week project once materials arrive. Highland jobs in WUI zones can add permit lead time. Call (877) 752-3154 and we’ll give you a realistic schedule for your specific job.
Service Areas Near Highland
Our crews work throughout Highland and the surrounding Inland Empire. We also cover Moreno Valley, Loma Linda, Grand Terrace, Highgrove, and the March Air Force Base area. If you’re farther south, see our CWS service in Romoland page, or check CWS service in Rialto if you’re northwest of Highland.
Book Your CWS Service in Highland Today
We’ll come out, look at your CWS cabinets, and tell you what’s actually going on with a free line-item estimate. Call (877) 752-3154 to schedule yours. We manage the trades so you don’t have to, and we’ll show up with the right parts for Highland’s climate and soil.
Written by Noel Trevino, Owner & General Contractor at Moreno Valley Builders, serving Highland since day one.