Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Construction in Claremont, CA | Moreno Valley Builders
We’re an independent general contractor that has set, sealed, and tied Dvele prefab wall panels, floor cassettes, and roof modules into additions and ADUs across Claremont, with Montclair Dvele service also available nearby. We are not authorized by Dvele and we don’t speak for them. What sets our Claremont work apart is this: we’ve adapted Dvele’s factory-tolerance panel systems to early-1900s Craftsman framing, historic-district review expectations, and Santa Ana wind-driven rain conditions that a generic Dvele installer in a newer subdivision never has to think about. Call (877) 752-3154 for a free estimate.
Why Claremont Residents Choose Us for Dvele Service
Dvele builds a tight panel system. The tolerances are factory-set, the engineering is real, and when the modules are set correctly they outperform a lot of site-built framing. But Claremont’s housing stock doesn’t care about factory tolerances. A 1912 Craftsman near the Village has settled, been remodeled twice, and carries framing that was cut by hand. That’s where our field experience with Dvele comes in. We know where the panel joints need to be re-sealed, where the roof module connectors need upgrading for wind uplift, and where the tie-in between a Dvele core and an older site-built addition is going to move as Claremont’s summer heat and dry cycles work on the interface.
Noel Trevino grew up in the Sunnymead Ranch area of Moreno Valley and has spent the better part of three decades building and renovating homes across the Inland Empire. He picked up construction fundamentals at Riverside City College, where hands-on framing and mechanical systems coursework gave him a foundation that held up better than a lot of what he later had to tear out and redo. As he puts it, “If the details aren’t right on paper, they won’t be right in the wall.” That’s the standard we bring to every Dvele panel we set in Claremont.
We also carry a deep bench of 50+ material brands across cabinetry, countertops, plumbing, roofing, windows, doors, fencing, and hardscape. That matters on a Dvele project because a factory-built shell still needs site-finished interiors and exteriors. We specify Kohler and Grohe plumbing fixtures, Cambria and Caesarstone countertops, and GAF or CertainTeed roofing systems where the Dvele roof module ties into site-built work. One contractor. Every phase.
Styles & brands we work with
Common Dvele Construction Problems We Solve in Claremont
- Panel joint telegraphing and cracking at tie-ins. Claremont’s summers are hot and dry, with intense sun at the base of the San Gabriel foothills. When a Dvele prefab core is tied into an older site-built addition, the two systems move differently through the seasonal dry cycles. We re-seal and re-detail those interior cladding joints so the crack doesn’t come back next year.
- Water intrusion at panel butt joints under Santa Ana wind-driven rain. We’ve traced stains on interior walls to a single panel butt joint that collected water during a Santa Ana event. The fix is re-sealing with Dvele OEM sealants and upgrading the flashing termination so wind-driven rain can’t push water sideways into the joint.
- Roof module flashing and fastener terminations that fail under UV and wind uplift. Claremont sits in a WUI (Wildland-Urban Interface) zone. Roof module to wall connections need upgraded fasteners and flashing to satisfy exterior fire detailing requirements. We’ve reworked several of these on Dvele installations in Claremont.
- Panel misalignment on out-of-square older foundations. A 1908 foundation near the Claremont Village isn’t square. Dvele panels are built square. When the two meet, you get visible misalignment along historic-sensitive exterior walls and around window and door openings. We correct the framing and set the panels so the reveal lines read cleanly.
- Roof module connection kits on ranch-era homes from the 1950s and 60s. The south and east sides of Claremont are full of mid-century ranch tracts. Those homes have undersized rafters and lighter framing than Dvele’s steel-frame hardpoints expect. We reinforce the site-built framing before the modules go on, so the roof load path is correct, not just visually complete.
Dvele Service in Claremont: What Local Conditions Mean for Your Equipment
Here’s a Claremont-specific fact that shapes how Dvele construction work plays out here and almost nowhere else in the Inland Empire. The historic Village and college-adjacent streets in Claremont carry preservation-minded review expectations. Exterior remodels and additions on those streets get scrutinized for period-appropriate detailing. That means a Dvele prefab addition or ADU tied onto an early-1900s Craftsman near the Village has to match the original house’s trim profiles, window proportions, and cladding rhythm in a way a Dvele install in a newer inland subdivision never has to. We’ve done this work. On a Craftsman-era property near the Village, the owner wanted a Dvele modular rear addition set behind the original house. Before we set the panel modules, we had to square and reinforce the old framing and re-seal the panel butt joints that had picked up water during a Santa Ana wind-driven rain event. We upgraded the roof module flashing and connectors to meet WUI fire detailing, then matched the new exterior trim to the period of the main house for review. The Dvele addition now sits square, dry, and period-appropriate. That’s the difference between a generic Dvele installer and a Claremont contractor who has actually done it.
Dvele Models & Products We Service in Claremont
We work with the Dvele Signature series modular home systems, prefabricated wall panel and floor cassette assemblies, steel-frame hardpoints and structural ties, roof module connection kits, and prefinished envelope and cladding integration packages. Our parts approach is straightforward: we specify Dvele OEM panel connectors, sealants, and factory flashing where they carry the system warranty, and we match them with tested aftermarket flashing and fasteners only where the OEM part isn’t the controlling detail. If a panel joint or membrane can be correctly repaired and re-sealed, we fix it. If movement or water has compromised the module itself, we’ll tell you that replacement is the sounder path. We won’t sell you a repair that buys you one season.
For broader Dvele context, see our Dvele sales & service page, and our Claremont service area coverage for the full range of remodeling work we do throughout the 91711 ZIP.
See the difference
Before
After
Before
After
Before
AfterDvele Service Pricing in Claremont
Dvele-based work in Claremont costs more than a generic soffit patch or panel re-seal job because the work touches factory tolerances, historic-sensitive review, and WUI exterior detailing. Here are the line-item ranges we work within for Dvele-related scopes in Claremont:
| Service | Price Range |
|---|---|
| Home Addition (Dvele panel based) | $45,000 – $130,000 |
| ADU Construction (Dvele prefab) | $90,000 – $220,000 |
| Roof Repair (Dvele roof module tie-in) | $400 – $1,800 |
| Garage Conversion (Dvele panel systems) | $30,000 – $80,000 |
What drives the number in Claremont: the age and squareness of your existing foundation, whether the project sits in a historic-review zone near the Village, how much WUI fire detailing the roof and exterior envelope need, and whether we’re setting new Dvele modules or repairing an existing install. A free estimate includes a written line-item breakdown of everything above. Call (877) 752-3154.
Serving Claremont, CA — Our Local Coverage Area
We’re based in the Claremont area and know this community well, and we also provide Dvele service in Upland. Use the map below to see our full service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dvele Construction in Claremont
Yes, but it requires the right prep. The older Craftsman framing near the Village is rarely square, and Dvele panels are factory-square, so we have to reinforce and true up the existing frame before setting panels. The exterior also has to match period trim and window proportions for historic-sensitive review. Call (877) 752-3154 and we’ll walk the property with you.
Claremont’s hot-summer Mediterranean climate drives seasonal expansion and contraction between a Dvele prefab core and any older site-built framing it’s tied into, which is what causes panel joints to telegraph or crack. Santa Ana wind-driven rain pushes water sideways into any imperfect butt joint, so we re-seal with Dvele OEM sealants and upgrade flashing terminations. The fix holds when the detailing is right.
Both. We set new Dvele Signature series wall panels, floor cassettes, and roof modules on Claremont additions and ADUs, and we repair and re-seal existing Dvele installations, including Dvele repair in San Antonio Heights. We’re independent, not authorized by Dvele, and we don’t speak for them. We bring trade-side field experience adapting their systems to this city’s older lots.
A Dvele-based home addition in Claremont typically runs $45,000 – $130,000, and a Dvele prefab ADU runs $90,000 – $220,000. The spread depends on your foundation condition, historic-review requirements, WUI fire detailing, and interior finish level. Call (877) 752-3154 for an exact quote, estimates are free.
Yes, but it depends on the garage. A 1950s ranch-era garage on the south side of Claremont usually has a slab and framing we can work with directly. An older detached garage near the Village may need structural reinforcement first. Garage conversions with Dvele panels in Claremont typically run $30,000 – $80,000. Call (877) 752-3154 and we’ll tell you what your garage can actually take.
Service Areas Near Claremont
We run Dvele service throughout Claremont and into the surrounding foothill and inland communities. That includes Eastvale, Corona, Running Springs, Banning, Sedco Hills, and Crestline. If you’re in a nearby community and weighing Dvele for an ADU or addition, we’re set up for it. See Dvele service in Foothill Ranch and Dvele service in Coto De Caza for coverage details in those areas.
Book Your Dvele Service in Claremont Today
If you’re planning a Dvele addition, ADU, or garage conversion in Claremont, need Dvele repair in La Verne, or have an existing Dvele install with a panel joint problem or roof module issue, call (877) 752-3154 for a free estimate. We’ll walk the site, check the framing and panel conditions, and give you a written line-item quote before anything gets ordered.
Written by Noel Trevino, Owner at Moreno Valley Builders, serving Claremont and the Inland Empire for three decades.