Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Construction in Fontana, CA | Moreno Valley Builders
We provide independent Dvele construction service across Fontana, from the 1950s-era stucco tract homes in 92335 to the newer planned communities north of the 210 in 92336 and 92337. What makes our Dvele work here different is that we know how these panelized, factory-built wall and roof assemblies actually behave after a few Fontana summers: the dry heat shrinks wood framing, the Santa Anas drive dust into every seam, and a panel set that looked perfect on paper needs real site work to perform. We’re not an authorized Dvele dealer, and we won’t pretend to be. We’re an independent general contractor who has spent years learning their systems, reading their panel drawings, and finishing the site work those panels depend on. Call (877) 752-3154 for a free estimate on your Dvele project.
Why Fontana Residents Choose Us for Dvele Service
Dvele’s panelized construction isn’t a system you learn from a brochure. Noel Trevino, our owner and general contractor, grew up in the Sunnymead Ranch area of Moreno Valley and has spent the better part of three decades building and renovating homes across the Inland Empire. He learned framing, concrete, and mechanical systems at Riverside City College, and that foundation has held up better than a lot of the work he’s had to tear out and redo. When it comes to Dvele specifically, we’ve spent years working on their closed and open panel systems, roof panel and truss assemblies, and modular core units for ADUs. We read the panel drawings before we touch anything. We respect their tolerance specifications. And we source Dvele-supplied connectors, gaskets, and sealants because those are the only reliable match to the factory tolerances. For Fontana homeowners, that means your Dvele project gets handled by a team that knows the system and knows this city. Dvele sales & service through an independent contractor who actually builds in your climate.
Styles & brands we work with
Common Dvele Construction Problems We Solve in Fontana
- Panel seam cracking and air intrusion from dry-heat framing shrinkage. Fontana’s hot, dry summers pull moisture out of wood framing fast. When that framing shrinks, the seams between Dvele wall panels open up microscopically, and once air and dust start moving through, the cracking shows up on the stucco. We pull the seam back to the panel substrate, re-seal with the OEM gasket and flashing spec, and re-stucco so the joint stays closed.
- Flashing failures at panel junctions under Santa Ana wind-driven dust and rain. The factory seam where a Dvele panel meets field-applied stucco is a vulnerable point. Santa Ana winds in Fontana push dust and driving rain straight at those junctions. We repair the flashing, re-seal the penetration, and make sure the transition sheds water instead of trapping it.
- Moisture trapped at panel-to-foundation connections. When a Fontana slab or stem wall isn’t cured and graded to Dvele’s moisture spec, water wicks up into the panel base. Over time that rots the bottom plate and compromises the envelope. We correct the grading, install the proper capillary break, and replace any damaged material.
- Site-built modifications and MEP chases field-cut into the panel skin without re-sealing. This happens often when a plumber or electrician needs to run a line through a Dvele panel and doesn’t re-seal the penetration. In Fontana’s climate, an unsealed chase becomes an air leak and a dust entry point within a season. We re-seal to spec and verify the envelope still performs.
- Stucco over panelized walls that was never flashed correctly at corners and window returns. Older south-side Fontana homes in 92335 often have decades of patchwork stucco work. When that stucco ties into a Dvele panel assembly, the transition points fail first. We cut back the damaged stucco, install proper flashing, and re-coat so the assembly sheds water the way it should.
Dvele Service in Fontana: What Local Conditions Mean for Your Equipment
Fontana’s north-side master-planned subdivisions in 92336 and 92337 were laid out on large graded pads with tight lot lines. That matters for Dvele work more than most people realize. A Dvele panel set or ADU placement that looks clean on a set of drawings can hit a side-yard setback or a utility easement that never showed up on paper. We’ve seen it happen: the pad looks huge from the street, but the actual buildable envelope after setbacks and easements is a lot smaller than the lot dimensions suggest. Before any panel order is released for a Fontana property, we run a site survey and setback check against the city’s current zoning. If the details aren’t right on paper, they won’t be right in the wall. That’s one reason we won’t order Dvele panels until we’ve walked the site and verified the actual buildable area, not the imaginary one on the marketing brochure.
On a two-story home in the north-side planned communities around 92336, our crew got called in when a Dvele wall-panel seam at the rear elevation started showing stucco cracking and air intrusion after a hot, dry summer. We pulled the seam back to the panel substrate, re-sealed the factory joint with the OEM gasket and flashing spec, then re-stuccoed and re-graded the adjacent flatwork so water and dust shed away from the panel base. No panel replacement was needed once the seal and slope were corrected. That’s the difference between a contractor who reads the panel drawings and one who just patches the symptom.
Fontana’s split housing stock makes this city different from Dvele in Pedley, Moreno Valley or Loma Linda. Central and south Fontana in 92335 is full of older single-story stucco tract homes from the 1950s through the 1970s. On those streets, contractors routinely find unpermitted garage conversions and add-ons from decades of DIY work, which means square-footage discrepancies and unpermitted construction often surface during a remodel and have to be brought up to code before a Dvele panel system can be tied in. The north side in 92336 and 92337 is the opposite: newer two-story stucco homes built from the 1990s onward, with tight lots and strict HOAs. A Dvele project has to be handled differently depending on which side of the city you’re on, and we work both.
Dvele Models & Products We Service in Fontana
We work on the full range of Dvele systems: prefabricated wall panel assemblies in both closed and open panel configurations, roof panel and truss systems for single-story and two-story plans, and modular or panelized core units for ADUs and additions. When a Dvele panel set needs repair, we source Dvele-supplied connectors, gaskets, and sealants whenever the schedule allows, because those are the only parts that reliably match the factory tolerances. Where Dvele’s spec permits, we use tested, code-listed equivalents. We keep common Dvele sealant and flashing materials stocked for fast turnaround on Fontana repair calls. And we’re honest about when a panel can be re-sealed and flashed versus when it has to be swapped. Repair first, replace only when the panel is truly compromised.
See the difference
Before
After
Before
After
Before
AfterDvele Service Pricing in Fontana
Dvele construction pricing in Fontana depends on the scope: a simple seam re-seal is a repair call, while a full kitchen remodel or ADU construction is a multi-week project. Here’s what current market pricing looks like for the work we do most often in Fontana:
| Project | Typical Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Roof Repair | $400 – $1,800 |
| Roof Replacement | $8,000 – $20,000 |
What drives the cost is the condition of the existing structure, whether unpermitted work has to be corrected first, and how much site preparation the Dvele panels require. A free estimate from us includes a site walk, a review of your panel drawings if you have them, and a written line-item quote. Call (877) 752-3154 to schedule yours.
Serving Fontana, CA — Our Local Coverage Area
We’re based in the Fontana area and know this community well, and we also handle Dvele repair in Bloomington. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dvele Construction in Fontana
Yes, and it’s often the smartest way to add square footage to a Dvele home without dealing with mismatched site-built framing. We match the new panel set to the existing panel tolerances, re-seal the junction between old and new, and tie the roof system in so the envelope stays continuous. Full Kitchen Remodeling and Home Addition work are two of the most common Dvele projects we handle in Fontana. Call (877) 752-3154 for an exact quote on your addition.
The primary cause is dry-heat framing shrinkage. Fontana’s summers pull moisture out of the wood framing inside the panel assembly, and when that framing shrinks, the panel seams open up. If the original flashing or gasket was installed a little off-spec, the problem shows up faster. We repair the seam at the substrate level, not with a surface patch. Call us at (877) 752-3154 and we’ll diagnose it.
It can, but the unpermitted conversion has to be addressed first. If the existing garage conversion was never permitted, the city will want it brought up to code or removed before a new Dvele ADU is approved. We handle that process: we assess what’s existing, coordinate with Fontana’s building department, and then move forward with the Dvele ADU design once the site is clean. The same process applies for Dvele in Rialto. Call (877) 752-3154 and we’ll walk you through it.
Setbacks, easements, and the actual buildable envelope. On the north side in 92336 and 92337, tight lot lines mean a panel set that fits on paper can violate a side-yard setback once it’s on the ground. We run a site survey and setback check against Fontana’s current zoning before any panel order is released.
Repair is usually smarter if the damage is limited to seams, flashing, or a few panel penetrations. Roof Repair runs $400 to $1,800 in Fontana and can add years to a Dvele roof. Replacement, at $8,000 to $20,000, makes sense when the panels themselves are compromised or the roof has multiple failed junctions. We’ll tell you which one you need, not which one makes us more money.
Service Areas Near Fontana
We serve Fontana and the surrounding Inland Empire communities, including Fontana service area coverage across all four local ZIP codes. Our Dvele work also reaches Dvele service in Sun City to the south, Dvele service in Quail Valley further out, plus Moreno Valley, Loma Linda, Grand Terrace, and the March Air Force Base area. If you’re near any of those, we’ll come out.
Book Your Dvele Service in Fontana Today
If you have a Dvele panel home in Fontana and something’s not right, or you’re planning an addition, ADU, or kitchen remodel, call (877) 752-3154. We’ll walk the site, read the drawings, and tell you exactly what it takes. Free estimates, no pressure.
Written by Noel Trevino, Owner & General Contractor at Moreno Valley Builders, serving Fontana, Dvele in Glen Avon, and the Inland Empire.