Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Construction in Mountain View, CA | Moreno Valley Builders
We provide independent ES Windows service across Mountain View, from the mid-century ranches off El Camino Real to the Eichler tracts near downtown. For homeowners looking beyond our area, we also handle ES Windows in Sunnyvale. We’re not a manufacturer-authorized shop, and that’s the point: we size every ES Windows unit to the actual rough opening and structural grid, which matters more in Mountain View than almost anywhere else in the Bay Area. The quick answer: if your ES Windows unit is fogged, binding, or leaking, we repair what’s sound and replace what isn’t, using OEM parts where they still exist. Call (877) 752-3154 for a free estimate.
Why Mountain View Residents Choose Us for ES Windows Service
Mountain View housing runs in two directions. There are the 1950s and 60s single-story ranch homes, many with original aluminum windows never meant to last six decades. Then there are the Eichler-style post-and-beam houses with flat or low-slope roofs, radiant slab heating, and no attic to speak of. Both present real challenges for ES Windows installation that a crew only learns by working them repeatedly. Our team has installed and serviced ES Windows units across the Peninsula and South Bay for over a decade, so we know the exact frame profiles, glazing options, and failure points of the brand. Noel Trevino, our owner and General Contractor – Mountain View, learned framing, concrete, and mechanical systems at Riverside City College before spending the better part of three decades building and renovating homes across the Inland Empire and now the Bay Area. That background matters when a rough opening is out of square and the window has to fit anyway.
Because we’re independent, we can specify the right ES Windows series for your opening without being locked into a single distributor’s inventory. That means a real choice between a 2000 Series single-hung, a 3500 Series sliding door, or a 4000 Series casement based on what the house actually needs, not what’s sitting in a warehouse. Our ES Windows sales & service work covers full-frame replacements, glass swaps, hardware repairs, and weatherseal upgrades across the Mountain View service area.
Styles & brands we work with
Common ES Windows Construction Problems We Solve in Mountain View
Mountain View’s climate and housing stock create a specific set of ES Windows failure patterns. Here’s what we see most often:
- Fogged insulated glass units from seal failure. Mountain View’s Eichler-style homes often have large fixed panes that face direct valley sun for hours. The seal fails, condensation builds between the lites, and the glass is done. We replace the IGU and test the frame before anyone talks about a full window swap.
- Vinyl frame warping and sash binding in post-and-beam homes. Without an attic buffer, interior temperatures swing hard between day and night. Vinyl expands and contracts, weatherstripping gets stressed, and sashes start to bind. We see this regularly in the mid-century tracts near downtown Mountain View.
- Water intrusion at sill pans and corner welds on low-slope roof tie-ins. Original flashing on 1960s homes was never updated for modern replacement units, so winter rain finds its way in at the sill. We re-flash with a custom pan and seal the corner welds properly.
- Corroded or failed sliding-door rollers and tracks. Seasonal winter rains pool at the threshold when drainage is poor, corroding rollers over time. A 3500 Series sliding glass door that won’t glide is usually a roller and track issue, not a full door replacement.
- Out-of-square rough openings from post-and-beam settling. This is the one that catches people off guard. The original structural grid shifts over decades, and an off-the-shelf unit won’t sit right. We shim to the grid and size the window accordingly.
ES Windows Service in Mountain View: What Local Conditions Mean for Your Equipment
Here’s the Mountain View-specific reality that never shows up on a generic ES Windows page. Many Eichler-style homes in the city have no attic and no conventional ductwork. Heat comes from radiant slabs, and the structure is post-and-beam with exposed framing. When you replace windows in that kind of house, you can’t just cut a bigger opening or pad a smaller one. Every ES Windows unit has to be sized and flashed to the original structural grid. If the grid says 47 inches, you’re installing a window that fits a 47-inch opening, not one that fits a 48-inch standard rough opening with shims. That changes the entire installation sequence, from measuring and ordering to flashing and trim. It’s why we send a crew lead, not a salesperson, to measure windows in Mountain View. If the details aren’t right on paper, they won’t be right in the wall.
We recently replaced a fogged ES Windows 2000 Series single-hung in a 1960s Eichler near downtown Mountain View. The original aluminum frame had corroded at the sill, and the rough opening was out of square due to the post-and-beam settling. We re-flashed the opening with a custom pan, shimmed the new vinyl unit to the structural grid, and installed a tempered IGU to meet current safety glazing. No more fog, and a tight seal against the winter rain that blows through the valley.
ES Windows Models & Products We Service in Mountain View
We service and install the ES Windows 2000 Series vinyl single-hung, the 1000 Series aluminum single-hung, the 4000 Series casement, and the 3500 Series vinyl sliding glass door. Sourcing matters here because ES Windows has changed manufacturing over the years, and some older model lines have OEM glass that’s no longer produced. We source OEM ES Windows replacement sashes, rollers, and weatherstripping for exact fit, and use quality aftermarket IGUs when OEM glass is discontinued. The frame gets inspected and the hardware gets tested before we ever recommend full replacement. A sound frame with failed glass is a glass job. A warped frame with a compromised rough opening is a full unit swap with proper flashing. That’s the repair-vs-replace decision we walk every customer through.
See the difference
Before
After
Before
After
Before
AfterES Windows Service Pricing in Mountain View
What you’ll pay depends on whether we’re swapping glass, rebuilding hardware, or doing a full-frame replacement. Home Remodeling – Mountain View projects like window replacement typically run $4,500 to $15,000 depending on the number of units, frame condition, and whether we’re dealing with standard ranch construction or post-and-beam Eichler framing. Impact-rated ES Windows installations run higher, from $8,000 to $25,000, and roof work that ties into window flashing runs $400 to $1,800 for repairs or $8,000 to $20,000 for full replacement. Here’s the breakdown:
| Service | Price Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Repair | $400 – $1,800 |
| Roof Replacement | $8,000 – $20,000 |
Your free estimate includes a site visit, a frame and rough-opening inspection, and a written line-item quote. No change orders sprung on you after the work starts. Call (877) 752-3154 to schedule yours.
Serving Mountain View, CA — Our Local Coverage Area
We’re based in the Mountain View area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – ES Windows Construction in Mountain View
Yes. Radiant slab heating runs through the floor, not the walls, so replacing windows doesn’t require cutting into the slab. What we do have to work around is the post-and-beam frame, which means sizing units to the structural grid and flashing to the original openings. The slab stays untouched. Call (877) 752-3154 if you want us to look at your specific openings.
The 2000 Series vinyl single-hung is what we see most often in Mountain View’s 1950s and 60s ranch homes, usually as a replacement for original aluminum units that corroded at the sill. In Eichler-style homes, we see more fixed-pane and large-format glass, which often points to a different series or a custom-size order.
We pull permits when the scope requires them, and we know Mountain View’s process. Window replacement that doesn’t change the opening size is typically straightforward, but post-and-beam homes can trigger structural review if the opening is modified. We handle the paperwork and the inspections as part of the job.
Winter rain pools at sliding-door thresholds when drainage is poor, which corrodes rollers and tracks over time. If your 3500 Series sliding door is getting harder to open every season, the rollers are likely the problem, not the glass. We replace the rollers and adjust the track, and we’ll re-grade the threshold if water is sitting there. Call (877) 752-3154 for an exact quote; estimates are free.
We can match most ES Windows frame finishes, though the older the unit, the more likely the exact color has been discontinued. When an exact match isn’t available, we’ll show you the closest current finish and the closest custom option so you can decide based on cost and look.
Service Areas Near Mountain View
We serve Mountain View and the surrounding Peninsula cities, including Los Altos, Los Altos Hills, Palo Alto, Sunnyvale, and Cupertino. We also cover communities across the South Bay regularly. If you’re in ES Windows service in Los Altos or ES Windows service in Los Altos Hills, we can extend the same crew and the same approach to your job.
Book Your ES Windows Service in Mountain View Today
If your ES Windows units are fogged, binding, or leaking, don’t wait for the next winter rain to make it worse. Call (877) 752-3154 to schedule a free estimate. We’ll inspect the frames, measure the openings, and give you a written quote with real numbers.
Written by Noel Trevino, Owner at Moreno Valley Builders, serving Mountain View and the surrounding Peninsula since 2010.