Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Construction in Murrieta, CA | Moreno Valley Builders
We provide ES Windows service in Murrieta Hot Springs and across Murrieta, CA, and the thing that separates our work here is that we know exactly how these specific builder-grade units fail after 20 to 30 years under inland Riverside County sun. Most of Murrieta’s homes were built in tight master-planned tracts during the 1990s and 2000s, which means thousands of ES Windows aluminum and vinyl units are hitting their failure window at the same time: fogged dual-pane seals, worn slider rollers, and chalked frames that no longer seal against Santa Ana wind. We’re Moreno Valley Builders, led by Noel Trevino, and we handle ES Windows repair and replacement from the first inspection through HOA submittal and final inspection. Call (877) 752-3154 for a free estimate.
Why Murrieta Residents Choose Us for ES Windows Service
Noel Trevino grew up in the Sunnymead Ranch area of Moreno Valley and has spent the better part of three decades building and renovating homes across the Inland Empire, so when a Murrieta homeowner calls about a fogged ES Windows unit from a 1998 Bear Creek or The Colony tract, he already knows what the frame is going to look like before we pull the trim. We’re an independent contractor, not affiliated with or authorized by ES Windows, which means our recommendations come from what actually holds up in your home, not from moving a manufacturer’s inventory. We use OEM ES Windows replacement glass, screens, rollers, and weatherstripping when the frame is sound and the unit is worth keeping, and we spec quality aftermarket insulated glass when OEM lead times or cost don’t make sense. If the details aren’t right on paper, they won’t be right in the wall.
Our ES Windows sales & service work covers Murrieta’s 92562, 92563, and 92564 ZIP codes, and we carry the common parts these older tract homes need so we don’t have to chase down a distributor in San Bernardino every time a roller fails.
Styles & brands we work with
Common ES Windows Construction Problems We Solve in Murrieta
- Fogged dual-pane insulated glass units. The single most common call we get in Murrieta. On south- and west-facing ES Windows aluminum units from the 1990s and 2000s, the glazing seal breaks down under relentless UV, and you get condensation between the panes. We replace the failed IGU and can often keep the original frame.
- Dragging or jumping sliding door and window panels. ES Windows sliders from this era used rollers that corrode and flat-spot after two decades of Murrieta dust, track grit, and hard water from the local supply. Panels start to drag, then jump the track. We swap the rollers, clean and realign the track, and the door glides again.
- Chalked aluminum and sun-rotted vinyl frames. Intense inland UV takes a visible toll on original ES Windows finishes. Aluminum turns chalky and white oxide streaks run down the stucco. Vinyl frames get brittle and crack at the corners. We can refinish frames that are structurally sound and replace those that aren’t.
- Stucco-to-frame caulk and flashing failure. Murrieta’s dry heat dries out perimeter caulk fast. When it pulls away from the window frame, winter wind-driven rain works its way under the stucco and into the wall cavity. We pull the old caulk, inspect the flashing, and reseal the perimeter properly.
- Worn screens and failed screen tracks. ES Windows screen frames from this era were thin aluminum, and they bend, split, and tear. The tracks wear out too, so screens rattle in the wind or won’t seat. We rebuild or replace screens and repair the track so they actually work.
ES Windows Service in Murrieta: What Local Conditions Mean for Your Equipment
Because Murrieta’s 92562 and 92563 master-planned communities—and ES Windows in Sedco Hills nearby—went up in tight building windows, whole streets hit failed ES window seals and worn sliding-door rollers at the same time. Walk down a block in Bear Creek or The Colony in 2026 and you’ll see the same pattern: original ES Windows aluminum sliders fogging on the south elevation, patio door rollers dragging on the north side where less sun reaches, and caulk pulling away from stucco on every house that hasn’t been re-sealed since the original build. It’s not random. The homes were all built within a few years of each other, the materials were the same, and they’ve all absorbed the same two-plus decades of UV, Santa Ana wind, and winter rain. What this means for ES Windows owners is that you’re rarely the only one on your street dealing with it, and it also means your HOA has likely already seen this exact repair request before. Exterior window changes in these communities have to clear the architectural committee for color and style before the city permit gets pulled. We’ve worked through that process enough times in Murrieta to know what passes review and what gets kicked back, and we’ll prepare the submittal with that in mind.
In Bear Creek we re-glazed and re-tracked a set of original ES Windows aluminum sliders where the dual-pane seals had fogged and the rollers were dragging after two decades of sun. We replaced the failed insulated glass units, swapped the rollers and screens, and re-caulked the stucco perimeters before the Santa Ana season, then matched the HOA-approved trim color on the frames so the homeowner passed architectural review without a redo.
ES Windows Models & Products We Service in Murrieta
We also provide ES Windows service in Temecula and work on the product lines that went into Murrieta’s 1990s and 2000s tract housing. That includes ES Windows aluminum single-hung and sliding windows, the builder-grade units common in Bear Creek, The Colony, and the surrounding master-planned communities. We also service ES Windows vinyl single-hung and horizontal slider series, ES Windows sliding glass patio doors, and fixed and picture window units with aluminum frames. On parts, our approach is simple: OEM ES Windows replacement glass, screens, rollers, and weatherstripping when the frame is worth keeping, and quality aftermarket insulated glass when OEM lead times don’t make sense for a 25-year-old unit. We’ll be straight with you when a frame is too far gone to re-glaze. Murrieta’s UV load usually makes that call obvious.
See the difference
Before
After
Before
After
Before
AfterES Windows Service Pricing in Murrieta
What you’ll spend depends on whether we’re repairing an existing ES Windows unit or replacing it entirely. Re-glazing a fogged dual-pane IGU costs less than a full replacement, but if the frame is chalked, warped, or the flashing is compromised, replacement is the honest recommendation. Here’s what our Murrieta customers can expect:
| Service | Price Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Repair | $400 – $1,800 |
Every estimate includes a line-item breakdown and a look at the surrounding flashing, stucco, and caulk, because a window leak in Murrieta rarely stops at the window. Call (877) 752-3154 to schedule yours, free.
Serving Murrieta, CA — Our Local Coverage Area
We’re based in the Murrieta area and offer ES Windows in Wildomar and nearby communities. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – ES Windows Construction in Murrieta
Yes, in most cases we can. If the aluminum or vinyl frame is square, the glazing stop isn’t cracked, and the frame isn’t so chalked that it’s structurally done, we can remove the failed insulated glass unit and install a new OEM or quality aftermarket IGU. It’s a meaningful cost savings over full replacement, but there are times when a 25-year-old ES unit is better replaced than re-glazed. We’ll tell you which side of that line your windows fall on. Call (877) 752-3154 and we’ll do a no-charge inspection to find out.
Yes, it almost always does. If you live in Bear Creek, The Colony, or another HOA-governed Murrieta community, the architectural committee controls exterior colors, materials, and window styles. You need their approval before you change the look or the material of any exterior window. We prepare submittal packets that match what Murrieta HOAs expect, and we’ve done enough of these to know what gets flagged.
Yes. Impact-rated windows with laminated glass and upgraded frames hold up far better under repeated Santa Ana wind cycles than the original builder-grade ES units, and the low-E coatings we spec reduce the heat load that pours through south- and west-facing glass in summer. If you’re replacing original ES Windows anyway, this is the time to look at impact-rated options. Call (877) 752-3154 for pricing on impact window installation in Murrieta.
The rollers are worn out or the track is gunked up with dust and hard-water scale, or both. On Murrieta ES sliders from the 1990s and 2000s, the original rollers were undersized for the panel weight and they flat-spot over time. We pull the panel, replace the rollers with properly rated ones, clean and realign the track, and the door moves like it should again.
Yes, and it’s more common in Murrieta than people expect. When the caulk bond between an ES window frame and the stucco fails, wind-driven rain from winter storms works its way into the wall cavity and travels down, sometimes showing up as a water spot near the ceiling or a damp patch at the baseboard. We also check the roof flashing and fascia during the same inspection because water moves. If there’s a leak, we trace it to the actual source. Call (877) 752-3154 to schedule a leak inspection.
Service Areas Near Murrieta
Moreno Valley Builders serves the full Murrieta service area along with nearby communities across the Inland Empire. We routinely work in Moreno Valley, March Air Force Base, Loma Linda, Highgrove, Mead Valley, and Grand Terrace. If you’re just outside Murrieta, we likely cover you too. We also provide ES Windows service in Chino and ES Windows service in Los Serranos for homeowners in those areas.
Book Your ES Windows Service in Murrieta Today
If your ES Windows are fogged, dragging, leaking, or simply worn out, call (877) 752-3154 to schedule a free estimate. We’ll inspect the units, give you a line-item scope of work, and handle the HOA and permit process if it’s needed.
Written by Noel Trevino, Owner & General Contractor at Moreno Valley Builders, serving Murrieta and the Inland Empire since 2003.