Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Communications Hill, CA | Moreno Valley Builders
We handle independent Jerith aluminum fence, gate, and railing service across Communications Hill, from full installs on new lot lines to panel-and-post repairs on runs that have been up since the 1990s. The thing that sets our Jerith work apart here is simple: before we set a single post, we probe for the buried retaining walls and old site utility corridors left over from the hill’s communications-era past. A Jerith fence on flat San Jose ground is one job; on a cut-and-fill Communications Hill slope, the footing work is the job. Call (877) 752-3154 for a free estimate.
Why Communications Hill Residents Choose Us for Jerith Service
We’ve worked on Jerith ornamental aluminum fencing and railing across San Jose’s hillside subdivisions for years, handling everything from Jerith repair in San Jose to ridgeline installs, long enough to know which series holds its powder coat on a west-facing ridgeline and which post-mount hardware seizes after two wet winters. We’re an independent contractor, not authorized by or affiliated with Jerith, so the recommendations we give come from pulling panels and re-setting posts, not from a manufacturer program. That independence matters when a homeowner needs an honest read on whether to repair or replace.
Noel Trevino, our owner and general contractor, grew up in the Sunnymead Ranch area of Moreno Valley and cut his teeth at Riverside City College learning framing, concrete, and mechanical systems the slow way. After the better part of three decades fixing projects that went sideways, he’s got a clear rule: “If the details aren’t right on paper, they won’t be right in the wall.” On a Jerith fence line, that means checking the grade, the exposure, and what’s buried before we ever open a post hole. It’s why Communications Hill homeowners call us when a fence from another contractor starts leaning or a gate won’t latch.
We’re also the company behind Jerith sales & service across the broader San Jose footprint, and we bring that same parts access and install discipline to every hillside lot we touch. One contractor, every phase, from permits to punch list.
Styles & brands we work with







Common Jerith Construction Problems We Solve in Communications Hill
- Powder-coat chalking and fade on west- and south-facing runs. Communications Hill sits above the valley fog line, so those elevations get more UV and wind than the valley floor. Jerith’s factory finishes hold up well, but a run facing the Santa Cruz Mountains for fifteen years will chalk to a dull gray and lose its gloss. We replace sun-damaged panels with matching Jerith components and can spec a finish approach for the reruns.
- Post base and footing movement on graded hillside lots. The cut-and-fill ground from the old communications-equipment site settles at different rates, and a shallow-set post in backfill will rack and pull gate latches out of alignment. We re-set posts in deeper concrete, clear of the fill zone.
- Galvanized hinge and latch hardware seizing after winter storms. Atmospheric-river wetting is a fact up here, especially next to drainage swales and downspout discharge. Standard hardware corrodes and gates start dragging. We replace with sealed or stainless aftermarket hardware matched to the Jerith profile.
- Panel-to-post picket weld and clip failures from ridgeline wind load. The top of the hill and unscreened runs catch gusting that fatigues clip connections over time. We replace pickets and re-clip panels so the run doesn’t rattle in a stiff breeze.
- Racking where panels were forced to follow a slope instead of stepped. On a steep hillside lot, forcing panels to angle with the ground twists the rails and pops pickets. We re-work the run as stepped sections, which is the way Jerith panels are designed to be installed.
Jerith Service in Communications Hill: What Local Conditions Mean for Your Equipment
Communications Hill was built out almost entirely from the late 1980s through the 2000s on cut-and-fill slopes above the old IBM and communications-equipment site. That leaves a specific signature on the ground: engineered retaining walls, drainage swales, and original site utility corridors that cross lots in ways standard parcel maps don’t show. Before we set a single Jerith post here, we probe the fence line for those buried walls and corridors, because a post hole punched into a retaining-wall backfill or a live site conduit is a much bigger problem than a leaning panel. Areas like Jerith service in Cambrian Park or other flat-lot neighborhoods never have to think about any of that. Up here, on streets above Capitol Expressway, it’s the first thing we look for.
That’s also why we lean toward repair before full replacement on Communications Hill. A Jerith aluminum panel will outlast the footing it sits on, and when a run is sound, we’d rather re-set the posts and replace only what’s sun- or storm-damaged. The panels aren’t the weak link; the hill is.
Jerith Models & Products We Service in Communications Hill
We install and repair the Jerith Regent series, the Provence and Charleston ornamental aluminum styles, Jerith pool-code and barrier fence panels, and Jerith deck and stair railing with decorative pickets. That covers most of what was originally specified in Communications Hill’s PUD build-out and what gets requested for replacement today. We use genuine Jerith panels, pickets, post caps, and hardware wherever the series is still supported, so the finish and profile match the existing run. Where a Jerith part is discontinued or under-spec’d for a ridgeline exposure, we use quality aftermarket aluminum hardware that holds up better in wind-driven rain. Your project, your material choices.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Communications Hill
| Service | Price Range |
|---|---|
| Aluminum Fence Installation | $4,000 – $10,000 |
| Aluminum Fence Repair (panel & post replacement) | $400 – $1,800 |
What moves the number is footing work. A flat, open run with clean access will sit at the lower end; a hillside lot with buried retaining wall probes, swale clearance, and post re-setting will push toward the upper. We provide written line-item quotes before work starts, with no change orders on the back end. Call (877) 752-3154 to schedule a free estimate, and we’ll walk the fence line with you and tell you exactly what it needs.
Serving Communications Hill, CA — Our Local Coverage Area
We’re based in the Communications Hill area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Communications Hill
Yes. Hillside lots require deeper post footings set below the fill zone, stepped panel runs instead of sloped ones, and a probe pass to locate any buried retaining wall backfill or site utility corridors before digging. Flat lots don’t face those constraints. Call (877) 752-3154 for an assessment of your specific lot.
It’s likely the exposure. Communications Hill sits above the fog line, and west- and south-facing runs get hours more direct UV and wind than valley-floor fences. Jerith’s finish is solid, but no powder coat survives a hillside ridgeline forever. We can replace only the sun-damaged panels with matching Jerith components rather than a full tear-out.
Usually the ground. Winter storms saturate the cut-and-fill soil, and shallow-set posts shift enough to pull the latch out of alignment. We find this on the upper streets above Capitol Expressway regularly, unlike down in Jerith in Buena Vista where drainage is simpler. We’ll re-set the posts in deeper concrete clear of drainage swales and replace any seized hardware. Call (877) 752-3154 for an exact quote – estimates are free.
Most likely yes. The Communications Hill planned-unit development has architectural review baked into its governing documents, and fence styles, colors, and heights all get looked at. We prepare the submittal package with Jerith’s spec sheets and finish options, so the review board gets what it needs the first time.
In almost every case, yes. If your series is still supported, we order genuine Jerith panels and pickets in the same profile and finish so the repair blends with the original run. If the series is discontinued, we’ll source the closest matching aftermarket profile and tell you honestly what it’ll look like before we install it.
Service Areas Near Communications Hill
We serve the whole Communications Hill service area and the surrounding San Jose hillside communities. If you’re just over the hill, take a look at our Jerith service in Lompico and Jerith service in Ben Lomond pages. We also handle Moreno Valley, March Air Force Base, Loma Linda, Highgrove, Mead Valley, and Grand Terrace.
Book Your Jerith Service in Communications Hill Today
If your Jerith fence is chalked, leaning, or the gate won’t latch after winter, we’ll fix it properly. Call (877) 752-3154 to schedule a free estimate, and we’ll send a crew that knows this hill.
Written by Noel Trevino, Owner at Moreno Valley Builders, serving Communications Hill and the Inland Empire.