Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Mountain View, CA | Moreno Valley Builders
We install and repair Jerith ornamental aluminum and vinyl fencing across Mountain View, from the 94035 ZIP up through 94041. We’re an independent crew, not a Jerith-authorized dealer, and the one thing that separates our Jerith work here is that we treat every fence or gate as part of a property with Eichler-era boundaries, flat-roof drainage patterns, and post-and-beam anchors that standard installers miss. If your Jerith fence is leaning, binding, or blowing panels, call (877) 752-3154 for a straight answer.
Why Mountain View Residents Choose Us for Jerith Service
Most fence crews in the Santa Clara Valley can set a post. What they don’t always catch is what Mountain View throws at a fence line: original survey corners that don’t match the plot plan, shallow eave overhangs, ground that shifts between wet winters and dry summers. We’ve spent decades fitting Jerith panels and posts onto these lots, and the difference shows in how we stake, set, and rack. Jerith sales & service is the core of what we do on fencing, and Noel Trevino, our owner and general contractor, grew up learning construction the hard way: putting right what other crews got wrong. He approaches every fence and roof job the same way: measure against what’s actually there, not what the original drawing says should be there.
Styles & brands we work with
Common Jerith Construction Problems We Solve in Mountain View
- Racked-off-plumb posts on Eichler-era lots. Mountain View’s flat-roof additions rarely re-established original survey corners, so the boundary line on paper doesn’t match the ground. Factory Jerith posts get forced off vertical trying to follow a line that isn’t actually there. We re-stake before setting a post.
- Chalked and chipped powder-coat on south-facing runs. Valley summer heat bakes the sun-exposed panels while wet winters swell the ground. Stock Jerith aluminum pickets on south-facing fence lines show the first powder-coat failure, and posts set shallow walk with the season. Deeper footings and touch-up coating solve both.
- Over-racked panels on sloped shoulders. Rackable Jerith aluminum panels chasing grade near downtown get pushed past the manufacturer’s adjustment limit. That stresses the picket-to-rail fasteners until they loosen or shear. We set the panel within spec and grade the line instead of forcing the hardware.
- Cracked vinyl pickets at the rail notch. Winter frost mornings followed by hot afternoons embrittle standard-wall vinyl on these mid-century parcels. The picket cracks right at the rail notch. Heavier-wall profiles survive, and we stock them for Mountain View replacements.
- Gates that bind against the roof drip line. On low-slung Eichler-style ranches, gates are often hung too close to the flat roof’s eave. The gate swings into the drip line or drags on grade. We set the gate swing path before we set the post.
Jerith Service in Mountain View: What Local Conditions Mean for Your Equipment
Mountain View’s Eichler-style homes have flat or low-slope roofs with no attic and no conventional ductwork. The same exposed post-and-beam framing that sets the property line also dictates how roofing and any fence or gate anchor point is tied back to structure. When we set a Jerith post near one of these homes, we’re not just digging a hole: we’re checking where the radiant-slab heating runs are buried, where the flat-roof drainage pools in winter, and where the original post-and-beam framing ends. Near downtown’s Monta Loma and Rex Manor neighborhoods, we regularly work on lots where the original survey pins were never re-established after the carport was enclosed and the roofline extended. That means a fence build that works fine two blocks away in a standard tract home fails here because the boundary anchor is wrong from the start. If the details aren’t right on paper, they won’t be right in the wall. Or in the fence line.
On one low-slung ranch near downtown, a homeowner wanted a new Jerith aluminum fence running under the eave of a shallow flat roof. Our crew re-staked the corners against the survey, hand-augered the posts to avoid the radiant slab and buried utility runs, and set deeper footings on the downhill side where winter drainage pools. Then we racked the Jerith Jamestown panels to grade so the gate swung clean. The run clears the roof drip line and the boundary holds where the original plot plan put it. That’s the kind of work standard crews don’t do in Mountain View, and it’s why we get called back after other installs fail. Need Jerith in Sunnyvale? We handle those jobs too.
Jerith Models & Products We Service in Mountain View
We work with Jerith Jamestown and Regis series aluminum ornamental fences, Jerith Commercial/Industrial grade aluminum with rackable panels, and Jerith vinyl privacy fence panels in Grand Sierra-style picket and privacy profiles. For parts, we use genuine Jerith posts, panels, pickets, and gates wherever the factory still stocks the profile. Where a Jerith part is discontinued or back-ordered, we match color and gauge with quality aftermarket hardware and tell the homeowner which is which. We don’t hide that. On most Mountain View lots, Jerith repair in Loyola and nearby, repair beats replacement. A bent gate or a single racked section is a part swap. A whole run on shifting footings is a re-set, not a patch.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Mountain View
What you’ll pay depends on how much of the existing line is still sound and how deep the footings need to go on your lot. Below are our current Mountain View ranges for the fencing and roofing work tied to these projects, alongside our Home Remodeling – Mountain View services.
| Service | Mountain View Price Range |
|---|---|
| Roof Repair | $400 – $1800 |
| Roof Replacement | $8000 – $20000 |
| Metal Roof Installation | $15000 – $40000 |
| Vinyl Fence Installation | $3500 – $9000 |
| Aluminum Fence Installation | $4000 – $10000 |
Every estimate is free and written line-item, so you see exactly where the money goes. Call (877) 752-3154 and we’ll walk the line with you, measure what’s actually there, and give you a number that won’t change once work starts.
Serving Mountain View, CA — Our Local Coverage Area
We’re a General Contractor – Mountain View team based in the area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Mountain View
Roof repair in Mountain View runs $400 – $1800, while a new Jerith aluminum or vinyl fence runs $3500 – $10000 depending on linear footage, footing depth, and whether we’re matching existing Jerith profiles or starting fresh. On Mountain View lots, the big cost drivers are the ground: Eichler-era radiant slab and buried utility runs mean we hand-auger more than we machine-dig, and shallow flat-roof eave lines often force custom post placement. Call (877) 752-3154 for an exact line-item quote.
No, we’re an independent construction crew that installs and repairs Jerith aluminum and vinyl fencing. We buy the same factory components any licensed contractor can and stand behind the install ourselves. That independence means we have no incentive to push a whole new fence when a section repair does the job.
We service Jerith Jamestown and Regis aluminum ornamental fence, Commercial/Industrial grade rackable aluminum, and Grand Sierra-style vinyl privacy panels. If you’re not sure which line you have, text us a photo of the post cap and a panel, and we’ll identify it before we quote.
Yes, wherever the factory still stocks the profile. We use genuine Jerith posts, panels, pickets, and gates. Where a part is discontinued or back-ordered, we match color and gauge with quality aftermarket hardware and always tell you which is which before we install.
Most single-section repairs and gate resets are one-day jobs. A full fence replacement on a typical Mountain View parcel usually runs two to three days, depending on footing depth and how much old concrete we’re breaking out. Call (877) 752-3154 and we’ll give you a straight timeline for your specific line.
Service Areas Near Mountain View
We serve Mountain View across all four ZIPs, and we handle Jerith work in the surrounding Santa Clara Valley communities as well. Homeowners in Jerith service in Los Altos and Jerith service in Los Altos Hills call us for the same reason Mountain View does: fence and gate work on lots where the boundary line, the roof line, and the drainage don’t behave like standard tract housing. We also handle Jerith work in Palo Alto, Sunnyvale, and Cupertino, where the housing stock and lot configurations create the same anchor-point and slope challenges we see in Mountain View. Mountain View service area coverage includes all of 94035, 94039, 94040, and 94041.
Book Your Jerith Service in Mountain View Today
If your Jerith fence is leaning, your gate is dragging, or your panels are cracking at the rails, call (877) 752-3154 now. We’ll schedule a walk-through, stake the actual boundary, and give you a free written estimate before any work starts.
Written by Noel Trevino, Owner & General Contractor at Moreno Valley Builders, serving Mountain View and the Santa Clara Valley.