Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in San Bruno, CA | Moreno Valley Builders
We provide independent Mr-Glass service across San Bruno, handling shower enclosures, glass railings, storefront doors, and window glass without any manufacturer affiliation, unlike a General Contractor in San Bruno. What sets our Mr-Glass work here apart is that we treat every install as a seismic job because San Bruno sits directly over the San Andreas Fault zone. That means anchoring, template accuracy, and frame condition get checked before any glass goes in. Call (877) 752-3154 and we’ll tell you what you’re actually dealing with.
Why San Bruno Residents Choose Us for Mr-Glass Service
Our crew works exclusively on Mr-Glass systems, so we know the difference between a track problem and a glass problem before we touch the door. Noel Trevino, our owner, spent years fixing work other contractors walked away from: room additions with undersized headers, stucco over green framing, remodels that ignored load paths. That same eye catches Mr-Glass enclosures whose rough openings have racked out of square from decades of settling and small Peninsula tremors. We’re independent, so we never push a full replacement when a hinge swap or custom-cut panel saves the unit. San Bruno homeowners call us because we tell them straight what the repair needs, then we do exactly that. For broader project context, see our Mr-Glass sales & service page.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in San Bruno
- Doors drifting out of square after seismic cycling. Pre-1970s storefront and railing frames in San Bruno loosen at sill and plate attachment points after the small tremors that roll through the Peninsula fault zone. The door starts contacting metal at the edge and the glass wears at the contact point.
- Cloudy frameless shower glass that owners mistake for a tempering defect. Hard recycled Peninsula water leaves mineral film haze on Mr-Glass enclosures, especially in El Camino corridor apartments with shared water systems. It’s crystallization and etching, not bad glass, and it’s removable.
- Chalky, pitted aluminum on storefront and railing components. San Bruno’s marine fog belt keeps salt air on metal all year. Mr-Glass aluminum cladding and fasteners corrode, and dissimilar metal contact creates galvanic pitting at the sill.
- Stock slider kits binding in mid-century homes. Stucco-and-wood-frame houses from the 1940s through 1970s have walls racked by settling and seismic strain. Stock Mr-Glass sliders bind in openings that are no longer square, so the real fix is templating a custom-cut track, not forcing in a new panel.
- Glass panels contacting metal at the edge after anchor loosening. This is the warning sign we look for most in San Bruno. When a Mr-Glass railing or enclosure anchor loosens, the glass shifts until it touches frame metal, and the edge polish starts to spall.
If the details aren’t right on paper, they won’t be right in the wall. That applies to glass anchors as much as framing.
Mr-Glass Service in San Bruno: What Local Conditions Mean for Your Equipment
San Bruno sits over the San Andreas Fault zone near its 1906 rupture trace, and the city’s hillside and flatland neighborhoods carry some of the strictest seismic retrofit and soft-story requirements in San Mateo County. For Mr-Glass owners, that changes what a “simple” glass repair looks like. Glass installs that touch framing or exterior walls get pulled into seismic and permit review that neighboring Mr-Glass service in Millbrae jobs often skip. The September 2010 PG&E gas pipeline explosion in the Crestmoor neighborhood only deepened that scrutiny; Crestmoor rebuilds now move through heightened utility and permitting checks, and any glass work tied to an exterior wall or railing system inherits that same review. What this means in practice: a Mr-Glass storefront door replacement in San Bruno needs anchor detail drawings that nobody asks for in South San Francisco. We prepare those details as standard practice because we know the reviewer will look for them.
Mr-Glass Models & Products We Service in San Bruno
We work on Mr-Glass frameless sliding shower door systems, including standard single- and double-panel bypass kits, 3/8-inch and 1/2-inch tempered frameless enclosures, aluminum-framed storefront and commercial door glass packages, and interior glass railing and panel systems. For proprietary hardware such as track profiles, rollers, hinges, and handles, we source OEM Mr-Glass replacements because aftermarket look-alikes skip the exact glass thickness and edge-polish spec. For glass itself, we template and cut tempered or laminated panels to the opening rather than pulling a full new enclosure. We stock common OEM track profiles and roller sets locally so a San Bruno repair doesn’t wait on a warehouse across the Bay.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in San Bruno
What you pay depends on whether we’re repairing existing hardware, replacing a single panel, or installing a full enclosure. San Bruno seismic requirements can add an engineering or permit step on railing and storefront work, which we quote separately and itemize on the estimate. Here are the common line items for Mr-Glass shower and glass work:
| Service | Price Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
Every estimate is free and written. Call (877) 752-3154 and we’ll walk the opening with you, check the frame, and give you a number before any work is scheduled.
Serving San Bruno, CA — Our Local Coverage Area
We’re based in the San Bruno area and know this community well, with Mr-Glass repair in Pacifica also available nearby. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in San Bruno
It’s almost always a frame problem. San Bruno homes settle and rack from seismic strain, and the rough opening goes out of square. The Mr-Glass track then binds and the door drifts into the fixed panel. We confirm by checking square and anchor tightness, then decide whether a templated track or re-set hardware fixes it. Call (877) 752-3154 for an exact diagnosis, free.
Yes, frequently. Because San Bruno sits over the San Andreas Fault zone and the Crestmoor 2010 pipeline disaster reshaped how the city scrutinizes utility penetrations and rebuild permits, glass that touches framing or exterior walls can get pulled into seismic and permit review. We coordinate anchor layouts with the framing detail so the enclosure passes the city’s bracing review without a re-inspection.
That’s salt-air corrosion from San Bruno’s marine fog belt. Mr-Glass aluminum cladding and fasteners chalk and pit from constant moisture and salt exposure, and galvanic corrosion develops where dissimilar metals touch at the sill. The repair is frame and fastener replacement, not glass work. Call (877) 752-3154 and we’ll assess what needs to come out.
No. It’s mineral film from hard recycled Peninsula water, common in El Camino corridor apartments with shared systems. The haze is crystallization and etching on the surface, not a manufacturing defect. We can assess whether it’s cleanable or if the glass needs replacement. Call (877) 752-3154 for a straight answer.
Yes, in most cases. We template and cut tempered or laminated panels to the existing opening and re-use the OEM Mr-Glass hardware when it’s still square and tight. You pay for glass and labor, not a full enclosure. Call (877) 752-3154 and we’ll tell you if your frame is worth keeping.
Service Areas Near San Bruno
Our Mr-Glass service covers San Bruno and the surrounding Peninsula, including Millbrae, South San Francisco, Burlingame, San Mateo, and Daly City. We also serve Mr-Glass service in Montara and Mr-Glass service in South San Francisco. For full coverage details, see our San Bruno service area page.
Book Your Mr-Glass Service in San Bruno Today
Call (877) 752-3154 to schedule your free estimate. We’ll check the frame, measure the opening, and give you a written number before any glass is ordered. Noel Trevino and our Mr-Glass crew know San Bruno’s seismic and marine conditions, and we build every install to survive both, just as we do with Mr-Glass service in Brisbane.
Written by Noel Trevino, Owner at Moreno Valley Builders, serving San Bruno since day one.