Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Construction in Claremont, CA | Moreno Valley Builders
We install and service Therma-Tru in Montclair and across Claremont as an independent construction crew, not a factory-authorized agent. What makes our work different here: we know how Therma-Tru slabs actually fail in Claremont’s period housing stock, from foothill UV damage on south-facing entries to out-of-square rough openings in 1910s Craftsman frames. We buy, fit, flash, and finish Fiber-Classic, Smooth-Star, and Classic-Craft doors every month in the 91711. Call (877) 752-3154 for a free estimate.
Why Claremont Residents Choose Us for Therma-Tru Service
Therma-Tru doors are well-built, but Claremont’s housing stock tests them in specific ways, and that’s where our Therma-Tru service in La Verne experience pays off. Noel Trevino has spent nearly three decades building and renovating homes across the Inland Empire, and the fundamentals he learned at Riverside City College, framing, concrete, mechanical systems, hold up when a door opening turns out to be 3/4″ out of square. We’ve re-hung more Therma-Tru slabs in early-1900s homes near the Village than in any other setting. If the details aren’t right on paper, they won’t be right in the wall.
We use Therma-Tru OEM replacement slabs, sweeps, hinges, and multi-point hardware whenever the frame is sound. When the frame is racked or the sill pan was never flashed, we replace the full prehung unit. And because we’re a full-scope general contractor, not a door-only specialist, we can open up the wall, fix the framing, re-flash, and finish the trim without you juggling three different subs. Therma-Tru sales & service is one part of what we do, but it’s a part we do with real depth. Claremont service area work is our home turf.
Styles & brands we work with
Common Therma-Tru Construction Problems We Solve in Claremont
- Chalking and oxidized fiberglass skins. South- and west-facing entries in Claremont get hammered by foothill sun from May through October. Pre-2000 Smooth-Star and Fiber-Classic slabs that were never recoated oxidize fast, leaving a chalky film and faded color. We strip, prep, and refinish or replace the slab when the oxidation has gone too deep.
- Doors that whistle and won’t seal during Santa Ana season. Original builder-grade sweeps and weatherstrip bake hard in the dry heat, then pack with dust blown from the foothills. The door stops sealing and starts whistling. We fit new Therma-Tru OEM sweeps and compression weatherstrip, adjusted to the actual gap.
- Binding at the strike and dragging on the sill. On Craftsman and period-revival homes near the Village, Therma-Tru slabs set into original rough openings that have moved over a century. The door binds at the strike and drags the threshold within a season. We re-shim, re-hang, and if the frame’s too far gone, set a new prehung unit square in the same opening.
- Rotted sill pans and water-stained thresholds. Common on older retrofits where a prior owner swapped a door without flashining the opening. We see this all over Claremont’s 1950s and 60s ranch tracts on the south side. We cut out the rot, re-flash the sill with quality aftermarket pan material, and re-set the door so water actually sheds away from the house.
- Failed multi-point hardware and sagging hinges. Therma-Tru multi-point locks are reliable, but heavy fiberglass slabs on old frames can wear hinges and throw off the alignment. We replace with OEM hardware and adjust the hinge mortises rather than forcing the door to work against itself.
Therma-Tru Service in Claremont: What Local Conditions Mean for Your Equipment
Claremont’s preserved Village and the streets around the Claremont Colleges carry historic-sensitive review expectations that newer inland tract subdivisions never face. When a homeowner wants to change an exterior door on a Craftsman or period-revival home here, the review often looks hard at panel proportions, divided-light patterns, and trim profiles. That means a Therma-Tru replacement slab can’t just be any door that fits; it has to look like it belongs on a 1912 bungalow. On a 1910s Craftsman near the Claremont Village, our crew was called out for a Therma-Tru Fiber-Classic entry that wouldn’t latch and dragged the threshold. We pulled the slab, found the original rough opening out of square and the sill pan never flashed, rebuilt and shimmed the frame, re-flashed the sill, and hung a new prehung unit with a matched trim reveal that satisfied the preservation-minded review. The door now closes clean and sheds water the way the original opening never did. That’s the difference between a door installer and a crew that understands what Claremont asks of a door.
Therma-Tru Models & Products We Service in Claremont
We install and service the full Therma-Tru residential lineup: Fiber-Classic entry doors, Smooth-Star fiberglass doors, Classic-Craft series doors, and Therma-Tru repair in Upland and patio and sidelite systems. For Claremont turnaround, we keep common OEM sweeps, weatherstrip, hinges, and multi-point hardware on hand. When a slab needs replacing, we order OEM Therma-Tru slabs configured to your rough opening. Where the OEM part isn’t the right fit for an old, out-of-square opening, we’ll tell you before we order anything. No surprises.
See the difference
Before
After
Before
After
Before
AfterTherma-Tru Service Pricing in Claremont
Door and window work in Claremont routes through our general contracting pricing, and the numbers below reflect what we typically see in the 91711. Every job gets a written line-item quote before we start, and the price doesn’t change once the work begins.
| Service | Typical Range in Claremont |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Home Addition | $45,000 – $130,000 |
| Roof Repair | $400 – $1,800 |
What drives the cost on a Therma-Tru door job here: whether the rough opening is square, whether the sill pan and flashing were done right the first time, and whether historic review requires custom trim or divided-light detailing. A simple re-hang is a fraction of a full prehung replacement. Call (877) 752-3154 and we’ll give you an honest read on which path makes sense for your house.
Serving Claremont, CA — Our Local Coverage Area
We’re based in the Claremont area and offer Therma-Tru service in San Antonio Heights and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Therma-Tru Construction in Claremont
Yes, and this is exactly the work we do most in Claremont. The key is matching panel proportions, divided-light patterns, and trim profiles to the original architecture, then doing the flashing and sill work so the new door performs as well as it looks. We’ve done this on 1910s Craftsman homes within blocks of the Village, with results that cleared preservation-minded review without a fight. Call (877) 752-3154 for a walkthrough of your door and what it needs.
Summer heat and the dry Santa Ana pattern cause the frame, slab, and rough opening to move. In older Claremont homes, the original rough opening was rarely square to begin with, so even a small seasonal shift is enough to make a Therma-Tru slab bind at the strike or drag the sill. The fix is usually re-shimming and re-hanging the frame, and if the frame has moved too far, a new prehung unit set square. Call (877) 752-3154 for an exact diagnosis and quote.
Yes, and we treat it as standard practice. Claremont’s foothill exposure means wildfire defense matters, especially on the north and west edges of the city. We specify fire-rated Therma-Tru configurations where they’re appropriate, and we pay attention to ember-resistant detailing: sealed thresholds, tight weatherstrip, and proper flashing. Call (877) 752-3154 to talk through your home’s specific exposure.
Window replacement in Claremont typically runs $4,500 to $15,000, and impact-rated window installation runs $8,000 to $25,000. Therma-Tru patio door work lands within those ranges depending on size, finish, and how much frame repair the existing opening needs. Every estimate is free and itemized. Call (877) 752-3154 for a specific number.
Yes. South Claremont’s ranch tracts have consistent trim profiles, and we match them rather than forcing a generic look. More important: we flash the new opening correctly, which is where previous retrofits in that part of Claremont so often failed. Call (877) 752-3154 and we’ll walk the opening with you before any work is scheduled.
Service Areas Near Claremont
We serve Claremont (91711) and the surrounding communities. Our crews regularly work in Moreno Valley, Loma Linda, Grand Terrace, Highgrove, and March Air Force Base. For Therma-Tru work south of the foothills, see Therma-Tru service in Foothill Ranch or Therma-Tru service in Coto De Caza.
Book Your Therma-Tru Service in Claremont Today
Whether it’s a re-hang, a re-flash, a full prehung replacement, or a new door on a new opening, we’ll give you an honest assessment and a fixed price before work starts. Estimates are free. Call (877) 752-3154 to schedule yours.
Written by Noel Trevino, Owner & General Contractor at Moreno Valley Builders, serving Claremont and the Inland Empire.