Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Cypress, CA | Moreno Valley Builders
We provide independent Unilock paver and wall construction across Cypress, handling the part the manufacturer can’t: base design, grading, and drainage for this city’s clay-heavy, near-flat lots. Unilock makes an excellent paver. But in Cypress, a paver is only as good as what’s underneath it. Most failures we see here aren’t paver defects at all. They’re drainage and base problems, and that’s where a general contractor with local ground knowledge makes the difference. Call (877) 752-3154 for a free estimate on any Unilock project in Cypress.
Why Cypress Residents Choose Us for Unilock Service
We’re a Cypress General Contractor, not a manufacturer program dealer. That matters here. When we install Unilock Brussels Block or Beacon Hill Flagstone, we’re also the people who understand the existing slab, the stem wall, the roof discharge, and the clay subgrade that all interact with it. The paver is one layer of the system. Around here, it’s rarely the layer that fails first.
Noel Trevino, our owner and general contractor, grew up in Sunnymead Ranch and has spent close to three decades building and renovating homes across the Inland Empire and north Orange County. He picked up construction technology at Riverside City College, where the framing and concrete coursework gave him a foundation that held up better than a lot of what he later had to tear out and redo. He’s the contractor people call when a project has gone sideways, and a paver job that ponds water against a stem wall is exactly the kind of thing we get called to fix right the second time. If the details aren’t right on paper, they won’t be right in the wall. Or in the base.
Styles & brands we work with
Common Unilock Construction Problems We Solve in Cypress
- Post-rain ponding at the paver field edge. On Cypress’s near-flat lots, a patio or walkway that meets the house without enough slope to drain will hold water after a winter storm. It looks like a paver problem. It’s a grading problem, and we re-set the field with correct fall and a drainage path.
- Lateral creep and joint sand washout in Brussels Block and Town Hall fields. When the aggregate base is undersized for expansive clay subgrade that swells in wet winters, the field drifts and the joints open. We rebuild the base to spec for clay, not for a generic Southern California standard.
- Efflorescence and silt staining on Beacon Hill Flagstone. When storm runoff from a roof or addition discharges across the pavers with no gutter or channel drain, the surface gets streaked and crusted. We add drainage before we address the cosmetic staining, or the problem returns.
- Edge restraint failure along driveways. Where an existing 1950s – 70s tract slab or stem wall transitions to new flexible pavement, the two move differently in clay. Without a proper restraint detail, the pavers separate and the edge opens up. We tie new restraint into the existing concrete where it’s sound.
- Driveway slabs heaved where clay meets the garage stem wall. This is a Cypress classic. The original concrete cracks and lifts, rain sheets toward the house, and paver overlay won’t fix it. We tear out the slab, re-grade, and rebuild the section properly before setting Unilock units.
Unilock Service in Cypress: What Local Conditions Mean for Your Equipment
Cypress is essentially built out. It’s a master-planned Orange County suburb sitting on the clay-heavy, expansive soils and high water table of the old Los Alamitos/Anaheim plain, and almost no Unilock work here is new tract hardscape. Our Garden Grove Unilock service neighbors see similar conditions: we mostly replace or overlay aging concrete driveways and patios on 1950s – 1970s ranch lots that were graded years ago, often before current drainage expectations existed. That changes the design problem entirely. You’re not starting with a clean pad. You’re working around an old slab, a stem wall that’s been moving for sixty years, and lot grading that drains toward the house because the original builder never anticipated a second-story addition or an ADU changing the roof discharge pattern. In a city like Cypress, re-grading to the street or a dry well is the real design problem. The paver pattern is the easy part. Getting water away from the foundation on a near-flat lot is what decides whether the job lasts.
Unilock Models & Products We Service in Cypress
We install and service the full Unilock lineup relevant to Cypress residential work, including Brussels Block, Beacon Hill Flagstone, the Town Hall paver series, and the Pisa2 retaining wall system. We use genuine Unilock units, edge restraint, and polymeric joint sand for anything visible or structural, and quality compatible base aggregate and geotextile beneath. Where an existing field is sound but uneven or washed out, we re-level, re-sand, and re-set rather than tear out. We only recommend full replacement when base failure or drainage is systemic, because replacing good pavers over a bad base just buys you the same problem with newer material. Our Unilock sales & service approach is built on that judgment call: what actually needs to be replaced versus what needs to be re-graded, drained, and re-set.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Cypress
What you pay depends mostly on what’s underneath the pavers and what the existing grading is doing. A clean overlay on a sound slab is one price. A tear-out, re-grade, new aggregate base, drainage, and edge restraint is another. Here’s the range we typically quote for Cypress work:
| Scope | Cypress Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
Every estimate is free and written as a line-item quote, so you can see exactly what’s base work, what’s drainage, and what’s the Unilock product itself. Call (877) 752-3154 to schedule yours.
Serving Cypress, CA — Our Local Coverage Area
We’re based in the Cypress area and also provide Unilock service in Buena Park, so we know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Cypress
Because the lot is nearly flat and the field was likely set without enough slope to shed water. In Cypress, the original 1950s – 70s grading often drains toward the house, not away from it. The fix is re-grading the field to fall toward a swale or dry well, not replacing the pavers. Call (877) 752-3154 and we’ll walk the site and tell you what’s actually happening.
Sometimes, yes, if the slab is structurally sound and we can still achieve positive drainage. But if the clay subgrade has heaved the slab at the stem wall, an overlay won’t hold. We’ll tell you straight which situation you have before you spend a dollar.
Like our Unilock in Stanton projects, Brussels Block handles Cypress clay well when the base is built for it: geotextile over the subgrade, compacted aggregate of sufficient depth, and proper edge restraint. The paver choice matters less than the base, but Brussels Block’s unit size and interlock make it a solid driveway paver in this soil.
Yes. Anything visible or structural is genuine Unilock product. Beneath the pavers, we use quality compatible aggregate and geotextile. The restraint and polymeric sand are where clay movement shows up first, so we don’t cut corners there.
A new roofline changes where storm water discharges. If your patio currently drains fine, an addition can turn it into a ponding site overnight. We account for that in addition design, adding channel drains or re-grading the patio edge so the new structure doesn’t wreck the existing hardscape. Call (877) 752-3154 for an exact quote, and we’ll review your addition plans with the hardscape in mind.
Service Areas Near Cypress
We serve Cypress and the surrounding Orange County and Inland Empire communities, including Moreno Valley, Grand Terrace, Loma Linda, March Air Force Base, and Highgrove. For Unilock work in nearby cities, see our Unilock service in La Palma and Unilock service in Yucca Valley pages, or our full Cypress service area coverage.
Book Your Unilock Service in Cypress Today
One contractor. Every phase. From base design and grading to the final paver edge, we manage it all. Call (877) 752-3154 to schedule your free Unilock estimate in Cypress.
Written by Noel Trevino, Owner and General Contractor at Moreno Valley Builders, serving Cypress and the Inland Empire.