Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Silver Lakes, CA | Moreno Valley Builders
Unilock construction service in Silver Lakes means paver driveways, patios, and retaining walls built for the high desert, and we provide it across the entire 92342 zip code. We’re an independent installer, not a manufacturer-authorized shop, so we specify the Unilock system that fits your specific lot rather than what a dealer’s inventory sheet pushes. The difference that matters here: we know how Brussels Block and U-Cara systems behave when the wind starts blowing sand across the open desert side of town, and we quote accordingly. Call (877) 752-3154 for a free estimate on any Unilock paver project in Silver Lakes.
Why Silver Lakes Residents Choose Us for Unilock Service
Noel Trevino, owner at Moreno Valley Builders, grew up in Sunnymead Ranch and spent nearly three decades building across the Inland Empire, including stints framing and running concrete on high desert lots where the weather actually punishes the work. That background matters when you’re laying pavers in Silver Lakes, because a paver field on a graded desert cut behaves nothing like one on a coastal slab. Our crews set, re-set, and repair Unilock systems here weekly, and we keep genuine Unilock units, matching edge restraint, and desert-spec polymeric sand on hand for fast turnaround. We also provide Unilock service in Victorville and surrounding high desert communities. We’re also a full-scope general contractor, which means the paver work gets coordinated with drainage, stucco repairs, and any other exterior scope without you juggling a second crew. One contractor, every phase, from permits to punch list.
Styles & brands we work with
Common Unilock Construction Problems We Solve in Silver Lakes
Here are the five failure patterns we see most often in this community, and the local reason behind each one:
- Wind-scoured paver edges: Sand-laden wind off the open desert grinds the chamfered edges of Unilock Brussels Block and blasts the polymeric sand out of the joints years early. Pavers start rocking, then they drift. We re-set the courses, re-edge with proper restraint, and re-sand with a poly blend spec’d for wind exposure.
- Freeze-thaw heave: Winter nights in Silver Lakes dip below freezing, and any patio or driveway installed over a shallow, poorly compacted base on graded desert fill will heave. We see it most on cuts where the original builder never re-engineered the subgrade. The fix is pulling the field, re-compacting in lifts, and re-setting the same Unilock units.
- Efflorescence on lake-side pavers: Properties near the man-made lakes or on heavily irrigated landscaping deal with moisture wicking up through Unilock Town Hall and Beacon Hill pavers set too tight to drain. The result is white mineral staining and moss along shaded north edges. We correct the slope and open the joints where the moisture needs somewhere to go.
- Leaning U-Cara retaining walls: U-Cara wall block fails when the geogrid ties and backfill weren’t compacted in lifts behind it. On exposed west-facing slopes, wind-driven sand adds lateral pressure, and the wall leans. We rebuild the wall section, installing proper drainage and grid ties.
- Settled driveway edges: Driveways in Silver Lakes often settle at the outer edges where base aggregate was feathered too thin. The pavers dip, the border pulls away, and the whole field loses its lock. That’s a localized re-set job, not a full tear-out.
Unilock Service in Silver Lakes: What Local Conditions Mean for Your Equipment
Silver Lakes is a planned lake-and-golf community carved out of the Mojave high desert along the I-15 corridor between Barstow and Victorville, near our Unilock repair in Spring Valley Lake service area. That shapes every paver job here in a way it doesn’t in Hesperia or Apple Valley. A house on the open west edge of the development gets sand-blasted against its stucco and window seals, and that same wind works the joints of a paver patio like a wire brush. Walk to the other side of the development, near the golf course and lakes, and the opposite problem governs: irrigation overspray and lake-adjacent moisture keep the ground damp enough to wick up through pavers and rot fascia boards. We read which side of the development a house sits on before we quote exterior work, because the prep for a desert-facing lot on the west edge isn’t the same as the prep for a shaded lake-side lot. If the details aren’t right on paper, they won’t be right in the wall. Or under the paver.
Unilock Models & Products We Service in Silver Lakes
We install and repair the Unilock lines most common in Silver Lakes: Brussels Block for driveways and patios, Beacon Hill for a tumbled, settled look, Town Hall for a clean formal field, and U-Cara for retaining walls and seat walls. We build on genuine Unilock units with their matching edge restraints and joint sand, and we use quality aftermarket polymeric sand and base aggregate where it outperforms in desert conditions. If a field only shows localized settlement or sand loss, we re-set and re-sand those courses rather than tear out the whole installation. That’s the honest repair-versus-replace call, and it saves Silver Lakes homeowners thousands.
You can read more about our broader Unilock sales & service capability, including how we specify across model lines for different site conditions.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Silver Lakes
Pricing for Unilock work in Silver Lakes tracks three scopes: the paver field size, the condition of the base, and whether the HOA design review adds time to the schedule. Here are the ranges we quote most often for this market:
| Scope | Typical Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Sealing | $250 – $700 |
Every free estimate includes an on-site look at your base and drainage, a written line-item scope, and a material list. Call (877) 752-3154 for exact numbers on your Silver Lakes project.
Serving Silver Lakes, CA — Our Local Coverage Area
We’re based in the Silver Lakes area and know this community well, and we also handle Unilock in Adelanto. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Silver Lakes
Yes. Silver Lakes operates as a master-planned community, so the HOA design review board must sign off on paver color and pattern before a single pallet lands on your lot. We handle that paperwork for you and sequence the haul to arrive right after sign-off, because the approval calendar, not the install, is usually the long pole. Call (877) 752-3154 and we’ll walk you through the submittal.
Windblown sand from the open desert acts like a low-grade abrasive on the joints. The sand scours the polysand between Brussels Block and other Unilock lines, eroding it years early and letting individual pavers rock. We re-sand with a polymeric blend formulated for high wind exposure, which resists the scour better than standard bagged joint sand.
Usually, yes. If the base was compacted properly and only localized courses have failed, we pull the affected area, re-compact and re-grade the base, re-set the same genuine Unilock units, and re-sand with fresh edge restraint. We only recommend a full tear-out when the subgrade itself has failed. Estimates are free at (877) 752-3154.
They do. Lake-side and heavily irrigated lots stay damp, so we open the joint spacing and increase the base drainage slope to move water away from the paver field. Desert-facing lots on the west edge get the opposite treatment: tighter joints and a polymer sand that stands up to wind scour. The same specs apply for Unilock in Mountain View Acres. Your lot position in Silver Lakes changes the spec.
No. Walls over three feet on graded desert fill need an engineered design, and even smaller U-Cara walls on exposed slopes benefit from geogrid ties and proper drainage. We won’t build a retaining wall in Silver Lakes without understanding what the backfill is doing behind it, because a leaning wall is the one repair nobody wants to pay for twice.
Service Areas Near Silver Lakes
We serve Silver Lakes and the surrounding high desert corridor, including Silver Lakes service area coverage across 92342. Our crews also run paver and hardscape jobs in Moreno Valley, March Air Force Base, Loma Linda, Highgrove, Mead Valley, and Grand Terrace, plus Unilock service in Indio and Unilock service in San Juan Bautista for clients with multiple properties.
Book Your Unilock Service in Silver Lakes Today
Whether it’s a new paver driveway off the I-15 or a re-set of a sand-blasted patio on the west edge, we’ll give you a straight answer and a written line-item quote. Call (877) 752-3154 to schedule your free on-site estimate in Silver Lakes.
Written by Noel Trevino, Owner and General Contractor at Moreno Valley Builders, serving Silver Lakes and the high desert corridor for over 25 years.