Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Cabinet Installation Cost in Moreno Valley?
Cabinet installation in Moreno Valley typically runs $4,000 to $13,000 for a full kitchen, including removal of old cabinets and hang, level, and shim work on the new set. Stock cabinets at the low end land near $4,000, semi-custom lines like KraftMaid and Wellborn push toward $9,000 – $13,000, and a large kitchen with islands, pantry runs, and upgraded hardware sits at the top of that range. Most Moreno Valley homeowners we quote land around $7,500 for a mid-grade semi-custom job.
That figure is installation plus standard cabinet cost, not the whole remodel. If you’re also replacing countertops, a backsplash, or lighting, the total project climbs. A full kitchen remodel here runs $14,000 – $45,000, and cabinets are usually the single largest line item inside it.
Cabinet Installation Cost Breakdown (2026)
Here’s how the $4,000 – $13,000 range actually breaks down for a Moreno Valley kitchen. Prices reflect 2026 market rates for labor and materials in Riverside County.
| Line Item | Typical Cost Range | Notes |
|---|---|---|
| Stock cabinets (10×10 kitchen) | $2,200 – $4,500 | Box-store lines, limited sizes and finishes |
| Semi-custom cabinets (10×10 kitchen) | $4,500 – $8,500 | KraftMaid, Wellborn; real size and door-style options |
| Custom cabinetry | $9,000 – $18,000+ | Built to the inch; longer lead times |
| Removal and haul-away of old cabinets | $250 – $600 | Includes disposal |
| Installation labor (hang, level, shim, secure) | $1,200 – $3,500 | Depends on linear feet and wall condition |
| Cabinet hardware (pulls, knobs) | $150 – $800 | Brand and finish drive the spread |
| Toe kick, filler, and trim | $100 – $400 | |
| Electrical or plumbing relocation | $300 – $1,500 | Only if you move a sink, range, or outlet |
| Cabinet refacing (alternative to new) | $1,800 – $5,500 | Keeps existing boxes, replaces doors and veneer |
What pushes the number up: custom sizes, soft-close drawers on every box, a pantry wall, a kitchen island, or a layout change that moves plumbing. What pulls it down: keeping the existing footprint, choosing semi-custom over custom, and skipping layout changes so no trades need to re-route a drain or a circuit. A kitchen island installation, if you add one, is a separate $3,000 – $10,000 on top of the cabinet line.
What Affects Cabinet Installation Pricing in Moreno Valley
Two kitchens of the same square footage can quote $4,000 apart. Here’s what actually moves the number, and some of it is specific to how homes are built here.
- Cabinet grade. Stock, semi-custom, and custom are three different price worlds. Stock boxes come in set widths, so you fill gaps with filler strips. Semi-custom (KraftMaid and Wellborn are the two lines we specify most) gives you real size options and a wide range of door styles and finishes, which is why most Moreno Valley remodel budgets land in the $7,000 – $10,000 zone. Custom is built to the inch and priced accordingly.
- Wall and floor condition. A lot of Moreno Valley homes were built in the 1980s and 1990s in tracts like Sunnymead Ranch and TownGate. After 30 years, walls settle and floors go out of level. We shim and scribe to compensate, and that leveling time is real labor. A house with a square, plumb kitchen installs faster than one where we’re chasing a 3/4-inch slope across an eight-foot run.
- Layout changes. Keeping the sink and range where they are keeps plumbing and electrical untouched. Moving them means opening walls, re-routing a drain, and running new circuits. That’s the single fastest way to add $1,000 or more.
- Islands and peninsulas. An island adds cabinet boxes, a countertop, and usually electrical for outlets. Add $3,000 – $10,000 if one is going in during the same project.
- Door style and finish. A painted shaker with a simple profile costs less than a glazed or stained finish on a raised-panel door. Refacing versus new faces can shift things too.
- Countertop and backsplash timing. Cabinets have to go in and be level before the countertop gets templated, and the backsplash goes after the counter. Sequencing mistakes cost money. We schedule the whole chain so nobody’s waiting on anybody.
How to Save on Cabinet Installation
You don’t have to spend the top of the range to get a kitchen that holds up. A few moves that actually work:
- Keep the sink and range where they sit. No plumbing or electrical relocation means no surprises behind the wall. This one decision often saves $500 – $1,500.
- Put semi-custom cabinets where they earn their price. Spend on the boxes you touch every day (base cabinets, drawers) and use stock sizes for less-visible runs. Mixed sourcing is fine when one contractor manages it.
- Choose a standard depth and height. Non-standard depths trigger custom pricing. Standard 24-inch base and 12-inch upper depths stay in the semi-custom bracket.
- Bundle the whole scope. Cabinet installation, countertop installation, and backsplash installation done under one contract lets us sequence trades and avoid the “countertop guy is waiting on the cabinet guy” delays that pile up when you hire separately.
- Get a free, itemized estimate. We quote the same scope every homeowner sees, line by line, so you can compare apples to apples. Call (877) 752-3154 and we’ll walk your kitchen and put numbers on paper.
Which Cabinet Brands Are Worth It in Moreno Valley?
Brand matters less than fit and grade, but a few lines earn their place. We specify KraftMaid and Wellborn for semi-custom work because both offer a wide door-style range, real size flexibility, and finishes that hold up in a dry inland climate. If your kitchen also needs countertops, we pair cabinetry with Cambria or Caesarstone quartz; the countertop installation is a separate $2,000 – $6,500, and both brands template cleanly against a level cabinet run.
Material choices should follow how you cook and clean, not a showroom’s convenience. If you’re replacing a sink while the cabinets are out, Kohler, Moen, Delta, and Grohe are all on our plumbing bench, with American Standard, Toto, Blanco, and Sterling rounding out the lineup for any budget tier. We manage the trades so you don’t have to, which means the cabinet installer, the countertop fabricator, and the plumber all work from one schedule instead of three.
If your project grows past cabinets, the same crew handles Cabinet Installation in Moreno Valley and the rest of the interior under one permit and one point of contact. And since we’re a full-scope general contractor, a cabinet job can roll into a larger kitchen remodel without you hiring a second company. From permits to punch list, one contractor. Every phase.
FAQs – Cabinet Installation Cost
How much does cabinet installation cost in Moreno Valley?
Expect $4,000 to $13,000 for a full kitchen in Moreno Valley, including removal of the old cabinets and installation labor. Stock cabinets run near the bottom, semi-custom lines like KraftMaid and Wellborn sit in the middle, and a large kitchen with an island lands at the top. Call (877) 752-3154 for an exact quote; estimates are free.
Is it cheaper to reface or replace cabinets?
Refacing usually runs $1,800 to $5,500, versus $4,000 – $13,000 for new cabinets. Refacing keeps the existing boxes and replaces doors, drawer fronts, and veneer. It works when the boxes are solid and the layout is right. If the frames are sagging, the layout is cramped, or you want different sizes, new cabinets make more sense. We’ll tell you straight which one fits your kitchen.
How long does cabinet installation take?
A standard kitchen takes 2 to 4 days for removal and installation, then countertops template after the cabinets are set and level. Semi-custom cabinets have a lead time that can stretch to several weeks depending on the line and finish. We give you a schedule up front and hold to it. Call (877) 752-3154 to get your timeframe in writing.
Do I need a permit for cabinet installation in Moreno Valley?
Cabinet replacement alone usually does not require a permit, but moving plumbing, electrical, or walls within a kitchen does. Riverside County and City of Moreno Valley rules apply, and the trigger is the trade work, not the cabinets themselves. We handle permitting as part of the project so nothing gets installed that later fails inspection. Call (877) 752-3154 and we’ll tell you exactly what your scope needs.
Can you install cabinets and countertops together?
Yes, and it’s usually faster and cheaper than hiring separately. Countertop installation runs $2,000 to $6,500 and backsplash installation $800 – $2,500, and both depend on level cabinets. One contractor coordinating the sequence avoids the gap where your old counter is off but the new one isn’t templated yet. Call (877) 752-3154 for a combined estimate.
Plan Your Cabinet Project Around Real Numbers
Cabinets are the backbone of a kitchen, and the $4,000 – $13,000 range tells you where your project likely lands. The specific number comes down to the cabinet grade you choose, whether the layout stays put, and how many trades get pulled in around it. We quote line by line so you can see what’s doing the work in the total.
Moreno Valley Builders is a licensed general contractor covering the full project lifecycle from permitting through final inspection. With access to 50+ established brands across cabinetry, countertops, plumbing, and the rest of the home, your material choices follow your budget and how you want the kitchen to work. Your project. Your material choices. Call (877) 752-3154 for a free estimate, or start at our home page to see the full range of what we handle.
Pricing reflects the Moreno Valley market as of 2026. Moreno Valley Builders offers free estimates – call (877) 752-3154.
What Our Customers Say
"Allowances in the contract were realistic rather than artificially low to make the bid look good."
— Bryce Miller"Quality construction and a professional operation. Communication was strongest at the site meetings, and slower by email in between."
— Brianna Bryant"The foundation survey came back dead on. Everything downstream of that being square is the reason the rest of the build went smoothly."
— Gabriela Reyes