Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable General Contractor Across Palm Springs
A general contractor in Palm Springs coordinates every trade, permit, and material on your project so you’re not stuck running between roofing crews, window installers, and the city’s planning desk. Most full-scale renovations here run $45,000 to $130,000, while a roof replacement on the city’s flat and low-slope mid-century homes typically lands between $8,000 and $20,000. We work across 92262, 92263, 92264, and 92292, and we know the quirks of this housing stock better than an out-of-town outfit ever could. That matters when a monsoon downpour hits a 1960s post-and-beam roof. Noel Trevino leads our team, and you can reach us directly at (877) 752-3154 for a free estimate.
Why Moreno Valley Builders Is Palm Springs’s Preferred General Contractor Company
Palm Springs homeowners keep calling us because we understand what this city’s architecture demands. The mid-century modern homes that define neighborhoods like the Movie Colony, Vista Las Palmas, and Deepwell Estates are gorgeous but unforgiving when it comes to flat roofs, post-and-beam framing, and aging stucco. We’ve spent years working on these specific structures, and our crews show up knowing what the city’s design review boards will ask before we even pull the permit. That saves you weeks of back-and-forth.
Being a General Contractor with access to 50+ material brands means we’re not locked into one supplier’s catalog. When a Palm Springs customer needs impact-rated windows that match original aluminum sightlines on a 1962 Kaufmann-style home, we specify from CWS or CGI because their systems carry the wind-load ratings this valley needs without looking like a modern add-on. Noel Trevino and the team work this way on every job: specified for the desert, documented for your records, and priced line by line before we start. Homeowners in Palm Springs consistently tell us the difference is in the paperwork: permits pulled, inspections signed off, and photos of every layer before it’s covered.
Styles & brands we work with
Remodeling Contractor in Palm Springs
Remodeling Contractor work in Palm Springs almost always means working inside a protected architectural frame. You’re not just replacing a kitchen; you’re doing it in a home where the city may require design review before you touch a wall that faces the street. Our team handles that process from the first drawing to the final inspection, and we’ve done enough of these to know which material substitutions will pass on the first submittal. A typical kitchen remodel in Palm Springs runs $14,000 to $45,000 depending on cabinetry, countertops, and whether you’re restoring the mid-century character or intentionally departing from it.
Mid-Century Interior Work
Older Palm Springs homes have post-and-beam ceilings, clerestory windows, and exposed concrete block that you won’t find in newer tract housing. Remodeling around those features takes a different skill set than framing a standard drywall box. We plan cabinet runs, plumbing stack locations, and lighting layouts around the structure instead of fighting it.
Addition Planning for Aging Homes
A room addition on a 1950s Palm Springs home usually means matching rooflines, stucco texture, and roof coating on a structure that’s already moved through sixty-plus desert summers. Home additions here run $45,000 to $130,000. The price reflects structural upgrades, wind-rated window packages, and the care it takes to make the new section look like it was always there.
Licensed General Contractor in Palm Springs
A Licensed General Contractor in Palm Springs is the difference between a permit that closes cleanly and a project that stalls at final inspection. That’s not marketing copy; it’s a specific legal and practical distinction in this city. Palm Springs has design review overlays in its historic districts, and the building department enforces wind-load and energy requirements that some out-of-area GCs underestimate. We pull every permit, schedule every inspection, and keep a documented paper trail from rough-in to sign-off. It’s part of why customers across the Coachella Valley call us for projects they initially quoted with someone else.
Wind-Load Compliance
Palm Springs sits in a wind zone that requires documented uplift ratings on roof assemblies and impact or high-wind window systems in many applications. When we quote a roof replacement or window package, the line items include the rated product, the fastening schedule, and the inspection sign-off. A cheap bid often skips one of those three, and the savings disappear the first time you file a claim.
Permit and Paperwork Handling
We handle the permit process end to end. For a mid-century home in a designated historic district, that includes design review submissions, materials documentation, and the follow-up corrections the city requests. Our customers don’t sit on hold with the planning department. We coach the submittal, we show up for the inspections, and we deliver a closed permit at the end.
Trusted Brands We Service in Palm Springs
We specify products that survive this desert and meet the wind-load expectations of Palm Springs inspectors. That includes window and door systems from CWS, CGI, ES Windows, and ECO Window Systems. CWS and CGI make sense when you need serious wind ratings on a mid-century replacement that keeps thin sightlines. ES Windows and ECO Window Systems fit more contemporary additions and new ADUs. Because we order direct and manage delivery ourselves, Palm Springs customers get real lead times instead of the vague windows you get from a big-box counter. We stock common installation hardware for these product lines, so a trim or fastener issue on a Palm Springs job doesn’t mean three weeks of waiting.
See the difference
Before
After
Before
After
Before
AfterCommon General Contractor Problems We See in Palm Springs Homes
- Flat-roof draining failures on 1950s-70s tracts: Scuppers and drains clog with windblown palm debris, and monsoon water pools against parapets until it works under the coating. A recover without slope correction just guarantees the same failure next September.
- Stucco cracking from extreme heat cycling: Summer days over 110°F followed by cool desert nights expand and contract exterior finishes. If a contractor bids new stucco without accounting for movement joints and flexible sealants, hairline cracks show up within a year.
- Wind-rated windows installed without documentation: Impact and high-wind packages are only as good as the inspection record. We see homeowners with rated windows but no signed paperwork, which weakens an insurance claim after a wind event.
- Historic district additions that skip design review: Palm Springs neighborhoods with design overlays will flag an unapproved addition or window change. Fixing it after the fact costs more than doing the review up front.
Pricing for General Contractor in Palm Springs, CA
Here’s what we see on current Palm Springs bids. These are the ranges we quote to customers from 92262 through 92292. The final number depends on your home’s specific condition, the products you select, and whether design review applies.
| Project Type | Palm Springs Price Range |
|---|---|
| Roof Replacement | $8,000 – $20,000 |
| Metal Roof Installation | $15,000 – $40,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
Call (877) 752-3154 and we’ll walk the property, talk about what you want, and send a written line-item quote. Estimates are free, and the quote you get is the number we build to, not a starting point.
We Also Serve Cities Near Palm Springs
Our crews work throughout the Coachella Valley, and many of our Palm Springs customers send neighbors to us from Cathedral City, Rancho Mirage, Garnet, and Desert Hot Springs. If you’re in one of those cities and want a General Contractor in Palm Springs without the runaround, call us. We understand the permitting differences from one city to the next, and we quote each one honestly.
Serving Palm Springs, CA — Our Local Coverage Area
We’re based in the Palm Springs area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About General Contractor in Palm Springs
Yes, in most cases. Palm Springs building code requires roof assemblies to meet specific wind-uplift ratings, and the inspector will check that the installed system matches the approved plans. A compliant quote includes the rated membrane or coating product, the fastening pattern, and the inspection record. A bid that doesn’t list those line items is not a real Palm Springs bid. Call (877) 752-3154 and we’ll show you what a documented quote looks like.
Documented compliance is what lets you prove to an insurer that wind-rated products were actually installed and inspected, not just purchased. After a monsoon or high-wind event, that paperwork supports a claim and can affect your premium position. We photograph every layer before it’s covered and hand you the permit sign-off at the end. If you’re mid-claim or planning an upgrade, call us for an estimate and we’ll tell you exactly what documentation you’ll have.
Because Palm Springs has preservation rules that protect the architectural character of its mid-century modern stock, so changes visible from the street must go through design review before the building permit is issued. That includes window swaps, roof changes, and additions on many homes in districts like the Movie Colony and Vista Las Palmas. We prepare the submittal, present the materials, and handle the corrections so you don’t get stuck in review limbo.
A compliant Palm Springs quote lists the rated products with their wind-load specs, the permit and design review fees, the inspection schedule, and the specific materials being installed. A cheap bid will often say “standard roofing” or “contractor grade windows” with no product names and no documentation plan. We specify actual products from CWS, CGI, ES Windows, and others, and we price every line item before we start. Call (877) 752-3154 for a quote that holds up under scrutiny.
Flat and low-slope roofs in Palm Springs pool water when scuppers and drains clog with desert debris, and the heat cycling between 110°F days and cool nights breaks down sealants and coatings faster than pitched roofs. On a post-and-beam mid-century home in the Movie Colony area, our crew found the original built-up flat roof had blistered and pulled at the seams after a summer of heat cycling, and the scupper drains had been clogged so long that monsoon water had backed up under the coating. We tore off to the deck, corrected the slope toward new scuppers, and installed a reflective elastomeric system rated for the wind uplift, documenting each layer with photos for the owner’s insurance file. That’s the repair sequence these roofs actually need, not a quick patch and a promise. For a real fix and a documented file, call (877) 752-3154 for a free estimate.
Written by Noel Trevino, Owner at Moreno Valley Builders, serving Palm Springs and the Coachella Valley.