Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in Palm Springs, CA | Moreno Valley Builders
We provide independent CWS construction service across Palm Springs, CA and nearby communities like CWS service in Cathedral City – cabinet installation, refacing, countertop work, and full kitchen remodeling, all handled by our own crews. What makes our CWS work different here comes down to the houses themselves: Palm Springs is full of mid-century post-and-beam and block-wall homes where nothing is plumb, level, or square, and cabinet runs have to be scribed and shimmed to survive desert movement. Call (877) 752-3154 for a free estimate on CWS cabinet repair, refacing, or a full kitchen remodel in Palm Springs.
Why Palm Springs Residents Choose Us for CWS Service
Most Palm Springs kitchens weren’t built to modern cabinet tolerances. The framing in a 1960s post-and-beam or block-wall home has dried, moved, and settled for sixty years. We’ve spent years pulling and resetting CWS cabinetry in exactly those conditions, so we know where CWS boxes fail in this climate and how to make them hold. Our owner, Noel Trevino, grew up in the Sunnymead Ranch area of Moreno Valley and has spent the better part of three decades building and renovating homes across the Inland Empire. He’s the contractor neighbors call when a project has gone sideways, and he treats every Palm Springs CWS job the same way: figure out what actually failed, then fix it so it stays fixed.
We’re an independent CWS installer and service provider – not authorized, sponsored, or warranted by the manufacturer. Our CWS sales & service work is grounded in the product itself: we know the all-plywood shaker and slab-door lines, the frameless full-overlay boxes, and where each fails in a desert house. That independence means our loyalty is to the home and the homeowner, not a dealer program.
Styles & brands we work with
Common CWS Construction Problems We Solve in Palm Springs
- Door and drawer-front delamination from west and south sun exposure. Kitchens with large glass areas or clerestory windows push cabinet face surfaces well past 110°F in summer. We regularly replace CWS doors where the finish has checked and the veneer has lifted – and we spec doors that hold up to Palm Springs heat cycles.
- Box and frame separation on frameless CWS cabinets. Palm Springs swings from bone-dry to monsoon-humid in weeks. That moisture cycle pulls fasteners out of particleboard-core or thin-panel sides. If the box is sound, we re-fasten and reinforce. If the panel core has crumbled, we replace the box rather than chase it with new fronts.
- Soft-close hinges and drawer glides grinding from desert grit. Homes near open patios, breeze-block walls, and unpaved lots get dust into every mechanism. We clean, replace, or upgrade CWS hardware – and we tell you which glides survive Palm Springs conditions better than others.
- Sagging wall cabinets and out-of-plumb door reveals. This is the big one in older Palm Springs tracts. CWS boxes hung on original 1950s-70s framing that has dried and moved will rack, sag, and leave doors gapped. We re-plumb and re-shim the uppers to the actual wall plane before anything else.
- Water-swollen boxes under sinks and at dishwashers. Monsoon-season flash flooding and a failed supply line both end the same way. We cut out the damaged box, confirm the framing behind it, and reset new CWS cabinetry on a dry, plumb base.
CWS Service in Palm Springs: What Local Conditions Mean for Your Equipment
Palm Springs holds one of the largest concentrations of 1950s-70s desert modernism in the United States, and the city’s historic districts and design-review rules change how CWS work gets done here. Cabinet and finish changes visible from the street or on protected mid-century homes can require approval and sympathetic materials – a permitting layer no neighboring Coachella Valley city imposes on a kitchen reface. If you own a protected modern in a Palm Springs historic district, we handle that layer with you: we know which cabinet door profiles, finishes, and countertop materials read as appropriate to the architecture, and we prepare submittal-ready drawings so the review goes through without a fight. That’s not a generic contractor skill. It’s what Palm Springs specifically demands.
In the Sunmor tract off East Palm Canyon, we pulled a set of CWS shaker wall cabinets in a 1961 post-and-beam kitchen where the boxes had racked against dried-out original framing and three doors had checked from years of west sun through clerestory glass. We re-plumbed and re-shimmed the uppers to the actual wall plane, replaced the failed doors and soft-close glides with genuine CWS parts, and scribed the new cabinet run tight to the block wall before setting quartz counters. The room now closes and opens clean through the monsoon swing.
CWS Models & Products We Service in Palm Springs
Our Palm Springs service area covers the full CWS cabinet range: all-plywood shaker and slab-door kitchen lines, flat-panel and slab-front bath vanities, frameless full-overlay boxes with soft-close drawer systems, and semi-custom runs built for remodel and reface work. When a door or drawer front fails, we source genuine CWS parts when the box is sound. Where the OEM hinge or glide is discontinued or back-ordered, we spec quality aftermarket soft-close hardware – always labeled as aftermarket, never passed off as factory. We stock the common CWS hinges, glides, and touch-up finishes our Palm Springs calls actually need, so most repairs don’t wait on a parts shipment.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in Palm Springs
CWS cabinet and kitchen work in Palm Springs carries a real range because the scope varies widely – a simple re-hinge is one thing, a full kitchen reface inside a protected mid-century home is another. We also handle CWS service in Desert Hot Springs with the same attention to local conditions. Here’s what we typically see:
| Service | Typical Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Small & Partial Kitchen Remodels | $9,000 – $20,000 |
The number that matters for your house depends on the condition of the existing framing, whether historic review applies, and how much of the CWS box can be saved. We give written line-item estimates so you see exactly what’s included. Call (877) 752-3154 and we’ll walk the job with you – the estimate is free.
Serving Palm Springs, CA — Our Local Coverage Area
We’re based in the Palm Springs area and know this community well, from CWS in Rancho Mirage to the east valley. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CWS Construction in Palm Springs
No. We’re an independent CWS installer and service provider. We’re not authorized, sponsored, or warranted by CWS. What that means for you: we recommend the right fix for the house, not the fix that protects a dealer relationship. If a CWS box is sound, we repair it. If it’s water-swollen or the core is crumbling, we say so plainly.
Both, and we label them clearly. We source genuine CWS doors, drawer fronts, hinges, and glide hardware when the box is sound. Where the OEM part is discontinued or back-ordered, we spec quality aftermarket soft-close hardware – always identified as aftermarket, never sold as factory. Call (877) 752-3154 if you want us to check what’s actually on your cabinets.
It’s the grit, not the box. Palm Springs dust gets into soft-close mechanisms, especially in kitchens near open patios and breeze-block walls, and it turns smooth glides into grinding messes. We clean and lubricate where the glide is salvageable, and replace with a better-sealed aftermarket glide where it’s not. The fix is usually same-visit. Call (877) 752-3154 and we’ll take a look.
We work on the all-plywood shaker and slab-door kitchen lines, flat-panel and slab-front bath vanities, frameless full-overlay boxes, and semi-custom remodel and reface runs. If you’ve got CWS cabinets in a mid-century Palm Springs kitchen or a newer tract build, we can spec the repair or reface to match.
Cabinet refacing in Palm Springs typically runs $4,000 to $13,000 depending on run length, door profile, and whether the existing boxes are sound enough to keep. Historic-district review can add time but not a separate contractor fee – we handle that as part of the job. Call (877) 752-3154 for an exact quote on your kitchen; estimates are free.
Service Areas Near Palm Springs
We run the same CWS service across the Coachella Valley and back through the Inland Empire. If you’re outside Palm Springs proper, we also cover Moreno Valley, March Air Force Base, Loma Linda, Highgrove, Mead Valley, and Grand Terrace. Compare our CWS service in Fullerton or CWS service in La Habra if you’re further west – same crew, same standard.
Book Your CWS Service in Palm Springs Today
If your CWS cabinets are delaminating, sagging, or grinding in the Palm Springs heat – or over in CWS in Garnet – we’ll come assess the job and give you a written estimate. If the details aren’t right on paper, they won’t be right in the wall. Call (877) 752-3154 to schedule your free estimate.
Written by Noel Trevino, Owner & General Contractor at Moreno Valley Builders, serving Palm Springs and the Coachella Valley.